SÄKEE RIDE ON BUMPER CAR WITH 2 BATTERIES Contact us: maxlead.us@gmail.
Safety Instruction When using electrical product, basic safety precaution should always be followed including the following Read all Instruction before use • To Protect against electrical shock, do not immerse cord, charger, transformer, battery, or the product in water or other liquid. • Only use charging devices, transformer, and battery provided or recommended by the manufacturer. • For your children’s safety, the product should by assembled by adult. • This toy is not intended for children below 1.
Parts and Feature 1. 2. 3. 4. 5. Vehicle Body Seat Cover Seat Belt Joystick Power Button 6. 7. 8. 9.
Assembly Instruction Step 1 Connect the battery wires For Safe Transportation, the batteries are not pre-connected. So you need to connect the battery wires before use. Unscrew the screws and remove the seat cover. Then connect the battery wires. Red to red, black to black. Then Put back the seat cover and tighten the screws.
Step 2 Note: Charging the battery Turn off the bumper car before charging. • For first charging : Charge the bumper car for 4-6 hrs. But no more than 10 hours. • For normal charging : Charge the bumper car for 8-12 hrs. But no more than 20 hours. • Charging indicator : If the batteries are totally empty, the charging indicator is green at the beginning of charging, then turn to red during charging, finally turn to green when fully charged.
⚠ WARNING • Close supervision is needed when children is operating the vehicle. Care and Maintenance • Check the product regularly and make sure there is no missing or loose parts. Re-tighten any loose parts if necessary. • Make sure there is no cracked or broken plastic parts. • When not using, store the product away from heat source, cover it with a tarp and away from wet weather. • Turn off the product and disconnect the battery if the product is not use for a long period of time.
Troubleshooting Customer Service: maxlead.us@gmail.com Problem Vehicle does not move Vehicle does not run very long Vehicle runs very slow Possible Reason Solution Low Battery Fully charge the battery Disconnected / Badly connected battery Reconnect the battery. Failed battery / engine Contact Customer Service Low Battery Fully charge the battery Old Battery Replace battery . Contact Customer Service if necessary Low Battery Fully charge the battery Old Battery Replace battery .
Problem Control is not working Possible Reason No battery installed Insert two batteries Pairing failed Follow the step 3 to repair Out of remote control range The remote control shall not exceed 25m. Contact Customer service if necessary Broken control Charger feels warm with charging Solution Contact Customer Service Normal Please contact us at maxlead.us@gmail.com if you have any problems.