Quick Installation Guide

ManualsBrandsMATRIX COMSEC PVT ManualsElectronicsCOSEC ATOM

Table Of Contents

COSEC ATOM RD100

Safety Instructions

Cautions

WARNING

Quick Installation Guide

These instructions are intended to ensure that the user can

use the product correctly to avoid danger or property loss.

Do not install the device:

Ÿ On unstable surface.

Ÿ Where ferromagnetic field or noise is induced.

Ÿ Where static is created, such as desks made of plastics, carpets.

Ÿ Near volatile inflammable materials or inflammable goods such as

drapes.

Ÿ Where volatile gas and/or inflammable gas is created.

Ÿ Installing and servicing should be done only by qualified

technician.

Ÿ There are no user-serviceable parts inside.

Ÿ Opening or removing the device cover may result in electric

shock or exposure to other hazards.

Ÿ Use the device only for the purpose for which it was designed.

ATOM RD100KM, ATOM RD100KI

ATOM RD100M, ATOM RD100I

11.19"

Summary of content (10 pages)

PAGE 1
COSEC ATOM RD100 ATOM RD100KM, ATOM RD100KI ATOM RD100M, ATOM RD100I Safety Instructions These instructions are intended to ensure that the user can use the product correctly to avoid danger or property loss. Cautions Do not install the device: Ÿ Ÿ Ÿ Ÿ On unstable surface. Where ferromagnetic field or noise is induced. Where static is created, such as desks made of plastics, carpets. Near volatile inflammable materials or inflammable goods such as drapes.
PAGE 2
CONTENTS Know your ATOM Ÿ COSEC ATOM RD100 is a slave reader which can work with COSEC Know your Reader 4 What Your Package Contains 5 ARGO, COSEC VEGA, COSEC PATH V2 using RS-232 and with COSEC ARC DC200 using RS-485. It can also work with 3rd party Wiegand and OSDP interfaced Access Control Panel. Things You Will Need 5 Ÿ It is an intelligent compact Access Control Device which supports Installing ATOM RD100 6 Bluetooth and Card Credentials for Access Control and Time & Attendance.
PAGE 3
What your Package contains Ÿ ATOM RD100 Unit (with cable assembly) Ÿ Wall Mounting Screws (2 nos.) Ÿ Plastic Screw Grips (2 nos.) Things You will Need Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Power Drill Screw Driver Set A Wire Striper Insulation Tape Necessary Cabling Wiegand supported device Access to COSEC Server Application to configure COSEC ATOM RD100 Installation Step 1 Removing the Mounting Plate Ÿ From the top of the COSEC ATOM, unscrew the Mounting screw with the help of screw driver as illustrated in Figure 4.
PAGE 4
Step 2 Connecting the Cables Ÿ You can mount COSEC ATOM in two ways : Concealed Wiring or Non-concealed Wiring as explained below. 2. Affix the mounting plate with the help of the screws and screw grips through the holes A and B. A. Concealed Wiring 1. Take the Mounting Plate and trace screw holes A & B. Trace out the area C also. Drill along the marking as shown below.
PAGE 5
3. Lead the cables from the wall through the drilled area C of the Mounting Plate as illustrated in Figure 8. Connect the necessary cables with COSEC ATOM. B. Non- Concealed Wiring 1. Follow the Step: 1 and Step: 2 as explained for the Concealed Wiring and fix the mounting plate on the wall. (For non-concealed wiring, you do not need to drill the area C for the cables to be led.
PAGE 6
2. Unscrew the Back Plate screw with the help of screwdriver and remove the Back Plate. 3.Pull out the Cables from the Back Plate hole and lead the cables outside from the bottom opening of COSEC ATOM, as illustrated in Figure 10. Figure 11 Back Plate Figure 10 Step 3 4. Connect the necessary cables and align the COSEC ATOM body with the Mounting Plate. 11 Inserting Mounting Screw 1.
PAGE 7
Technical Specifications Specification Parameters Remarks Credential Support Card and Mobile credential over BLE User Capacity Depends on Master Device Card storage Capacity Depends on Master Device **Type of Card HID I - class, MIFARE / Desfire / Combo Cards / NFC Card Read Range R MIFARE -6 cm or more, Desfire Ev1-Atleast 4 cm Reader Interface Type RS-232, RS-485 and Wiegand Interface Support Length RS-232 (10ft), RS-485 (1200 meter), Wiegand (150 meter) Input Power 9-14 VDC through main do
PAGE 8
** The type of Supported Card in COSEC ATOM is different as per their variants; (ATOM RD100KM, ATOM RD100KI, ATOM RD100M, ATOM RD100I). Refer COSEC Server User Guide for the type of supported card in each variant.
PAGE 9
Connecting the Reader 1. RS-232 connectivity for COSEC Doors - COSEC VEGA, COSEC PATH and COSEC ARGO. 2. RS-485 connectivity for COSEC ARC. 3. Wiegand connectivity for 3rd party Access Control Panel.
PAGE 10
FCC Caution: Disposal of Product after End-Of-Life Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. WEEE Directive 2002/96/EC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.