BBW9576-3 110V Installation & Operating Instructions for the Parrotuncle Owner's Installation ,Manual WARNING:SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER BBW9576-3 110V 3-LIGH T CH ANDELIER
BBW9576-3 110V Installation & Operating Instructions for the Parrotuncle Owner's Installation ,Manual WARNING:SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER PACKAGE CONTENTS B A D C H I K J F N M G L E P AR T A B C D E F G DES CR IP TION Canopy Mounting Bracket Threaded Nipple Hex Nut Socket Coupling Hanging chain QTY. 1 1 1 3 3 1 3 P ART H I J K L M N DES CR IP TION Screw Collar Ring Screw Collar Loop Fixture Loop Chain Circular lamp body Suspension rod Upper lamp body QTY.
BBW9576-3 110V Installation & Operating Instructions for the Parrotuncle Owner's Installation ,Manual WARNING:SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER H ARDW ARE CONT ENTS AA Wire Connector Qty: 3 BB Short Machine Screw Qty: 2 S AFET Y INFOR M ATION Please read and understand this entire manual before attempting to assemble, operate or install the product. . . . . . W ARN ING IMPORTANT: NEVER attempt any work without shutting off the electricity.
BBW9576-3 110V Installation & Operating Instructions for the Parrotuncle Owner's Installation ,Manual WARNING:SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER ASSEMBL Y INSTR UC TIONS 1. Suspension rod (M) Upper lamp body ( N ). 1 N Not e: Pass the main line of the lamp body through the suspension rod and upper lamp body, and then tighten the suspension rod and upper lamp body onto the lower lamp body. M 2.
BBW9576-3 110V Installation & Operating Instructions for the Parrotuncle Owner's Installation ,Manual WARNING:SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER ASSEMBL Y INSTR UC TIONS 4. Once the proper position of the threaded nipple (C) a d mounting bracket (B) has been determined, secure with hex nuts (D) as follows: . . . Screw one hex nut (D) onto the threaded nipple (C) and tighten against the raised portion of the mounting bracket (B).
BBW9576-3 110V Installation & Operating Instructions for the Parrotuncle Owner's Installation ,Manual WARNING:SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER ASSEMBL Y INSTR UC TIONS 7. Wire connection guide: Ground wire: . For i nsta llation in the United S tates : Wrap ground wire from outlet box around ground screw preassembled on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). .
BBW9576-3 110V Installation & Operating Instructions for the Parrotuncle Owner's Installation ,Manual WARNING:SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER ASSEMBL Y INSTR UC TIONS 9. Ins ert 40-watt max. candelabra-base incandescent bulb or CFL /LED equivalent (none included) into socket (E). 9 E 10 Wooden bead diagram The wooden bead string is hung on the lamp body in sequence. C ARE AND M AINTEN ANCE . Always be certain that electric current is turned off before cleaning this item. .
BBW9576-3 110V Installation & Operating Instructions for the Parrotuncle Owner's Installation ,Manual WARNING:SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER W ARR AN TY Parrot Uncle warrants that its products will be free from defects in material and workmanship for one (1) year from the date of purchase by the Original Purchaser.