USER MANUAL — MW50+ 2-IN-1 WIRELESS ON + OVER-EAR HEADPHONES 1 EN / FR / ES / DE / PT / IT / KR / 中文
USER MANUAL – MW50+ WIRLESS ON + OVER-EAR HEADPHONES EN Master & Dynamic has a deep passion for building beautifully crafted, richly appointed, technically sophisticated audio products for creative minds. Designed for decades of use, Master & Dynamic products are engineered to last, utilizing only the finest materials such as premium leathers and stainless steel, creating the perfect balance of aesthetics, strength, comfort and sound.
TECHNOLOGY MEETS SOPHISTICATION EN Our intuitive controls afford an elegant, tactile experience. Weight distribution, fit and comfort are paramount. Our exposted all-aluminum antenna provides best-in-class (3X industry average) signal range for Bluetooth® connectivity distance. 40mm beryllium drivers provide superior acoustics and deliver our signature rich, warm sound. Rotating hinges fold flat for portability.
A RICH, WARM SOUND EN We created a rich, warm sound signature from our custom 40mm beryllium drivers. An expansive soundscape perfectly captures the exceptional detail that well recorded music has to offer. Our tuning is designed to accommodate a diversity of tastes and musical genres.
DESIGNED FOR DECADES OF USE EN Our headbands are constructed with premium grain cowhide on the exterior surface and lined with soft lambskin. Each set of ear pads are made of memory foam and wrapped in lambskin, providing superior comfort and breathability. Areas subject to heavy wear, such as the ear pads, are built to last and be easily replaced as needed. All high strain areas utilize stainless steel components.
2 OVERVIEW On-Ear (2x) 1 EN 1 Premium Grain Leather Headband with Lambskin Interior 6 Aluminum Headband Connector 2 Two Sets of Interchangeable Memory Foam Ear Pads with Lambskin Covering 8 USB-C Input 3 Forged Aluminum Components 10 Noise Rejecting Microphone Array Over-Ear (2x) 7 Premium Grain Leather Inlay 9 Machined Aluminum Antenna 4 3.
ADJUSTABILITY | FIT | COMFORT EN Adjust earcup post to find optimal fit. Rotates for comfort around neck.
FUNCTIONS (AUDIO + TELEPHONE) vol+ Audio Telephone vol- Multi Function Button (MFB) 14 Factory Reset EN Play/Pause MFB Vol up vol + Vol down vol – Next track vol + (≥2sec)or double press MFB Previous track vol – (≥2sec) Answer call MFB End call MFB Ignore call MFB (≥2sec) Digital assistant / voice dial MFB (≥2sec) PASSIVE AUDIO EN • Plug 3.
TURN ON AND CHARGE • • EN To turn on the MW50+ slide the switch to the middle position. Each time you turn on the headphone the battery status will be displayed. To recall battery status, slide switch to for less than 2 seconds. ON Low Battery Med Battery • 16 The headphone will automatically search for previously connected devices. A solid light indicates you are connected. If no connection is made after 2 minutes, the headphone will enter deep-sleep mode. Cycle power switch to awaken.
PAIRING EN • Hold in position for 2 seconds, light will pulse when headphone is in pairing mode. PAIRING TO 2 DEVICES How to pair with two devices 1 Enter pairing mode 2 Connect to device 1 3 Enter pairing mode again Pairing 4 Device 1 will disconnect • Access Bluetooth settings on your source device.Locate MW50+ and connect. A solid light indicates you are connected. ® EN 7 Turn headphone on.
ACCESSORIES EN CHANGING/REMOVING EAR PADS On-Ear Headphone Plug Canvas Headphone Case Source Plug M&D EN Over-Ear Locator Pin M&D Cable 01: USB-C Leather Cable Box Headphone Plug M&D Cable 02: 1.25m Straight Cable Ear Pad Case 20 Source Plug M&D To remove, grip leather ear pad and gently pull away from ear cup. Magnets will release. To attach, line up holes on back of ear pads with locator pins on ear cups. The magnets will help pull and lock the ear pads into place.
MAINTENANCE AND TROUBLESHOOTING Clean ear pads and headphones with soft, slightly damp cloth. Do not soak, submerge or allow moisture to enter near the drivers or cable jacks. Ear pads and cables can be purchased if they are worn out at: www.masterdynamic.com Do not drop, sit on, or allow the headphones to be exposed to water, moisture, or temperature extremes. 22 MAINTENANCE AND TROUBLESHOOTING It is recommended that you return your headphones to their storage case when not in use.
HEARING HEALTH EN Our ability to hear is amazing. Treat your ears like the precious tools they are, and they will continue to provide you with exceptional data, as well as a lifetime of incredible sonic experiences. In general, do not listen “too loud or for too long,” and be attentive to your own ears. Ringing, discomfort, or sensitivity to high frequencies and treble may be a signal from your ears that you are pushing them to their limits and causing damage.
PREVENTION OF NIHL (NOISE INDUCED HEARING LOSS) EN NIHL is a preventable condition caused by both one-time and extended exposure to excessive decibel (dB) levels. This harm to sensitive inner ear structures is irreversible and people of all ages can be affected. Damage can happen in a single event or gradually over time. One-time exposure to an intense "impulse" sound, such as an explosion, or by continued exposure to loud sounds over 85 decibels can cause harm.
WARRANTY AND CUSTOMER SERVICE EN Master & Dynamic guarantees this product against defects in materials or workmanship for a period of two years from the date of original purchase on our website or from an authorized Master & Dynamic retailer or reseller. As an exception to this warranty period, batteries are guaranteed for proper functioning without performance deterioration, for a period of one year from the date of original purchase.
FCC 2AGA7MW50 Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
MW50-M-20170914 Die Fernbedienung und das Mikrofon werden nur von den Produkten iPhone 3GS oder später, iPad, iPod Touch (2. Generation oder später), iPod Classic (120GB, 160GB) und dem iPod Nano (4. Generation oder später) unterstützt. Die Fernbedienung wird auch vom iPod Shuffle (3. Generation oder später) unterstützt. Audio wird von allen Modellen des iPads oder iPods unterstützt.
