User Manual

Lawrence, Kansas, USA www.martinlogan.com

In-CeIlIng/In-Wall Speaker

Pre-Construction Brackets

• Conveniently position your in-wall or in-ceiling speakers during construction.

• Easy cut-out when drywall is installed.

Installation:

1. Position the plastic bracket so that the flange is facing you.

2. Snap the wings into the slots from behind.

3. Place the bracket on the joists or studs (plastic flange faces out).

4. Using suitable drywall screws, nails or staples, mount the wing

supports to the joists or studs.

5. If there is any excess metal from the wing supports, wrap and secure

to a stud or joist or break it off.

6. Speaker wire can be looped through any hole of the perimeter of the

bracket until installation.

Caution: Edges of wing supports may be sharp.

PAGE 1
In-Ceiling/In-Wall Speaker Pre-Construction Brackets • Conveniently position your in-wall or in-ceiling speakers during construction. • Easy cut-out when drywall is installed. Installation: Caution: Edges of wing supports may be sharp. 3. Place the bracket on the joists or studs (plastic flange faces out). 4. Using suitable drywall screws, nails or staples, mount the wing supports to the joists or studs. 1. Position the plastic bracket so that the flange is facing you. 5.
PAGE 2
Encastrables de Plafond/Mur Enceintes Support de Pré-Construction • Placez vos enceintes dans le mur ou le plafond à un endroit pratique pendant la construction. • Le découpage est facile lorsque la cloison sèche est installée. Installation: Mise en garde : Les rebords des supports ailés peuvent être coupants. 1. Placez le support en plastique de façon à ce que la collerette soient face à vous. 3. Placez le support sur les solives ou les montants (la collerette en plastique face à l’extérieur). 4.