Installation Instructions

Features
Capabilities
Wireless Remote Lighting Controller
Luxmatic CL400
Remote monitoring (Fault monitoring, Remote control, Scheduling)
Dimming Control (0-10V, 0~100%)
Power consumption measurement (Energy use trend, Total usage, Energy saving)
Event history (Control event history, Usage information)
GPS-based schedule control
Built-in illuminance sensor
Digital Input for movement detection sensor Input
Wireless remote lighting controller, CL400 is an intelligent device
that monitors the status of outdoor lighting such as energy measurement
and tracking abnormality of lamps, and controls on/off/dimming
by using two-way wireless communication.
Check and manage the lights with smartphone and tablet
anywhere, anytime.
Smartphone app for easy setup and management
Supports smartphone apps that provide all the information related to the outdoors lighting during installation or maintenance.
Network Security
Applied * AES 128/256 algorithm to ensure high security for public facilities lighting that is directly connected with public safety.
*AES(Advanced Encryption Standard) - US government standard encryption algorithm. Ensure high security stability.
Lamp management (Life prediction, Status monitoring, Fault notification)
Predicts lamp life and notifies the abnormality of the lamp to the administrator.
Firmware Upgrade
Support OTAP (Over-The-Air-Programming) function that can easily add functions and upgrade Firmware for complement.
Data and settings preserved in case of power failure
The main data and settings are stored in non-volatile memory (EEPROM).
It prevents operation problem since the final data and setting values are reflected during the recovery after the power failure occurs.
Manage outdoor lighting remotely.