High Definition Media Home Theatre MP-1372RS USER MANUAL
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l Table of Contents 1. 2 3 4. Before you get started ........................................................................................................................................................................................... 3 1.1 Safety Instruction .........................................................................................................................................................................
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 1. Before you get started 1.1 Safety Instruction 1. Always unplug the power cable before inserting Hard Drive. 2. A power supply with a different voltage will damage and make void of this product warranty. 3. Keep this equipment away from humidity or any type of moisture. 4. DO NOT drop or shake the device. 5. DO NOT press or put any weight on the device. 6. DO NOT clean the device with alcohol, thinner or benzene.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 1.2 Specification ■ Hardware Spec. Video Output Exterior Interfaces Audio Output Composite Out X1 HDMI 1.3 Out X1 YPbPr Out X1 Audio Out L/R X1 SPDIF(Optical) X1 File transfer port USB 2.0 Host port 2 Ports (USB 1 / USB 2) Data transfer with PC USB 2.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l ■ Software Spec. Multi-Media Support MPEG-1 MPEG-2 MPEG-4 DivX 3/4/5/6, Xvid Movie Decoding H.
H i g h D e f i n i t i o n M e d i a 1.
H i g h D e f i n i t i o n M e d i a 2 Easy Installation Guide 2.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l HDD Installation Introduce NOTE: Installing 3.5/2.5 -inches HDD is not a necessary step if you only want to playback via USB external hard drive. 3.5 - inches Step 1: Loose the two screws in the rear panel, and then slide out the tray Step 2: Install 3.
H i g h D e f i n i t i o n Step 3: Lock the tow screws. M e d i a P l a y e r U s e r Step 4: Slide the tray back into the aluminum case and lock both screws in rear panel.
H i g h D e f i n i t i o n M e d i a P l a y e r 2.5 – inches Step 1: Loose the two screws in the rear panel, and then slide out the tray Step 2: Lock a screw to connect the A part and HDD.
H i g h D e f i n i t i o n M e d i a Step 3: Install 2.5” SATA HDD to the SATA connector Step 4: Lock a screw to connect the A part and device.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r Step 5: Slide the tray back into the aluminum case and lock both screws in rear panel.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 3 Using Media Player 3.1 Remote Control Introduction 1 18 4 20 3 5 23 2 19 22 27 9 1. POWER 16. EJECT 31. CM SKIP 2. Display 17. TITLE 32. SELECT 3. Audio 18. HOME 33. COPY 4 Number Buttons 19. TV SYSTEM 5. GOTO 20. SUBTITLE 6. Setup 21.MENU 7. Enter/ZOOM 22. VOL + / - 8. Browser 23. MUTE 9. STOP 24.REPLAY 10. PLAY 25. Navigation 11. PREV 26. RETURN 12. SLOW 27. PAUSE 13. Option 28. NEXT 14.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 3.2 Getting Started Please make sure that you’ve installed the AAA batteries into the remote control. 3.2.1 Connect Media Player to your TV Connect either HDMI or Composite from media player to your TV. When connecting the HDMI cable to TV, the device will detect the highest resolution that will possibly work for your TV. When connecting the Composite cable (CVBS) to TV, make sure your TV system is either PAL or NTSC. 3.2.
H i g h 3.2.3 D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l Setup Through main screen menu, you will be able to enter into the Setup page such as Audio, Video, Network, System and MISC. You may press ENTER (Key 7) to access each setting.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 3.2.3.1 Audio This setting is focusing on the outputs of Audio. There are 4 digital outputs, HDMI LPCM, HDMI RAW, SPDIF LPCM and SPDIF RAW. HDMI LPCM (2CH): When player audio output connects to TV via HDMI, the player will decode audio as STEREO. HDMI LPCM Multi CH: When player audio output connects to TV via HDMI, the player will decode audio as STEREO.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 3.2.3.2 Video Aspect Ratio: Choose one that is suitable for your TV system. Pan Scan 4:3, Letter Box 4:3, 16:09. Pan Scan 4:3 : Keep the height of wide screen, and cut off the right/left screen to fit the 4:3 TV system. Letter Box 4:3 : Keep wide screen, and black border will be covered on the top and bottom of screen to fit the 4:3 TV. 16:9 : Choose 16:9 to fit 16:9 TV system.
H i g h D e f i n i t i o n Network M e d i a P l a y e r U s e r M a n u a l Wired LAN Setup: Select to set the network settings between DHCP (AUTO) and DHCP (Manual). If you have a network device such as Router, and it could assign IP by itself. Please select DHCP (Auto). Otherwise, please make sure your IP address, subnet mask and default gateway, then enter them manually. Wireless Setup (Optional): Select to set the wireless network setting.
H i g h D e f i n i t i o n 3.2.3.3 System M e d i a P l a y e r U s e r M a n u a l Menu Language: Select language. There are English, Traditional Chinese, Spanish, French, Germany, Italian, Dutch, Polish, Czech and Simplified Chinese available. Text Encoding: This setting is to display subtitle, file name and folder name in your language. Most of the time, Unicde UTF-8 can support many languages. However if your language is not supported, choose the most suitable one in the menu.
H i g h D e f i n i t i o n 3.2.3.4 MISC M e d i a P l a y e r U s e r M a n u a l Resume Play: Select to turn ON/OFF to resume from video once you STOP the movie. Slide Show Timing: This function is to set the timing of picture showing on TV. There are options of OFF/2 Sec/5 Sec/10 Sec/30 Sec/1 Min/2 Min. Transition Effect: Select effect for slide show. Ken Burns: Default active play mode. Background Music: Play background music during slide show.
