Operator’s Manual 12 VOLT Lithium-Ion LED Worklight Model No. 241-0316 IMPORTANT : WARNING! To reduce the risk of injury, user must read instruction manual. Safety symbols in this manual are used to flag possible dangers. The safety symbols and their explanations require your full understanding. The safety warnings do not, by themselves, eliminate any danger, nor are they substitute for proper accident prevention measures. This Safety Alert Symbol indicates caution, warning, or danger.
TABLE OF CONTENTS Safety Symbols ................................................................................................page 2 Safety Instructions ..........................................................................................page 4 Description .......................................................................................................page 9 Assembly ..........................................................................................................page 10 Operation ....
CAUTION: Indicates a potentially hazardous situation, which, if not avoided, could result in minor or moderate injury. CAUTION: (Without Safety Alert Symbol) Indicates a situation that may result in property damage. WARNING: To ensure safety and reliability, all repairs should be performed by a qualified service technician at an Authorized Service Center. WARNING: The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage.
.../min Wet Conditions Alert Read The Operator’s Manual Do not expose to rain or use in damp locations. To reduce the risk of injury, user must read operator’s manual. Always wear safety goggles or safety glasses Eye Protection with side shields, or a full face shield when operating this product. Safety Alert Precautions that involve your safety. No Hands Symbol Failure to keep your hands away from the blade will result in serious personal injury.
c) O nly use attachments recommended or sold by manufacturer. d) Do not use outdoors. e) For a portable appliance – To reduce the risk of electrical shock, do not put Flashlight and Battery Pack in water or other liquid. Do not place or store appliance where or can fall or be pulled into a tub or sink. GENRAL SAFETY RULES WARNING!Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and / or serious injury.
any other battery packs may create a risk of injury and fire. hen battery pack is not in use, keep it away from other metal objects, W like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. nder abusive conditions, liquid may be ejected from the battery; U avoid contact. If contact accidentally occurs, flush with water.
emove the battery pack from the Worklight before performing any R routine maintenance or cleaning. Do not disassemble the Worklight. o not place the Worklight or battery pack near fire or heat. They may D explode. o not operate the Worklight or the charger near flammable liquids or in D a gaseous or explosive environment. Internal sparks may ignite fumes. T o reduce the risk of electric shock, do not put the Worklight, battery or charger in water or other liquid.
se of an attachment not recommended or sold by the battery-charger U manufacturer may result in a risk of fire, electric shock or injury to persons. o not abuse the cord or charger. Never use the cord to carry the charger. D Do not pull the charger cord to disconnect the plug from receptacle. Damage to the cord or charger could occur and create an electric shock hazard. Replace damaged cords immediately.
reduce the risk of electric shock or damage to the charger if metal items should fall into the opening. It will also help prevent damage to the charger during a power surge. isk of electric shock. Do not touch the uninsulated portion of output R connector or uninsulated battery terminal. ave these instructions. Refer to them frequently and use them to instruct S others who may use this tool.
SPECIFICATIONS Run-time Approximately 7 hours Worklight Weight 5OZ Battery Type Lithium-Ion Battery Voltage 12 Volt DC Charger Input 120-Volts, 60 Hz AC only Optimum Charging Temperature 50°F (10° C) -104°F (40°C) ASSEMBLY WARNING! If any part is broken or missing, do not attempt to attach the battery or operate the worklight until the broken or missing part is replaced. Failure to do so could result in possible serious injury.
OPERATION BATTERY PROTECTION The integrated protective circuitry prevents the battery pack from extreme temperature, over discharge, and over-charge. To protect the battery from damage and prolong its life, the battery pack circuitry will turn off the battery pack if the temperature becomes too high during use. NOTE: The battery can automatically reset after it cools down.
5. T he charger will communicate with the battery pack to evaluate the condition of the battery pack. 6. T he green lights will flash while the battery pack is charging. After charging is complete, the green LED on the charger will be on. The flickering red light indicates a defective battery or a bad connection between the battery and the charger. 7. T he battery pack will fully charge if left on the charger, but it will not overcharge. LED FUNCTIONS OF CHARGER (Fig.
charger. If the LED status reads “defective” a second time, try charging a different battery pack. 2. I f a different battery pack charges normally, dispose of the defective battery pack (see Maintenance section). 3. I f a different battery pack also indicates “defective,” the charger may be defective. BATTERY CHARGING If the battery pack is being charged within a normal surrounding temperature range (50°F to 104°F), the green LED will begin flashing and the red LED will be off.
WARNING! when placing the battery pack in the tool, be sure that the raised rib on the battery pack aligns with the groove inside the worklight and that the latches snap into place properly. Improper attachment of the battery pack can cause damage to internal components. TURN ON/OFF THE WORKLIGHT (FIG.5) Fig. 5 Depress the switch to turn on the worklight; depress it again to turn off. ADJUSTING THE WORKLIGHT HEAD (Fig.6) The worklight head independently pivots 90° for maximum flexibility.
MAINTENANCE GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. WARNING! Do not at any time let brake fluid, gasoline, petroleum-based products, penetrating oils, etc. to come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.
BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING To preserve natural resources, please recycle or dispose of batteries properly. This product contains lithium-ion batteries. Local, state, or federal laws may prohibit disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options. WARNING! Upon removal of the battery pack for disposal or recycling, cover the battery pack’s terminals with heavy-duty adhesive tape.