STEREO WIRELESS BLUETOOTH HEADPHONES model: AF62 USER MANUAL part of the series
EN TABLE OF CONTENTS Product Overview Charging Powering On and Off Pairing with Bluetooth® Devices iPhone®, iPad®, and iPod touch® Android™ Phones and Tablets Computers and Laptops Pairing with Bluetooth devices using NFC Connecting to Paired Devices Using the Air-Fi Matrix2 Headphones Adjusting Volume Controlling Phone Calls Controlling Media Playback Additional Functionality Multipoint Using as a Wired Headphone Safety and Care Specifications Troubleshooting Warranty MEElectronics and its logo are regis
PRODUCT OVERVIEW EN
CHARGING *** You must completely charge the headset before the first use *** Connect the USB charging cable to any powered USB port and to the USB jack on the right ear cup. The red LED indicator will light solid while charging. Charge time is typically 3-6 hours for the first charge and 2-3 hours for subsequent charges. When the battery is fully charged the bright red LED indicator will turn off.
PAIRING WITH BLUETOOTH® DEVICES *** It is only necessary to pair your Matrix once with each device *** a) Open the Bluetooth menu* on the device you wish to pair. Some devices require you to select “search for devices” or “add new devices” in order to create a Bluetooth pairing. b) Make sure the Air-Fi Matrix2 is off and within 1 meter of your device. Initiate pairing mode by pressing the Power button for 6 seconds, until you hear “ready to pair, turn on Bluetooth, the pin code is 0000”.
PAIRING WITH BLUETOOTH DEVICES USING NFC Note: When the volume reaches the minimum or maximum level there will be two short tones. a) Put the Air-Fi Matrix2 in pairing mode b) Place the NFC-compatible device against the left ear cup of the Air-Fi Matrix2 until pairing is complete.
USING THE AIR-FI MATRIX2 HEADPHONES Adjusting Volume Function Operation Increase volume Single press or press and hold the Volume Up button Decrease volume Single press or press and hold the Volume Down button Notes When the volume reaches the minimum or maximum level the Matrix will produce a short tone. Note: In standby mode and while playing media with most devices, volume adjustments will only change the volume of the Air-Fi Matrix2.
USING THE MATRIX2 HEADPHONES (Continued) Controlling Media Playback Status Function Operation No media playing1 Play media Press the Play/Pause Either media playing or stopped2 Skip to next track Press the Next Media playing 1 2 Pause media playback Press the Play/Pause Restart the track/previous track Press the Previous button button button button You may need to focus on the media player application for initial playback to start. Not all media players support this functionality.
MULTIPOINT Multipoint Pairing Multipoint allows two Bluetooth devices to be connected to the Air-Fi Matrix2 simultaneously. Both devices will need to be paired before multipoint can be used. To use two Bluetooth devices with the Air-Fi Matrix2, first pair them by following the pairing procedure described in the Pairing with Bluetooth devices section for each device and then turn off the headset.
USING AS A WIRED HEADPHONE The Air-Fi Matrix2 comes with a 3.5mm audio jack on the left ear cup and an audio cable for wired use. This allows use with in-flight entertainment devices, devices that don’t have Bluetooth or aren’t paired, or when the battery is depleted. The Air-Fi Matrix2 can be used wired while still connected via Bluetooth to another device.
www.meelec.