USER’S MANUAL 2.
Contents: Introduction -------------------------------------------------------------------------- 1 Quick Start Guide ------------------------------------------------------------------ 2 Product Description ---------------------------------------------------------------- 4 System Operation ------------------------------------------------------------------ 7 Color Label Identification --------------------------------------------------------- 12 Trouble Shooting -----------------------------------------------
Introduction Thank you for purchasing our product. This wireless microphone system operates in 2.4GHz frequency with 8 selectable channels. Please read this instruction manual carefully before operating the system. This manual covers the function and operation of the wireless microphone system. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Quick Start Guide AC/DC ADAPTER 1. Connected Receiver Power Cable 2. Connect Mixer or Amplifier AUDIO OUT AUDIO OUT LINE ANT B BALANCED MIC SQ DC 12V 500mA ANT B LINE ANT A BALANCED UNBALANCED RoHS UNBALANCED MIC SQ DC 12V 500mA ANT A RoHS 3.
Quick Start Guide 4. Insert Batteries 12 11 1 10 2 9 3 8 4 7 Power Pair -20 10 0 -20 Pair Power 1.5V AA 5 6 1.5V AA 1.5V AA 1.5V AA 11 12 1 10 2 9 1.5V AA 1.5V AA < 1M Step 1 Press 2 Times Pair Sync -20 10 0 1.5V AA 1.5V AA Press 2 Times OR TA LK TALK Step 2 3 4 7 5.
Receiver Front : 9 1. 2. 3. 4. 5. 6. 7. 8. 9. 1 2 3 4 5 6 7 8 9 Power Button Pair Button: Press the button to activate pair function with transmitter. RF Indicator: The LED lights to indicate that RF signal has been received. LED Display: Display selected channel. AF Indicator: The LED lights to indicate that AF signal has been received. Battery LED: If the Red LED stays flashing, it indicate the batteries on transmitter will out of power soon, and should be changed.
Handheld Microphone 1.5V AA 1.5V AA 4 TALK 5 1 2 3 6 1. Grille: Protects the microphone capsule and helps reduce breath sounds and wind noise. 2. Pair Button: Press the button to activate pair function with receiver. 3. Talk Button: Push the button up to talk. Push the button down for mute. 4. Battery compartment: Insert two AA size batteries into the compartment and make sure that the polarity of batteries is correct. 5.
Bodypack Transmitter 4 2 7 3 1 5 Power -20 Pair -10 0 8 1.5V AA 1.5V AA 6 1. Power Button: Press for 1 second to power transmitter on or press for 3 seconds to 2. Mute Button: With the transmitter on, a slight press for button will toggle between mute 3. Power LED: Indicate the power / low battery level status. power transmitter off. and unmute function. 4. 5. 6. 7. 8. LED Indicator Status Green Ready Flashing Green The synchronization process is actuated.
Connecting the receiver Prior to setting up, please check that the transmitter and receiver are tuned to the same channel. Two or more transmitters operating in the same channel can not be used at the same time and area. 1 AC/DC ADAPTER Connected the provided DC power supply to the receiver power input with an appropriate AC power source. The LED display will light and the receiver is on. 2 Using a standard audio cable with 3-pin XLR connectors or 6.3mm phone plugs to connect the mixer or amplifier.
Channel setting on receiver Notice: Do not put two or more transmitters operating nearby when setting up the channel. Please keep transmitter at least one meter away from receiver. Setting interference-free channel by manual operation. Press “Channel” button for 3 seconds till LED display is flashing. 11 10 9 8 7 12 3 6 1 2 3 4 5 Slight press “Channel” button to change the channel forward.
Set up the handheld microphone / bodypack transmitter Open the battery cover and insert batteries into the battery compartment conforming to the polarity (+)(-) marks. Power Pair -20 -10 0 1.5V AA 1.5V AA Unscrew the handheld Mic and open the battery cover to insert the battery into the battery compartment and confirm the marks of the polarity (+) (-). Connect to the lavalier microphone, headset microphone or guitar cable.
Set up the handheld microphone / bodypack transmitter 11 12 11 1 10 2 8 4 9 1.5V AA 3 1.5V Pair Power AA 7 6 5 -20 10 12 Press for 1 seconds to turn the Handheld/ Bodypack transmitter on. 1 10 0 2 9 3 8 4 7 6 5 If the LED stays flashing , it indicates that the battery will out of power soon and should be changed. 1.5V AA Bodypack Handheld 1.5V AA Power Power Pair -20 1.5V AA 1.5V AA 10 Sync -20 -10 Adjust the audio input level.
Pairing a transmitter with a receiver Automatic frequency synchronization via remote channel for easy setup. First, switch the transmitter and the receiver on. Press the Pair button on the front panel of receiver. The Pair LED flashes on the receiver. Then, press 2 times on the Pair button of the transmitter to set the selected channel automatically. When using Pair button setting, the distance of receiver and transmitter is within 1 M. < 1M Step 1 Press 2 Times Pair Power Pair -20 10 0 1.5V AA 1.
Color Label Identification TA LK You can also stick the color label on the receiver and transmitter for quickly identify the pair system.
Trouble Shooting whether is set too high or too low. Safety Do not spill liquid on the appliance and do not drop it on a hard concrete floor. Do not place the equipment near heat sources such as radiators, heating ducts, amplifier, etc. Do not expose the equipment to direct sunlight, extremely dust, excessive moisture, rain, mechanical vibrations, or shock. Take out the battery from transmitter, if the appliance has been not used for a longer period.
System Performance Receiver Frequency Range : ISM 2,400MHz ~ 2,483MHz Case : Half 19” EIA Rack Case Modulation : FSK digital modulation Receiving Mode : True Diversity S/N Ratio : >100dB(A) Audio Frequency Response : 20Hz to 20kHz Audio Sampling : 24bit / 48kHz T.H.D. : < 0.1%(at 1kHz) Dynamic Range : >100dB Latency : < 5.5ms Audio Output : Balanced XLR & Unbalanced 1/4” (6.