Rhein Tech Laboratories, Inc. 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com APPENDIX J: Client: FCC ID: Model: Standards: Date: Maxon Telecom Co., Ltd. RXUSP210U2 SP210 U2 FCC Part 90/IC RSS-119 December 13, 2004 USER’S MANUAL Please refer to the Operator’s Manual. .
SP-200 series Synthesized Scanning Radio FCC RF EXPOSURE COMPLIANCE REQUIREMENTS FOR OCCUPATIONAL USE ONLY The Federal Communications Commission (FCC), with its action in General Docket 93-62, November 7, 1997, has adopted a safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC regulated equipment. Maxon subscribes to the same safety standard for the use of its products.
Table of Contents Safety Information.................................................................. Unpacking Information.......................................................... SP-200 Series Features.................................................... Description of Radio Components......................................... Antenna Installation............................................................... Installing and Removing the Battery Pack...............................
Safety Information The Federal Communications Commission (FCC), with its action in General Docket 79-144, March 13, 1985, has adopted a safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC regulated equipment. Maxon subscribes to the same safety standard for the use of its products. Proper operation of this radio will result in user exposure far below the Occupational Safety and Health Act and Federal Communications Commission limits.
Description of Radio Components 1) Antenna Receptacle 2) Channel Selector Buttons 3) On/Off - Volume Control 4) Busy/TX/BT Indicator 5) Battery Latch 6) Push-To-Talk (PTT) 7) Monitor Button 8) Scan Button 9) Speaker 10) Microphone 11) Accessory Connector 12) Belt Clip 13) Battery 14) Battery Charge Contacts 15) LCD Antenna Installation Fasten the antenna to the radio by turning the antenna clockwise into the receptacle on top of the radio.
Battery Charging and Care To ensure peak performance from your radio, the battery pack must be fully charged. Proper care and charging will allow maximum performance and life of your battery pack. The ACC-400 Desktop Charger provides 1.5 hours charging and normal "slow" charging to one radio and one battery. To receive maximum performance from your radio and battery pack, periodically completely discharge and recharge the battery pack.
SP-200 Series Operations Power On-Volume Turn the radio on by rotating the on/off - volume control clockwise until you hear a click and the self test "alert" tone. Channel Select/Channel Group Select The SP-200 series is capable of up to 13 programmed groups with up to 16 channels per group for a total channel capacity of 199 channels. To change channels press and release the ▲ or ▼ buttons. A press and hold will scroll through your programmed channels.
Status Indicators and Audible Alert Tones Your SP-200 series has a sophisticated microprocessor control which provides a series of audible alert tones. Upon initial power up, a quick melody indicates that the self-test of the microprocessor functions has been completed satisfactorily.
Other Scanning Features · Look Back: Any channel, when not in the scan mode, can be programmed to "look back" at the "Priority" channel. (Remove) This feature is ideal for those who do not need scan as defined above, but want to make sure that they never miss a call on the "Priority" channel if another channel has been selected. Once a "look back" (Remove) channel other than the priority channel has been selected, the radio will periodically "look back" at the Priority" channel.
Priority Channel Edit: Only one priority channel can be programmed into the radio. To edit a priority channel, turn radio off, press and hold scan button, first button beneath the PTT button. While holding scan button turn radio on, release the scan button after the second red flash of the LED and PE is shown in the display. Upon release of the scan button the first channel number will be displayed.
Maintenance Your SP-200 series Radio is designed to be maintenance free. To keep your radio in good working condition: Clean external surfaces with a clean cloth dampened in a solution of dishwasher detergent diluted in water. Apply the solution sparingly to avoid any moisture leaking into cracks and crevices. Do not submerge the radio. Use a non-metallic brush to dislodge stubborn particles, if necessary. Dry the surface thoroughly with a soft, lint free cloth.