User's Manual

The packaging and instruction manual contain important information. Please keep them for future reference.
Contents:
RC vehicle x 1
RC transmitter x 1
Instruction manual x 1
Transmitter antenna x 1
Battery Requirement :
Vehicle : Built in 1.2V rechargable battery (non-replaceable).
Transmitter : 2 x 1.5V "AA" / LR6 alkaline batteries (not included).
Transmitter: Battery and Antenna Installation
1. Open the battery cover using a screwdrive (not included).
2.
3. Fasten the battery cover.
4. Screw the antenna into the transmitter securely.
Vehicle: Battery charging
1. Switch OFF the vehicle.
2. Park and plug the car into the charging terminal of the transmitter
3.
HOW TO PLAY :
1. Switch ON the vehicle.
2. Drive the vehicle forwards and backwards by pressing the FORWARD and BACKWARD buttons respectively.
3. Turn the transmitter steering wheel to move the vehicle left or right.
4. If the vehicle does not run in a straight line, adjust the wheel alignment lever on the vehicle chassis.
5. Remember to switch OFF the vehicle power after playing.
Performance Tips:
1. Do not drive on grass, dirt, sand, carpet or go through water.
2. Do not drive in windy or rainy weather.
3. Avoid direct impact with obstacles.
4. Switch off the vehicle when not in use.
5. Keep fingers, hair and loose clothing away from the wheels.
6. The operating range can be affected by a variety of factors:
Maisto Radio Control Vehicles
A red LED indicator on the transmitter lights up during charging. The
charging cycle complete when the indicator turns off
Install two new AA 1.5V batteries with correct polarity (+/-) as shown
inside the battery compartment.

Summary of content (3 pages)