Product Manual

Tools Needed:

•

❶

●

❷

2-1:

Insert Pin or Pick at the locations illustrated below. This is a marked area, or dimple

on the face of the wheel this is called the “access port”. The access port has a thin

membrane of plastic that you will need to penetrate with a digging motion with the

pick/pin. You may choose to do this with an electric drill - however be careful only

to breach the plastic and not the metal spring that lies beneath the

membrane/dimple.

For 6" - 8" Wheels

For 10" - 12" Wheels

How to Apply a Roll-Tech Snap-Lock Wheel

Before removing the old wheel from the

trash can, measure the distance from the

edge of the wheel hub to the edge of the

can.

If there is any space between the edge

of the wheel hub and the edge of the

can, you will need to use spacers.

Remove the old wheel from the garbage can.

Penetrate access port

A pick , awl or pin

Electric drill with 1/8” bit(optional)

PAGE 1
How to Apply a Roll-Tech Snap-Lock Wheel Tools Needed: • A pick , awl or pin • Electric drill with 1/8” bit(optional) ❶ Before removing the old wheel from the trash can, measure the distance from the edge of the wheel hub to the edge of the can. ● If there is any space between the edge of the wheel hub and the edge of the can, you will need to use spacers. ❷ Remove the old wheel from the garbage can. 2-1: Penetrate access port Insert Pin or Pick at the locations illustrated below.
PAGE 2
-2: Apply leverage With the pick, apply leverage to the bottom side of the locking pin’s flange. It may be helpful to use a pick/pin with a slightly curved or bent tip. For 6" - 8" Wheels For 10" - 12" Wheels 2-3: Pull wheel from axel While maintaining leverage with pick/pin, use the other hand on the inside of the wheel to slide the wheel away from the can. If the pin is disengaged from the axle you should have no difficulty in removing the wheel.
PAGE 3
❺ Pull on the wheel to ensure it is securely locked into place. ❻ Take out the trash! Roll-Tech’s Snap-Lock product line is intended primarily for residential roll-out waste containers and can also be used on other types of wheeled equipment. Features & Benefits Quiet-rolling solid rubber tire on a durable impact-resistant poly hub (center). · · Hub's built-in spring-loaded pin engages with groove in axle to keep wheels firmly attached.