27213 Keypad and 27211 Weather Cover Kit Guide Rev A 27213 Package Contents Qty 1 Qty 1 Qty 4 #10-32 x ½ Flat Head Screws Keypad Gasket 27213 Master Lock Bluetooth Keypad Qty 2 Qty 4 #10-32 x ½ Hex Screw SS Grommets Qty 1 Qty 4 Qty 1 #10-24 Nutserts 27211 Weather Cover Gasket Qty 4 27211 Weather Cover (Optional Accessory) Qty 4 #10-24 X ½ Long Button Head Screws 10-32 x ½ Flat Head Screws Master Lock Company LLC, Milwaukee, WI 53154 U.S.A.
Specifications Mechanical Shipping Weight Dimensions Electrical Power Consumption Cable Requirements Environmental Operating Temperature Humidity Regulatory FCC Class: 2 lbs 3 1/2” W x 4 7/8”H x 1”D 60 mA @ 3 VDC typical 350 mA peak 4 twisted pair-wire, 22 AWG Min., 50ft max NEBS -40oF to 158oF Up to 95% RH 47 CFR, Part 15, Sub Part C Tested to select subsections of GR-487 Keypad Dimensions (Inches) 1.00 3.25 1.00 1.00 4.87 3.25 4.87 4.87 1.00 3.
Keypad Mounting Hole Pattern Dimensions (Inches) 2.75 .297” ø 19/64” 4 Places 2.25 4.00 5/8” ø 1.375 Master Lock Company LLC, Milwaukee, WI 53154 U.S.A. | 800-574-7260 ©2017 Master Lock Company LLC | All Rights Reserved.
Weather Cover Dimensions (Inches) 5.11 7.44 Master Lock Company LLC, Milwaukee, WI 53154 U.S.A. | 800-574-7260 ©2017 Master Lock Company LLC | All Rights Reserved.
1.86 7/32” (.218) ø 4 Places 14.88 1.00 ø 5.25 2.625 1.75 3.50 Tools & Materials Safety Glasses Hearing Protection Gloves or Similar Hand Protection Tape Measure (1/16” graduations) Pencil ESD Approved Vacuum Automatic Center Punch 7/32” (.218”) Drill Bit 19/64” (.297”) Drill Bit Cordless Drill (1/2”) Step Drill Bit Nutsert Install Tool and Bits #10-24 Tap #10 Flat head Screw Driver #10 Hex Driver The Tools list and provided hardware is suitable for use with installations on metal surfaces.
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Warning: Any modification without the express written consent of The Master Lock Company LLC could void your authority to operate this product and invalidate the product warranty.
3. Feed the keypad cable through the center hole in the mounting surface 4. Align the Keypad with the mounting surface so that the studs pass through the (4) mounting holes. 5. Thread the washers and lock nuts (not provided) onto the studs and tighten. 6. Trim the studs if necessary Skip to Connecting the Keypad Steps on Page 6 Installing the Keypad with a Weather Cover 1. Prepare Mount Identify the desired vertical height for your installation.
3. Assemble 1. Place the Keypad Gasket followed by the Bluetooth Keypad 27213 into the Weather Cover, aligning the center hole and mounting holes. Pass the keypad wire pigtail through the center holes. Weather Cover Keypad Gasket Bluetooth Keypad 2. To attach the Keypad to the weather cover, insert the (4) #10-32 x ½ flathead screws into the mounting holes in the Weather Cover exterior as shown. 3.
4. Install 1. Pass the Keypad wires through the center hole in the prepared mounting surface. 2. Attach the assembled Bluetooth Keypad 27213 and Weather Cover 27211 using (4) #10-24 x 1/2” Long Button Head Screws. Activating the Keypad 5.
6. Configure Note: For the Keypad to function, the Door Controller must be powered and setup in ACS. Consult the Door Controller Installation and User Manual for instructions. 1. With the Master Lock Vault Enterprise App open on your mobile device, wake the Keypad by touching the face of the keypad. The Keypad will light and the LED will illuminate blue. 2. The Controller name will appear as a selectable option in the app. Select the controller 3. Use the App to unlock the door.
Use Wake the Keypad Touch any area of the keypad number plate until backlight and LED Illuminates. Note: The Mobile App will not detect the Keypad unless it is awake Enter a TAC • • • Wake the Keypad.
Main Power Blue, solid Battery Power Blue, slow blinks Entry Error Red, solid Entry Timeout Red, fade Denied Red, solid Rapid tones Success Green, rapid blink Long tone Penalty Delay Red, solid Rapid tones Audit Trail Upload Blue, fast blink with pause for duration Firmware Download Blue, fast blink with pause for duration *Blink function depends on mode. See Backlight Behavior for details Backlight Performance A DayNight setting is available in ACS to manage backlight behavior.
