Instructions / Assembly

MASTER PAINTS & CHEMICAL CORP. CARR # 127 KM. 12.7 BO. MAGAS. GUAYANILLA PR 00656
Tel: [phone] / Fax: [phone] / e-fax: [phone]
Rev. May 05, 2014
Page 1 of 2 Supersedes September 2013
Masterflex® Reflective
Maximum Energy Saving Reflective Roof Sealer
Reflective Mirror Cool Roof Technology
SECTION 1 - PRODUCT DESCRIPTION
SECTION 2 - TYPICAL USE
SECTION 3 - PRODUCT ADVANTAGE
SECTION 4 - COLOR
SECTION 5 - GLOSS
SPEC DATA SHEET
Masterflex® Reflective is an ultra white, high reflective,100% acrylic elastomeric roof sealer, designed for fixing leaks in roofs and walls,
caused by capillarity, cracks or joints when adding new constructions to existing ones. It is a product that is internally plasticized in order to
retain its mechanical properties and its adhesion, even after years of exposure to the sun and the rain. It also contains heat reflective
pigments and additives that provide an excellent, highly protective barrier which reflects the sun’s heat and destructive UV rays. In turn,
this helps to cool surfaces and leads to a reduction of interior home and building temperature, energy savings and cooling costs.
Masterflex® Reflective leaves a brilliant ultra white finish, reducing surface heat absorption up 20°F.
Masterflex® Reflective is used for waterproofing and protection of concrete, wood, roof tiles, galvanized metal (exposed for some time),
asphalt and built up roofs, whit the additional advantage of lowering interior home and building temperature
 Cool Roof Technology provides maximum sun
light reflection resulting in lower room
temperature and energy saving
 Highly reflective finish
 Superfast dry early rain resistance technology
 Maximum UV rays & dirt pick up resistance
 Masterflex Polyfiber Plus® the thickest
technology that guarantees the maximum adhesion
on concrete roofs, wood, asphalt and metal
 Highest water ponding resistance
Brilliant Ultra White finished
Reflective flat finish
SECTION 6 - COMPOSITION
100% elastomeric acrylic resins, titanium dioxide and reflective and inert pigments. Free of lead and, chromates and mercury.
SECTION 7 – PHYSICAL AND CHEMICAL PROPERTIES
Viscosity: 105 – 115KU (Stormer) Flash Point: None
Weight per gallon: (10.60 +/- 0.15) Lbs Solids per Volume: (55+/-1) %
Solids per weight: 65% VOC Content max (grams/liter): 43
 Sealer film is Mold & Mildew Resistant
 Maximum adhesion on concrete roofs, wood, asphalt and
metal
 Higher water pounding resistance without membrane
deterioration eliminating all types of filtration
 100% Acrylic Elastomeric
 2 in 1 Primer and Sealer
 Fiber Reinforced for More Protection, Strength & Durability
 Low VOC
 Complies with ASTM D6083