user’s manual The Great American Speaker Company
WARNING! • Refer servicing to a qualified technician. • To prevent fire or shock hazard, do not expose this module to moisture. • Turn amplifier off should any abnormal conditions occur. • Do not drive speaker beyond its rated power. The lightning bolt flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of potentially “dangerous voltage” within the product’s enclosure that may be sufficient to constitute a risk of electric shock.
x4 x2 3
Connection WARNING! Turn your amplifier off before making or breaking any signal connections! Fig. 1 These speakers are designed with easy-to-use push-style binding posts that accept bare wire or pins (fig. 2). Additionally, by removing the rubber inserts, they will accept banana plugs (fig. 3) Assign the same color to the (+) and (–) terminals on both the speaker and the amplifier. Make certain that all connections are tight. Fig. 2 Fig.
INSTALLING ON A WALL Note: This speaker is mountable in either a horizontal or vertical orientation. Horizontal mounting requires the use of two shoulder bolts and two wall brackets. Vertical mounting requires the use of only one shoulder bolt and mounting bracket. Note: These instructions assume the mounting surface is standard wood frame and sheet rock construction. If you wish to mount to another type of surface, consult a bonded contractor. Fig. 5A Fig.
2 Affix the wall pads to the back of the speaker at the lower contact points (fig. 6). Fig. 7 3 Locate mounting location using a level and the installation template. Note: HORIZONTAL installation requires the use of TWO wall brackets. Note: VERTICAL installation requires the use of ONE wall bracket. 4 Mark the pilot hole locations. 5 Drill the pilot holes using a 1/8-inch drill bit.
Frequently Asked Questions How do I clean my speakers? Use a dust free cloth (such as a micro fiber cloth) or a soft brush to remove dust from your speakers. Do not spray any kind of cleaning agent on or in close proximity to the drivers. Is there likely to be any interaction between my speakers and the television in my A/V system? Yes. These speakers are not shielded and should be kept at least 2 feet away from a CRT television.
General Information WARRANTY INFORMATION Your speakers are provided with an automatic Limited 90 Day Warranty coverage. You have the option, at no additional charge, to receive a Limited 5 Year Warranty coverage. To obtain the Limited 5 Year Warranty coverage you need to complete and return the Certificate of Registration to MartinLogan within 30 days of purchase. For your convenience MartinLogan also offers online warranty registration at www.martinlogan.com.
Specifications* MARTINLOGAN MOTION 6 MARTINLOGAN MOTION 8 Frequency Response . . . . . . . 120–25,000 Hz ± 3 dB 70–25,000 Hz ± 3 dB Dispersion . . . . . . . . . . . . . . . 80° x 80° 80° x 80° Sensitivity . . . . . . . . . . . . . . . 89 dB @ 2.83 volts/ meter 89 dB @ 2.83 volts/ meter Impedance . . . . . . . . . . . . . . 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers. 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers.
Dimensional Drawings MARTINLOGAN MOTION 6 10
Dimensional Drawings MARTINLOGAN MOTION 8 11
® The Great American Speaker Company Lawrence, Kansas, USA P/N: 9500054 tel 785.749.0133 fax 785.749.5320 ©2010 MartinLogan Ltd. All rights reserved. www.martinlogan.com Rev.
guide de l’utilisateur Le Grand Fabricant D’Enceintes Américain
AVERTISSEMENT! • Pour les réparations, faites appel à un technicien compétent. • Pour éviter les risques d’incendie ou de décharge électrique, n’exposez pas ce module aux vapeurs d’eau ni à l’humidité. • Veuillez éteindre l’amplificateur en cas de conditions anormales. • Ne poussez pas l’enceinte au-delà de sa puissance nominale.
x4 x2 15
Raccordement AVERTISSEMENT! Éteignez l’amplificateur avant de faire des raccordements ou d’interrompre tout raccordement de signal! Fig. 1 Ces enceintes sont dotées de bornes de raccordement facile à utiliser de style bouton-poussoir qui acceptent les fils nus ou les broches (fig. 2). De plus, en enlevant les garnitures en caoutchouc, elles acceptent les fiches bananes (fig. 3) Attribuez la même couleur aux bornes (+) et (-) sur l’enceinte et l’amplificateur.
INSTALLATION SUR UN MUR Remarque : cette enceinte peut être montée en position horizontale ou verticale. Le montage horizontal nécessite l’utilisation de deux boulons d’épaulement et de deux supports muraux. Le montage vertical nécessite un boulon d’épaulement et un support mural. Remarque : ces instructions supposent que la surface de montage est un cadre en bois standard et une construction en gyproc. Si vous souhaitez utiliser une autre surface de montage, consultez un entrepreneur cautionné. Fig.
nécessite l’utilisation de DEUX boulons d’épaulement (fig. 5A). Fig. 7 Remarque : l’installation HORIZONTALE nécessite l’utilisation d’UN boulon d’épaulement (fig. 5B). . 2 Fixez les coussinets de protection pour le mur derrière l’enceinte sur les points de contact les plus bas (fig. 6). 3 Déterminez l’emplacement de montage à l’aide d’un niveau et du gabarit d’installation. Remarque : l’installation HORIZONTALE nécessite l’utilisation de DEUX supports muraux.
Foire Aux Questions Comment nettoyer les enceintes? Utilisez un linge exempt de poussière (comme un linge en microfibres) ou une brosse à poils doux pour enlever la poussière sur les enceintes. Ne vaporisez pas de produits nettoyants sur les haut-parleurs ou à proximité de ceux-ci. Peut-il y avoir une interaction entre mes enceintes et la télévision dans mon système A/V? Oui.
Renseignements Généraux RENSEIGNEMENTS SUR LA GARANTIE Vos enceintes sont vendues avec une garantie limitée automatique de 90 jours. Vous avez la possibilité d’obtenir, sans frais supplémentaires, une garantie limitée de cinq ans. Pour obtenir la garantie limitée de cinq ans, vous devez remplir et retourner le certificat d’enregistrement à MartinLogan dans les 30 jours qui suivent la date d’achat. Pour plus de commodité, MartinLogan permet également l’enregistrement en ligne à la garantie à l’adresse www.
Spécifications* MARTINLOGAN MOTION 6 MARTINLOGAN MOTION 8 Réponse de Fréquence . . . . . . 120–25 000 Hz ± 3 dB 70–25 000 Hz ± 3 dB Dispersion . . . . . . . . . . . . . . . 80° x 80° 80° x 80° Sensibilité . . . . . . . . . . . . . . . 89 dB à 2,83 volts/mètre 89 dB à 2,83 volts/mètre Impédance . . . . . . . . . . . . . . 4 Ohms. Compatible avec des amplificateurs classés 4, 6 ou 8 Ohms. 4 Ohms.
Plans Dimensionnels MARTINLOGAN MOTION 6 22
Plans Dimensionnels MARTINLOGAN MOTION 8 23
® Le Grand Fabricant D’Enceintes Américain Lawrence, Kansas, USA P/N: 9500054 tél. 785.749.0133 téléc. 785.749.5320 ©2010 MartinLogan Ltd. Tous droits réservés. www.martinlogan.com Rev.