MR10A7 RFID Reader Quick Start Guide
FCC WARNING STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
WARNING AND CAUTION 1. Take any metals into contact with the terminals in connectors. 2. Use the scanner where any inflammable gases. If following condition occur, immediately power off the host computer, disconnect the interface cable, and contact your nearest dealer. 1. Smoke, abnormal odors or noises come from the scanner. 2. Drop the scanner so as to affect the operation or damage its housing. Do not do behavior below. 1.
NTRODUCTION MR10A7 features the first smallest pocket RFID reader being one of perfect accessories for new tablet AIDC systems. It is a stand-alone portable RFID reader which can easily transfer tag data to a host server via advanced Bluetooth transmission or USB wired transaction. For heavy users at tough working conditions, MT10A7 provide industrial protection to against dust and water.
FEATURES The Smallest Pocket RFID Reader Considering comfortable holding, MR10A7 minimizes the size down to W35×L95×H18 mm and eventually makes it easy to carry. It bears to stand as the world smallest RFID Reader. Easy To Use There are only two buttons for complex operations; one is trigger for reading tags and the other is a particular design to customized functions setting by Marson’s unique Utility.
OUT OF THE BOX MR10A7 RFID Reader Quick Start Guide USB Charging Cable Neck Strap Page 5
SPECIFICATIONS RFID Specifications Communications Electrical Physical Environmental Frequency 13.56 MHz Standard Support ISO-15693 & ISO-14443 Reading Distance ISO-15693 0 ~ 5 cm / ISO-14443 0 ~ 2.5cm Bluetooth Version 2.1 Class 2 V2.0, support SPP & HID Wireless Range 10 m Operating Frequency 2.4 GHz – 2.48 GHz USB Virtual COM Port or HID Battery Rechargeable 3.
GETTING CONNECTED 1. Go to Settings 2. Turn on and enter Bluetooth settings.
GETTING CONNECTED 3. Search for “RFID Reader” 4. Tap on “RFID Reader” to connect.
GETTING CONNECTED . Until “RFID Reader” is connected. 6. Go to Notes and you will be able to read.
For more information, please visit our website at www.marsontech.
Marson Technology 9F, No. 108-3, Mincyuan Rd., Sindian Dist.
