Assembly Instruction

PRO

Bongo 2-Light Pendant / Semi-Flush Mount

DUCT NAME:

ITEM

10011

NUMBER:

B 2x60W Medium Base Bulb

Pendant Semi-Flush Mount

ulb (not included):

Page 1 of (3)

Please consult your electrician for hanging fixture and wiring.

MADE IN CHINA

PAGE 1
R PRODUCT NAME: Bongo 2-Light Pendant / Semi-Flush Mount ITEM NUMBER: 10011 Please consult your electrician for hanging fixture and wiring.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation (A)Bracket (B)Canopy (G)Glass (C)Ball Nuts 2Pcs (H)Nipple (D)Mounting Screws 2Pcs (I)Metal Washer (E)Hex Nuts 3Pcs (J)Rubber Washer (F)Rods(1*6”+3*12”)*1 (K) Cap (L)Finial Locate all hardware & components before discarding packaging A D A D B 1.) B C C Step1:Remove mounting bracket from fixture and install to electrical box. F Coupler Shade 2.
PAGE 3
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation Locate all hardware & components before discarding packaging A D 3.) B C F Step3:Run wire through stems and combine stem lengths to meet desired mounting height. 4.) E I G E H J K B C L Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner. Step4:Wire fixture to wires in outlet box. Copper wire is for Ground.