User Instructions

11
ENGLISH
BEFORE YOU BEGIN
LEVELING THE EQUIPMENT
It is extremely important that the levelers are correctly
adjusted for proper operation. Turn leveling foot
clockwise to lower and counter-clockwise to raise unit.
Adjust each side as needed until the equipment is level.
An unbalanced unit may cause belt misalignment
or other issues. Use of a level is recommended.
LOCATION OF THE UNIT
Place the equipment on a level and stable surface away from direct sunlight. The
intense UV light can cause discoloration on the plastics. Locate your equipment in
an area with cool temperatures and low humidity. Please leave a clear zone on all
sides of the equipment that is at least 60 cm (23.6”). This zone must be clear of any
obstruction and provide the user a clear exit path from the machine. Do not place
the equipment in any area that will block any vent or air openings. The equipment
should not be located in a garage, covered patio, near water or outdoors.
WARNING!
Our equipment is heavy, use care and additional help if necessary when
moving. Failure to follow these instructions could result in injury.
PROPER USAGE
1. Sit on the cycle facing the handlebars.
Both feet should be on the floor
one on each side of the frame.
2. To determine proper seat position, sit on
the seat and position both feet on the
pedals. Your knee should bend slightly at
the furthest pedal position. You should be
able to pedal without locking your knees or
shifting your weight from side to side.
3. Adjust pedal straps to desired tightness.
4. To get off of the cycle, follow the
proper usage steps in reverse.
TRAINING AREA
2 M
(78.7”)
0.56 M
(22.2”)
1.45 M
(57.2”)
FREE AREA
2 M
(78.7”)
1.76 M
(69.4”)
2.65 M
(104.4”)