Installation Instructions

USB Bluetooth audio adapter instruction

(supporting win7/8/10 and Mac OS)

Model: USBD-BT02

1> Insert the USB Bluetooth audio adapter into the computer, and turn on the device to enter

the Bluetooth

pairing status (If you use a USB Bluetooth adapter to connect to the conference plat, please

connect it to

the front-mounted USB port of the conference plat to ensure best use effect);

2>USB Bluetooth audio adapter will be automatically connected to the device(which is the only

device bound

by USB Bluetooth audio adapter);

3>If it is necessary to re-pair the USB Bluetooth audio adapter to the new wireless

omni-directional speaker,

the distance between the USB Bluetooth audio adapter and the wireless omni-directional

speaker should be

controlled within 3 meters. When Bluetooth is disconnected from the wireless omni-directional

speaker, long

press and hold the Bluetooth key for 9 seconds to enter the binding mode. After plugging the

USB Bluetooth

audio adapter, the USB Bluetooth audio adapter will be rebound successfully within 30 seconds.

FCC statement

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment.

FCC Caution:

PAGE 1
USB Bluetooth audio adapter instruction (supporting win7/8/10 and Mac OS) Model: USBD-BT02 1> Insert the USB Bluetooth audio adapter into the computer, and turn on the device to enter the Bluetooth pairing status (If you use a USB Bluetooth adapter to connect to the conference plat, please connect it to the front-mounted USB port of the conference plat to ensure best use effect); 2>USB Bluetooth audio adapter will be automatically connected to the device(which is the only device bound by USB Bluetooth audio
PAGE 2
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction.