Grill Body Instruction Sheet

Gravity Fed Grill CGP24G1D

• Always remove plug from outlet before servicing your grill.

• Make sure your grill has fully cooled to avoid burns.

• Some components may have sharp edges. Use caution to avoid injury.

CAUTION

9804190243 210730-GH

Remove: grates/griddle, warming racks, manifold, charcoal from hopper, ash grate, ash can,

grease tray, slides, hopper ash door, any other accessories on the grill.

Disassembly

Remove the manifold support bracket (2 screws) Remove front folding shelf (4 screws)

2 SCREWS

4 SCREWS

PAGE 1
Grill Body Instruction Sheet Gravity Fed Grill CGP24G1D CAUTION • Always remove plug from outlet before servicing your grill. • Make sure your grill has fully cooled to avoid burns. • Some components may have sharp edges. Use caution to avoid injury. Remove: grates/griddle, warming racks, manifold, charcoal from hopper, ash grate, ash can, grease tray, slides, hopper ash door, any other accessories on the grill.
PAGE 2
Disassembly 4 3 4 SCREWS Unplug wires from the controller.
PAGE 3
Disassembly 10 9 3 SCREWS 2 SCREWS 2 SCREWS Remove shroud (7 screws) Unplug the wiring harness. 12 11 4 SCREWS 2 SCREWS Pull the hopper wires through the leg brace hole. Remove hopper (6 screws). Pull the hopper off the body and set to the side. 13 14 6 SCREWS Turn the grill upside down on the lid. Remove 6 screws from the legs.
PAGE 4
Disassembly 16 15 3 SCREWS 3 SCREWS Remove 6 screws from the legs. Take the legs off the body. 18 17 2 BOLTS Remove 2 bolts that hold the lid to the body. Remove the body from the lid. Assembly 1. Screw the lid onto the body (see step 18). 2. Screw in the leg assembly to the new grill body (see steps 14 and 15). 3. Screw in the hopper to the grill’s body using six (6) screws (see step 12). 4. Plug the wiring together (see steps 10 and 11). 5.