Installation Instructions

Product Model：21178-0005 PMN: Bluetooth Controller

1. Install the device

1.1 Location and Precautions:

The Bluetooth audio controller can be installed in any suitable position in the car;

Drill a 28mm hole and reserve a 64mm space behind the installation panel.

Do not try to remove the control knob from the controller when installing; the

knob and the controller are one unit.

1.2 When connecting the cable, ensure that the voltage output is 12V, and use the

corresponding plug-in in the car to realize the connection

2. Usage (as shown in figure) :

2.1 Volume Control

Slowly turn the knob clockwise to increase the volume and counterclockwise to

decrease it; If the rotation is relatively fast, it will not increase the speed of the

volume adjustment;

2.2 Switching Power Supply

Press the knob inward for three seconds to turn the device on and off

2.3 Song Selection

Swipe right or down to jump to the next song

Jump to the previous song by swiping up or down

PAGE 1
Product Model：21178-0005 PMN: Bluetooth Controller 1. Install the device 1.1 Location and Precautions: The Bluetooth audio controller can be installed in any suitable position in the car; Drill a 28mm hole and reserve a 64mm space behind the installation panel. Do not try to remove the control knob from the controller when installing; the knob and the controller are one unit. 1.
PAGE 2
FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PAGE 3
-- Consult the dealer or an experienced radio/TV technician for help. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. in portable exposure condition without restriction.