Air-Powered Full-size Die Grinder Model no. 058-9366-0 IMPORTANT: Please read this manual carefully before using this product, and save it for reference.
TM TABLE OF CONTENTS TECHNICAL SPECIFICATIONS SAFETY GUIDELINES KEY PARTS DIAGRAM TECHNICAL INFORMATION OPERATING INSTRUCTIONS MAINTENANCE TROUBLESHOOTING EXPLODED VIEW PARTS LIST WARRANTY NOTE: If any parts are missing or damaged, or if you have any questions, please call our toll-free helpline at 1-888-670-6682. SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions. Read all instructions and follow them with use of this product.
4 TM model no. 058-9366-0 | contact us 1-888-670-6682 TECHNICAL SPECIFICATIONS This manual contains information that relates to PROTECTING PERSONAL SAFETY and PREVENTING EQUIPMENT PROBLEMS. It is very important to read this manual carefully and understand it thoroughly before using the product. The symbols listed below are used to indicate this information. COLLET 1/4" (6.4 mm) SPEED (NO LOAD) 22,000 RPM CFM REQUIREMENT 3.
6 TM model no. 058-9366-0 | contact us 1-888-670-6682 Risk of personal injury. Do not direct compressed air from the air hose toward the user or other personnel. • Do not use oxygen or any other combustible or bottled gas to power air-powered tools. Failure to observe this warning can cause explosion and serious personal injury or death. Use only compressed air to power air-powered tools. Use a minimum of 25' (7.6 m) of hose to connect the tool to the compressor.
8 TM model no. 058-9366-0 | contact us 1-888-670-6682 • Keep proper footing at all times in order to ensure correct balance. • Do not wear watches, rings, bracelets, or loose clothing when using any air tool. • For optimal safety and tool performance, inspect the tool daily in order to ensure free movement of the trigger, safety mechanisms, and springs. • Keep the work area clean. A cluttered or dirty workbench may lead to an accident. Floors should be kept clear. • This tool is not a toy.
10 TM model no. 058-9366-0 | contact us 1-888-670-6682 General usage description No. Description No. Description 1 Air inlet 3 Trigger 2 Lock-off switch 4 Grinding collet/Chuck The MAXIMUM® Air-powered Full-size Die Grinder features a durable, lightweight composite housing designed to reduce vibration. The tool has a throttle-lever designed with a lock-off mechanism for added safety. Exhaust is discharged through the rear of the grinder.
12 TM model no. 058-9366-0 | contact us 1-888-670-6682 AIR TOOLS Read this instruction manual thoroughly or have tool operators read thoroughly before using the tool. 5 3 6 1 4 2 No. Description No. Description 1 Maximum Air-powered Full-size Die Grinder 5 Filter 2 Air hose 6 Cut-off valve 3 Lubricator 7 Air compressor 4 Regulator 0 123 PSI (0 8.5 bar) ® 7 • Read all safety guidelines (see section “Safety Guidelines”) at the beginning of this manual.
14 TM model no. 058-9366-0 | contact us 1-888-670-6682 LOADING AND OPERATION Fig. A 1. Disconnect the tool (1) from the air hose (2) (Fig. A). 2. Use the two wrenches (1) to loosen the chuck (2). Insert a suitable grinding accessory into the collet and firmly retighten the collet to lock the grinding accessory in place using the wrenches (Fig. B). Fig. B 2 3.
16 TM model no.
18 TM model no. 058-9366-0 | contact us 1-888-670-6682 Troubleshooting The following chart lists common issues and solutions. Please read it carefully and follow all instructions closely. PROBLEM POSSIBLE CAUSES SOLUTIONS Tool runs at normal speed but loses control under load 1. Worn or damaged 1. Lubricate clutch housing. motor parts. 2. Check for excess clutch oil as 2. Cam clutch is worn or the clutch requires only fifty stuck due to percent of oil fill.
No. Description Qty No. Description Qty 1 Air inlet plug 1 17 Back cover 1 2 Housing sleeve 1 18 Cylinder 1 3 Logo 2 19 Rotor 1 4 Pin seat 1 20 Rotor blade 4 5 Pin 1 21 Pin 2 x 6 2 6 O-ring 4.8 x 1.6 1 22 Rotor sleeve 1 7 O-ring 5.
22 model no. 058-9372-4 058-9366-0 || contact contact us us 1-888-670-6682 1-888-670-6682 This MAXIMUM product is guaranteed for a period of 5 years from the date of original retail purchase against defects in workmanship and materials only and is subject to the following components: a) Component A: The carrying case is guaranteed for a period of 1-year from the date of original retail purchase against defects in workmanship and materials.
24 TM model no. 058-9366-0 | contact us 1-888-670-6682 Additional Limitations This warranty applies only to the original purchaser and may not be transferred. In addition to the 5-Year Limited Warranty, this MAXIMUM product is covered by our: This warranty applies for a period of 5 years from the date of original retail purchase, as indicated on the bill of sale.
