User's Manual

®
2601712
User’s Guide
Please read this user’s guide before using your new remote.
Wireless Remote
for Nintendo Wii
®
2 3 4 5
2 Install the Silicone Skin
1. Insert the remote into the protective silicone skin.
2. Press the cover on the bottom to snugly fit the external
extension connector.
n Notes:
• Thepowerbuttoncanbeoperatedwiththesiliconeskininplace.
• RemovethesiliconeskinbeforeyouconnectaNunchukor
MotionPlusaccessory.
3 Attach the wrist strap
1. Insert the small end
of the strap into the
hole.
2. Loop the larger
end in through the
small end and pull
to secure the strap
firmly.
Caution - Wear the wrist strap
Game play with the Wii Remote can involve vigorous motion.
To avoid losing your grip on the remote and causing injury or
damage to objects and people around you, please be sure that
all players wear a wrist strap during game play.
4. The Player LEDs will blink during synchronizing. When the
blinking stops,the connection is complete.
5. Operate the remote according to the game.
The Wii Remote will cancel synchronization if you:
• turnofftheconsole
• returntotheWiimenu
• resettheconsole.
5 Using your
Wii Remote
1. Open the lever on the
wrist strap lock, loosen
the strap, and place your
hand through the wrist
strap.
2. Slide the strap lock up,
tightening the strap comfortably but securely.
3. Snap the lever closed to secure the lock.
4. Use your remote according to your game’s instructions.
Package contents
• WiiRemote • Siliconeskin
• WristStrap • User’sGuide
• QuickStart
Features
• WorkswithallWiigames
• Speakerenhancesgameplay
• Siliconeskinprovidesacomfortableandmoresecuregrip
1 Install batteries
1. Open the battery compartment cover.
2. Insert 2 AA batteries (not included) into
the battery compartment, matching
the polarity symbols (+ and –) marked
inside.
3. Replace the battery cover.
b Battery Notes:
• Disposeofbatteriespromptlyandproperly.Donotburnorbury
them.
• Useonlyfreshbatteriesoftherequiredsizeandtype.
• Donotmixoldandnewbatteries,differenttypesofbatteries
(alkaline,orrechargeable),orrechargeablebatteriesofdifferent
capacities.
• Ifyoudonotplantousetheremoteformorethanoneweek,
removethebatteries.Batteriescanleakchemicalsthatcandamage
electronicparts.
AA
A
A
4 Set up the Wii Remote
Standard Mode Synchronization
Standard Mode Synchronization adds additional Wii Remotes to
your system or re-synchronizes your original remote.
1. Turn on the Wii console.
2. Remove the remote’s battery
cover. Press SYNC. inside the
compartment. The Player LEDs
will blink.
3. Open the SD Card Slot cover
on the front of the Wii console.
Press the Wii’s SYNC button
inside the compartment.
4. When the Player LEDs blinking stops, connection is
complete. The LED that remains lit indicates the player
number.
nNotes:
• OnlyaWiiRemoteinStandardModecanturnyourconsoleon/off.
• Theremotewillstaysynchronizedwiththeconsoleunlessyou
synchronizetheremotetoadifferentconsole.
One Time Mode Synchronization
One Time Mode Synchronization allows you to temporarily
use your remote with another console. It does not delete the
Standard Mode setting stored in the remote.
1. Press HOME on the remote.
2. Select the Wii Remote Settings option from the Home
menu, then select the Reconnect option.
3. Press 1 and 2 simultaneously on the remote.
OR
SYNC.
2601712_PM_EN.indd 1-5 7/7/2010 6:16:00 PM