User's Manual

®
26-1031[A]
User’s Guide
Please read this user’s guide before using your new
Wireless Controller.
Wireless Controller
for PS3
®
2 3 4 5
Package contents
• Wireless Controller • Receiver
• User’s Guide • Quick Start
Features
• 4-channel receiver communicates with controller up
to 30 feet away.
• PS button lets you play PS2 games on backward-
compatible PS3 consoles.
• Compatible with Windows
®
98SE, Windows ME,
Windows 2000, Windows XP and Windows Vista™.
Install batteries
1. Open the battery compartment cover.
2. Insert 2 AAA batteries (not
included), matching the polarity
(+ and –) marked inside.
3. Replace the battery cover.
Battery Notes:
• Dispose of batteries promptly
and properly. Do not burn or bury them.
• Use only fresh batteries of the required size and type.
• Do not mix old and new batteries, different types of
batteries (alkaline, or rechargeable), or rechargeable
batteries of different capacities.
• If you do not plan to use the controller for a few
weeks, remove the battery. Batteries can leak
chemicals that can damage electronic parts.
Connect to PS3
1. Turn on your console and plug the receiver into the
first port on the console. The RX indicator on the
receiver flashes.
2. Slide POWER
ON/OFF to
ON to turn on
the controller.
The controller’s
POWER
indicator lights
and the 4 port indicators flash.
3. The controller connects with the receiver
automatically after about 3 seconds. If successful,
the RX indicator on the receiver lights.
4. Press the PS button to assign a controller number.
The corresponding port indicator lights.
Manual Search
If you are unable to automatically connect,
try manual adjustment.
1. Repeat steps 1 and 2 under “ Connect
to PS3 .”
2. Press CONNECT on the receiver. The
RX indicator flashes.
PS
• Access the PS3 home menu and
scroll through functions
• Play PS2 games (not all PS3 models
are backward-compatible)
• Assign controller number
• Press twice to wake controller from
sleep mode and assign controller
number
, , ,
Performs various game actions.
SELECT
Selects items in the menu or game.
8-way D-pad
Controls directions and navigates
menu items.
A
A
A
AAA
START
Selects menu items, and starts/
pauses a game.
R-stick (R3) and L-stick (L3)
Controls a range of vertical and horizontal movements.
Shoulder Action: R1, R2, L1, L2
Pressure-sensitive. Use varies by games.
Port 1, 2, 3 and 4
indicators
n Notes:
• Before using your controller,
rotate the sticks once with
your thumbs as if drawing
a circle. Do not twist the
sticks.
• Your controller automatically
enters sleep mode when left
alone for 15 minutes.
• The motion-sensitive feature
is not available for all games.
Please refer to your game’s
instructions for more details
on button actions during
game play.
• Always slide POWER ON/
OFF to OFF after playing to
conserve battery llife.
POWER ON/OFF
26-1031A_PM_101509.indd 1-5 10/20/2009 3:41:02 PM
6 7 8 9 10
Important Ergonomic Information
Medical studies suggest that long periods of repetitive
motion, coupled with poor habits and an uncomfortable
environment, may be linked to certain types of physical
discomfort or injuries including carpal tunnel syndrome,
tendonitis, and tenosynovitis. It is important to take
frequent breaks during game play. If you feel aching,
numbness, or tingling in your arms, wrists, or hands,
please consult a qualified health professional.
Care and use
• Use this controller only as instructed.
• To prevent the risk of fire or shock hazard, do not
expose it to rain or moisture, do not disassemble it,
and do not put foreign objects into the controller.
• Stop using the controller if you have any injury or
ailment in your hands or arms.
Specifications
Power Source.......................... ................2 AAA batteries (not included)
Control distance...................................... ...............................30 ft (9 m)
Frequency.............................................................. .....................2.4 GHz
Specifications are subject to change and improvement without notice.
