Owner`s manual

ManualsBrandsMaster-force ManualsPower Screwdriver241-0716

OPERATING MANUAL

4V Lithium-Ion Screwdriver Kit

241-0716

IMPORTANT:

Carefully read this Owner’s Manual before using this tool. Pay close atten-

tion to all Safety Instructions, Warnings, and Caution sections. Use this tool

properly, and only for its intended use

Safety symbols in this Manual are used to ﬂag possible dangers. The safe-

ty symbols and their explanations require the operator’s full understanding.

The safety warnings do not, by themselves, eliminate any danger, and they are

not a substitute for proper accident prevention measures.

This Safety Alert Symbol indicates caution, warning, or danger. Failure to

obey a safety warning can result in serious injury to yourself or others. To reduce

the risk of injury, ﬁre, or electric shock, always follow the safety precautions.

Summary of content (12 pages)

PAGE 1
OPERATING MANUAL 4V Lithium-Ion Screwdriver Kit 241-0716 IMPORTANT: Carefully read this Owner’s Manual before using this tool. Pay close attention to all Safety Instructions, Warnings, and Caution sections. Use this tool properly, and only for its intended use. Safety symbols in this Manual are used to flag possible dangers. The safety symbols and their explanations require the operator’s full understanding.
PAGE 2
TABLE OF CONTENTS Specifications……………..……………………………………...…… Page 2 Rules for Safe Operation……………..……………………………...… Page 3 Description……………..……………………………………………... Page 6 Maintenance……………..………………………………………......... Page 9 Accessories ……………..……………………………………….......... Page 9 Warranty……………..……………………………………………........
PAGE 3
RULES FOR SAFE OPERATION KNOW THE TOOL To operate this tool, carefully read this Owner’s Manual and all labels affixed to the tool before using. Keep this Manual available for future reference. IMPORTANT This tool should only be serviced by a qualified service technician. READ ALL INSTRUCTIONS THOROUGHLY GENERAL SAFETY RULES FOR ALL POWER TOOLS WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.
PAGE 4
void accidental starting. Be sure switch is off before plugging in or A attaching the battery. Carrying tools with your finger on the switch or powering tools that have the switch on invites accidents. emove adjusting keys or wrenches before turning the tool on. A wrench R or a key that is left attached to a rotating part of the tool may result in personal injury. o not overreach. Keep proper footing and balance at all times.
PAGE 5
o not alter or misuse tool. These tools are precision built. Any alteration D or modification not specified is misuse and may result in a dangerous condition. Service T ool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. hen servicing a tool, use only identical replacement parts. Follow W instructions in the Maintenance section of this manual.
PAGE 6
SAFETY SYMBOLS FOR YOUR TOOL The label on your tool may include the following symbols. V A Hz W min ~ no .../min Volts Amperes Hertz Watts Minutes Alternating current Direct current No-load speed Class II construction, Double Insulated Revolutions or Strokes per minute Indicates danger, warning or caution. It means attention! Your safety is involved. DESCRIPTION The screwdriver is a light-duty tool for tightening and loosening screws.
PAGE 7
Fig.1 7 5 4 6 8 3 2 1 9 On/Off trigger switch. To turn tool on, press the trigger switch. To turn the tool off, release the trigger switch. Forward/Reverse switch. The forward/reverse switch should only be operated when the motor is NOT running. Screwdriver bit collet. To hold 1/4" bits, bit holder, and socket adaptor should be a separate line. Worklight. For low-light situations. LED Forward/Reverse Indicator. Use “Forward” for driving screws, “Reverse” for removing screws. Work light switch.
PAGE 8
Do not place the power unit in an area of extreme heat or cold. It works best at normal room temperature. The base of the tool or power unit may become warm during charging. WARNING! Only use the original power unit to charge the tool; use of other power units may cause fire, explosions, and serious injury. NOTE: During the charge, the tool can’t be turned on. FITTING SCREWDRIVER BITS Place a 1/4” bit into the magnetic bit holder and then insert the bit holder into the screwdriver collet.
PAGE 9
MAINTENANCE WARNING! It is recommended that all the repair or replacement for this tool shall be performed by a qualified service technician. Contact or visit the nearest Menards store for more information. WARNING! Always use only a soft, dry cloth to clean your screwdriver, never use any detergent or alcohol. Disconnect the power unit from the main supply before cleaning. CAUTION! No chemical agents are approved for use in cleaning this power tool. Clean with a dry cloth or towel only.
PAGE 10
PAGE 11
PAGE 12