Controller Instruction Sheet

Manual Code: 9804190129 210413-GH

Gravity Fed Grill CGP24G1D, CGP28G1D, CGP30G1D

• Always remove plug from outlet before servicing your grill.

• Make sure your grill has fully cooled to avoid burns.

• Some components may have sharp edges. Use caution to avoid injury.

CAUTION

Disconnect the four (4) cords from

the back of the control panel.

Unscrew the antenna.

INSTALLATION:

• Insert the control panel into the side shelf and tighten the four (4) screws into its back to secure it in place (see step 3).

• Install the antenna by screwing it onto the back of the panel. Then, turn the top portion of the antenna as shown (see step 2).

• Connect the three cords from inside the grill to the digital control panel (see step 1).

2 3

Unscrew the four (4) screws

holding the panel in place.

Power cord

Cordon d’alimentation

Cable de alimentación