Actual product may vary from the images found in this document.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a res
idential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interferenc
e
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Ignition L.P. may cause
interference and void the user’s authority to operate the equipment.
This device complies with
Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation
Limited Warranty
Ignition L.P. warrants this product against defects in materials and workmanship
under normal use by the original purchaser for ninety (90) days after the date of
purchase. IGNITION L.P. MAKES NO OTHER EXPRESS WARRANTIES.
This warranty does no
t cover: (a) damage or failure caused by or attributable to
abuse, misuse, failure to follow instructions, improper installation or maintenance,
alteration, accident, Acts of God (such as floods or lightning), or excess voltage or
current; (b) improper or incorrectly performed repairs by persons who are not a
Ignition L.P. Authorized Service Facility; (c) consumables such as fuses or batteries;
(d) ordinary wear and tear or cosmetic damage; (e) transportation, shipping or
insurance costs; (f) costs of product re
moval, installation, set-up service, adjust-
ment or reinstallation; and (g) claims by persons other than the original purchaser.
Should a problem occur that is covered by this warranty, take the product and
the sales receipt as proof of purchase date to the place of purchase. Ignition L.P.
will, at its option, unless otherwise provided by law: (a) repair the product without
charge for parts and labor; (b) replace the product with the same or a comparable
product; or (c) refund the pur
chase price. All replaced parts and products, and
products on which a refund is made, become the property of Ignition L.P. New
or reconditioned parts and products may be used in the performance of warranty
service. Repaired or replaced parts and products are warranted for the remainder
of the original warranty period. You will be charged for repair or replacement of the
product made after the expiration of the warranty period.
IGNITION L.P. EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDIT
IONS
NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES
THAT MAY BE IMPOSED BY LAW, INCLUDING THE IMPLIED WARRANTY
OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY OF
FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION
OF THE STATED WARRANTY PERIOD.
EXCEPT AS DESCRIBED ABOVE, IGNITION L.P. SHALL HAVE NO LIABILITY
OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT OR ANY OTHER
Protect the environment by recycling used electronics. Go to
E-CyclingCentral.com to find an electronic recycling center near you.
PS2, PS3, and Playstation are registered trademarks of Sony Computer
Entertainment Inc. This product is not sponsored, endorsed or approved by Sony.
Windows is a registered trademark and Windows Vista is a trademark of
Microsoft Corporation in the United States and/or other countries.
Printed
in China
10A09
26-1031A
© 2009. Ignition L.P. All rights reserved. Gigaware is a
registered trademark used by Ignition L.P.
Troubleshooting
If the controller stops working at any time, or will not
connect to PS3 follow “Manual Search“ steps on pages
5-6.
3. Press and hold SELECT and L3 (left analog stick) on
the controller simultaneously for at least 3 seconds.
When the RX indicator stays lit, release SELECT and
L3.
4. Press the PS button to assign a controller number.
The corresponding port indicator lights.
Notes:
• Repeat “ Connect to PS3 “ or “ Manual Search “ if
the connection fails again.
• If you purchase a new receiver for the controller,
but have previously been using it with the supplied
receiver, you will have to follow connection steps
again.
Reassigning a controller number
1. Press and hold the PS button for one second.
The functional
screen displays.
Select “ Controller
Settings ”, then
“ Reassign the
controller .” Press X
to confirm.
2. Use the D-pad to
select the number
that matches the
controller’s port.
3. Press X again to confirm. The corresponding port
indicator lights up.
PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE
CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE
PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING,
BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE
AND ANY LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT AND ANY
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF
IGNITION L.P. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some States do not allow limitations on how long an implied wa
rranty lasts or
the exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights which vary from State to State. You
may contact Ignition L.P. at:
Ignition L.P., 3102 Maple Ave. Suite 450, Dallas, TX 75201 02/09
For product support, call
1-866-315-0426
26-1031A_PM_101509.indd 6-10 10/20/2009 3:41:02 PM