60" x 24" Workbench Actual product may differ slightly from image shown Model #: 211-4314 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference.
TABLE OF CONTENTS Safety Symbols.......................................................................... 2 Safety Instructions...................................................................... 3 Parts List.................................................................................... 4 Assembly.................................................................................... 5 Maintenance and Safety.............................................................
SAFETY SYMBOLS Model #:________________________________ CAUTION: 1. Read and follow all safety and assembly instructions before using this product for the first time. 2. Fill in the following information and retain the manual for future reference: Place of purchase:_______________________ Date of purchase:________________________ Receipt # of purchase:___________________ Do not stand or lean on the worktop. Do not allow children near the unit. Do not lift unit by yourself.
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not by themselves eliminate any danger. The instructions and warnings they give are no substitute for proper accident prevention measures.
PARTS LIST For service regarding parts, assembly or warranty information, please call 1-800-459-4409. 1 2 Ref# Description Part# Qty 1 Adjustable Feet 313068 4 pcs 2 M6 x 16 mm Hex Bolt 320327 42 pcs Give this information for service parts: part number and quantity.
ASSEMBLY ATTACH THE POSTS Lay the wood top upside down on a soft mat for protection. Identify the front and back of the wood top. Note the locations of the holes in the diagram below. Front ATTACH THE CROSS BRACES Attach the three long cross braces and two short cross braces using M6 x 16 mm hex bolts. The cross braces should be attached in the locations shown in the diagram and as described below: 1 X LONG CROSS BRACE: Attach to top back.
MAINTENANCE AND SAFETY ATTACH THE ADJUSTABLE FEET Screw the four adjustable feet into the bottom of the posts. Turn the workbench upright. MAINTENANCE Periodically clean the frame and wood top with mild detergent and water. Grease and oil can be removed with most standard cleaning fluids. For safety, use a nonflammable cleaning fluid. SAFETY CAUTION: The maximum product weight, including contents, should be no more than 2000 lbs. WARNING: DO NOT stand or lean on the work top.
NOTES Page 7
NOTES Page 8
NOTES Page 9
60" x 24" Workbench LIMITED LIFETIME WARRANTY MASTERFORCE® workbenches have been manufactured to the highest standards of quality and workmanship and are warranted to be free from defects in materials and workmanship under normal use for the lifetime that you own the product. If any part of the product is found to be defective during normal use, the defective product or part will be replaced at our discretion.
©2019 Menard, Inc.