H i g h D e f i n i t i o n 3.2.4 M e d i a P l a y e r U s e r M a n u a l Browser & Play You may use this player to play Music, Photo and Movie by plug-in USB Flash Drive, USB External Hard Disk and etc. When enter into the Browser icon you will be able to browse all media files where you stored in 3.5” Hard Disk, USB Flash Drive or USB External Hard Disk. When plug-in USB device into player, wait about a few seconds, the USB LED indicator will be lighted.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 3.2.4.1 Play Movies Select Movie or All tabs to browse movie files. In the browser, use Up/Down (Key 25) to select a file or a folder, and then press Enter (Key 7) to play the file or open the folder. You may press RETURN (Key 26) back to previous page. In the browser, moving the scroll bar to movie file, you will see the preview on the right side window. Press PLAY (Key 10) on remote control to play the movie.
H i g h D e f i n i t i o n M e d i a 2. Time Sync: Adjust the time of subtitle. 3. Color: Adjust the color of subtitle. 4. Size: Adjust the size of subtitle. 5. Off set: Adjust the position of subtitle. Adjust the navigation key in playing mode : Horizontal: Adjust the size of subtitle. Vertical: Adjust the position of subtitle. P l a y e r U s e r M a n u a l Press AUDIO (Key 3) on remote control to switch different audio outputs.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 3.2.4.2 Play Music Select Music or All tabs to browse music files. In the browser, use Up/Down (Key 25) to select a file or a folder, and then press Enter (Key 7) to play the file or open the folder. You may press RETURN (Key 26) back to previous page. In the browser, moving the scroll bar to music file, you will see the music information on the right side window. Press PLAY (Key 10) on remote control to play the music.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 3.2.4.3 Show Photo Select Photo or All tabs to browse photo files. In the browser, use Up/Down (Key 25) to select a file or a folder, and then press Enter (Key 7) to play the file or open the folder. You may press RETURN (Key 26) back to previous page. In the browser, moving the scroll bar to photo file, you will see the photo on the right side preview window. Press PLAY (Key 10) on remote control to play the photo.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 3.2.4.4 Adding contents to PLAYLIST Playlist creates a shortcut to allow quick access to the media files. You can play all selected files together regardless of different folders they are located in.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r 3.2.4.5 Slide Show You may run the slide show to see your photos on TV while listening to selected music. M a n u a l Go to Setup Æ MISC Æ Slide Show Timing and set the timing for slide show. And then, go to Background Music and set the source of music files from Folder or PLAYLIST Go back to Browser and press Right/Left to choose the Music tab Add music files into PLAYLIST.
H i g h D e f i n i t i o n 3.2.4.6 M e d i a P l a y e r U s e r M a n u a l File Copy This function will allow you to copy file(s) between USB, HDD and NET. You even can move file(s) to trash, that means the file will be deleted. You also can press COPY (Key 33) to go to File Copy menu at anytime. Use Up/Down (Key 25) to move the scroll bar and choose the source and destination. Press ENTER (Key 7) to proceed. Press ENTER (Key 7) to go into folders for both Source and Destination.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 4. Transcoding Software After installing Transcode Server, you will be able to run BT download and File Sharing function on media player. 4.1 Install and run under Transcode Server Please find the software of Transcode Server in CD disc, and install your PC. You will see the screen as below: 29 to your PC.
H i g h 4.2 D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l Adding Share Folders on PC Adding share folders to NetShare Dialog will help media player to recognize the folder on intranet quickly; Once you have opened sharing folder and kept Transcode software running on the PC, your PC and the folders will be seen in My_Neighbors under BROWER and FILE COPY of the media player main screen. TIPS: 1.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 4.3. The ways connect to File Sharing folders and BT download management Make sure your Network Connection is connected and IP had been assigned (Either assign from DHCP server or fixed IP) to the media player. Therefore, if you set the IP of media player correctly, you will see the IP address when you click on Service tabÆ Scan. Note: Before you set up File Sharing and BT download management, please install 3.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 4.3.1 Set up the media player Before you access to File Sharing folder or BT download management, you will need to set up the player. Please go to the main menu of player, and then clicks as following: Setup Æ System Æ BT and SAMBA. Move the scroll bar down to BT and SAMBA, and then press OK on remote control. The system will show tow selections(On/Off).
H i g h D e f i n i t i o n 4.3.3.1 Setting M e d i a P l a y e r U s e r M a n u a l You will need to set up the settings before you use P2P download. Please click on BitTorrent Download on the top, and then click on “Setting” tab for BitTorrent Setting. Max Download Rate: Set the maximum download speed. Set to “0” is no limit. Max Upload Rate: Set the maximum upload speed. Set to “0” is no limit. Default setting is 20KB/s.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l Delete the torrent file: When finish, the system will delete the torrent task automatically. Default setting is NO. Max simultaneous download task number: Setting of how many tasks you would like to run at the same time. Default setting is 4 tasks. Maximum is 10 tasks. When finish the setting, please click on the “Save Setting” to save all settings.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 2. Click on “Browse” button to select where you stored the seed file. 3. Click on “Yes” button to confirm the task and back to download main page or click on “No” back to download page. 4.3.3.3 Delete Task 1. Click on “Check box” to select task in which you would like to delete 2.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 4.3.4 Account Management Please enable the “Login Control” under System of media player before you click on Account Management. After the Login Control is set, the system will require you to login. Account name: admin Password: 123 Click on Account Management of Neighbor Web, you will be able to modify your password. Click on Enter to modify new password.
