Smart Wi-Fi/GSM Alarm System User Manual
Content 01 02 03 Product list Features/Control Panel Appearence Status LED Indication The dual network security system is built to offer convenient, real-time monitoring and flawless home security. It protects your home 7/24. The control panel is the brain of security alarm system, which is able to communicate with all wireless sensors. If an intrusion is detected or if an abnormal amount of smoke is detected, it triggers an immediate alarm and send you notification by SMS, push notification and calls.
Features Working Status of Control Panel Appearance White LED: Arming / Disarming Red LED: Control Panel Status 110dB Siren 24 Hours Protection Wi-Fi + GSM, Double Safety Immediate SMS Alerts Added on up to 50pcs Sensors 3 Groups of SMS 5 Groups of Phone Call 2 Groups of Central Monitoring Station iOS & Android App, Easy to Setup Green LED: AC Power Yellow/Red LED: GSM Signal Indicator Tamper Switch Bracket Hole Wired Interface Loudspeaker SIM Card Slot Power Switch Enroll Button 2 Adapter I
Quick Start Guide No Name Function 1. Installation of The Control Panel Status LED Indication 1 Red LED Normally on: In enrolling status Flashes quickly: Sending SMS or connecting WiFi network in smart mode Flashes once a second: Alarming Flashes once in 2 seconds: connecting WiFi network in AP mode. White LED On: System armed in away mode. Off: System disarmed Flashes slowly: Systems armed in stay mode. Flashes quickly: WiFi network lost. Power/Signal LED Indication A.
2. Using and Testing the Remote Control(s) A. Press the panic button“ ”. A small display on the remote control will briefly light up. A loud alarm tone will immediately sound and the symbol on the control panel will flash red . B. Turn the alarm off again by pressing the disarm “ ” button. Congratulations! Your remote control( s ) are working! 4. Using and Testing the Motion Detector A. Carefully open the cover of the motion sensor by pressing the clip and pull out insulating strip. B.
Wireless P.I.R Motion Detector Status Indicator Features The passive infrared sensor with novel and beautiful style, perfect streamline can be easily installed. It is designed to detect human movement indoor. Adopted advanced fuzzy logic chip and intelligent analysis distinguish signal between body movement and interference to minimize false alarms. The built-in buzzer remind you low battery state and event of tamper alarm, which ensure your safety.
Wireless Door/Window sensor Notice 1. Avoid mounting the detector close to places where heat changes fast or air stream flows frequently. (ie. Air conditioner, tube light, oven, waver, refrigerator etc.) The Door/Window Sensor can be installed on doors, windows and any other objects that open and close. Detection Area Top View Side View 1 3 1.Transmitter 2.Open-close magnet 3.Tamper Switch 4.
Working Status: LED flashes once: Door or window is opened. and the transmitter sends signal to the control panel. 1 5 Mobile App Download 5 Please enter keyword “Smart Life” on your smart phone to download the App from the Apps store or Google Play. LED flashes 5 times, and buzzer beeps 5 times: Tamper alarm, low battery indication. If it’s in low battery state,please replace it only with1.5V/AA LR6 Manganese Dioxide Cell (EXCELL, GP) immediately. Installation: Smart Life 1.
Add Device Enter Wi-Fi Password Connecting Now 21% Change Network Wi-Fi:Ontips Make sure your phone and device are as close to your router as possible. Add device This app is supported only on 2.4GHz Wi-Fi channels Searching for Device Registering device to the cloud Initializing your Device 5. Device added successfully. Then you can rename the device and choose where you place the device.
2 Ways to Control the Alarm System Arm Arm the system when leaving your home. All sensors will be activated. Any sensors that are triggered will immediately sound the alarm. Note! Electical Facility is Off as default. To activate electrical facility, AC power of control panel must be on. Disarm Disarm the system when entering your home. All sensors will be deactivated allowing you to move freely . Two-way Talk Listen into the roon via the control panel and also speak with people in the room.
Accessories Management Alarm Notification Push Notification SMS Call Mark Smart Alarm WiFi ON Smart Alarm WiFi OFF Tap on " " icon the into accessories menu, you can customise the accessory name, select the zone type,and also delte the accessory from the app, if required. Accessories Enrollment & Zone Accessories in the standard kit were enrolled by default. More accessories can be paired in two ways.
How to trigger different accessories: The alarm is activated immediately when triggered. Press any button on the remote control. Move the transmitter away from the magnet Press the black button on the rear of the motion sensor. 1 1 System beeps once, the LED light flashes once, the enrollment is successful. 2 2 If system beeps twice and the LED light flashes once, the accessories have been enrolled before. 3 3 If three beeps are heard and LED light flashes once, the storage is full.
Device Setup Central Monitoring Station Setup Google Home Security Code Use the security code to disarm the alarm system via Google Home. 2. Report Upload Voice Control for Google Home: Disarm "device name". Set "device name" to home mode Set "device name" to away mode Siren Duration Time User can set the siren duration from 0s to 300s, the device will be in mute when user set it 0s. 3.
GSM Signal Monitor User can set the siren to be audible or silent when it’s alarming. Sim Card Balance SMS Access Code A Device Language Door Sensor Monitoring If you leave a door or window open when you arm the system, the alarm will send a alert notification. User can check the real-time status of which sensor is "open" on the sensors list. 24 Add phone number of the one you insert in the alarm system.
Smart Other APP Settings Tap on "Smart" to add smart scene or automation of your connected devices. For example, arm the system, and turn off the smart bulb. Or disarm the system, and then turn on the smart bulb. Or to excute the actions according to different condictions. For example, when temperature greater than 40℃,trigger the alarm system. My home Add devices Home Management Family settings: Name change/ Room managment/Family location/ Share advices Add Family/Add rooms.
Me 1. Check the activities of the system 2. Add other services, like Alexa... 3. Write down and send us your issues or complaints or any feedback. 4. Sound: Turn on/off the sound of the key on APP. Notifictaion: Receive the push notifiction or not.
Wired Interface 1 Wired Interface 2 Ground Common Port Send this operation code from your cell phone Normal Open Normal Close Power Output for Wired Accessories Ground Wired Accessories: It supports 2 groups of wired accessories. Please choose the wired sensor types after connected. Connect Wired Sensor to Wired Zone 1 Connect N.C. Type Door Sensor to Wired Zone. One cable for the IN1 or IN2 block, another for GND block. Send text 74 to choose wired sensor type to be N.C.
Specifications DC1.5V (AA Battery ) Product Name : Wi-Fi/GSM Alarm Sytem Control Panel’s Power Supply : Input: AC 110~240V/50~60Hz 25 70 Output: DC 12V/1000mA GSM Working Frequency : FHSS 433MHz Standby Current : 200 mA without power supply. 150 mA when power supply on. Alarm Maximum Current ≥350mA Internal Battery Backup : Lithium Battery: 3.
x 2pcs)(EXCELL, GP) 20 30 FHSS 433MHz 2pcs 25 All available Smart Life Apps are free to download (App Store or Google Play). The complete functionality is free.
2. Why PIR Motion detector does not detect movement? It’s 100 meters in open area. The walls might shorten the distance, it’s recommended to install the accessories at the right place, and move the panel to adjust a better signal receiving. If the house is too large, it’s better to add a signal repeater to boost the coverage. A. Please make sure the control panel is in arming status, not at stay (home)mode or disarming status. B.
RF Exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.