OWNER’S MANUAL
WARNING! IMPORTANT SAFETY INSTRUCTIONS prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth.
MARSHALL AMPLIFIER HISTORY AMPLIFIER HISTORY (CONT.) MST modelling recreates the tonal and sonic characteristics of some of the most successful and respected amplifier preamps from the past fifty plus years. JVM410H™ When the JVM410H launched in 2006 it caused quite a stir. This 100 Watt head is an allvalve tonal monster that has four channels, each with three modes: Green, Orange and Red, offering guitarists a range of 12 unique tones.
FRONT PANEL FUNCTIONS 2 1 15 16 3 17 4 18 5 19 20 6 21 7 1. USB Connect via USB to use CODE as a DAW interface, to play tracks from your music library, to get firmware updates and control via MIDI.. To record with CODE using your DAW: To get CODE firmware updates: • Connect to your computer via USB. http://my.marshall.com/Downloads • Select your CODE amplifier as the input source on your computer and within your DAW.
FRONT PANEL FUNCTIONS (CONT.) 8. MASTER Controls the overall volume level of your CODE amplifier. ! MASTER Volume control settings are not stored as part of a Preset. 9. PRESET A Preset is a combination of preamp, power amp & speaker models, with tonal settings and FX: Chorus, Flanger, Tremolo, Delay etc, stored to a single location within your CODE amplifier’s memory.
FRONT PANEL FUNCTIONS (CONT.) FRONT PANEL FUNCTIONS (CONT.) 15. PRE FX (CONT.) 16. AMP AMP is short for preamp. MST modelling faithfully recreates classic and modern Marshall valve tones as well as other famous valve amp tones. Each AMP model creates an authentic preamp setting. The MST preamp models are classified into three groups: Clean, Crunch & Overdrive. ‘STOMPBOX’ FX A:>>|<< A:>>|<< Auto Wah Auto Wah is a dynamic filter, similar to a Wah Wah pedal.
FRONT PANEL FUNCTIONS (CONT.) FRONT PANEL FUNCTIONS (CONT.) 17. MOD MOD is short for Modulation. Modulation FX in a conventional setup can be in stompbox or rack form and often connect via an amplifier’s FX loop: 17. MOD (CONT.) MODULATION FX MODULATION FX A:>>|<< A:>>|<< Chorus Chorus and Vibrato FX apply a subtle pitch variation to the guitar signal taking your sound from shimmering, delicate undulations to full on wobble. This can add depth and width to clean sounds and fatten up solos.
FRONT PANEL FUNCTIONS (CONT.) FRONT PANEL FUNCTIONS (CONT.) 18. DEL (CONT.) 18. DEL (CONT.) DELAY TYPES DELAY TYPES A:>>|<< Vintage Vintage Delay recreates the sound of analogue delays. Vintage Delay’s editable parameters are: PARAMETER VALUE RANGE DESCRIPTION Time 0 - 4000 Controls the Delay repeat time in milliseconds. Feedback 0 - 10 Adjusts the number of Delay repeats.
FRONT PANEL FUNCTIONS (CONT.) FRONT PANEL FUNCTIONS (CONT.) 19. REV (CONT.) 19. REV (CONT.) REVERB TYPES REVERB TYPES A:>>|<< Hall Hall Reverb recreates the longer acoustic reflections of a hall-sized space. Hall Reverb’s editable parameters are: A:>>|<< Stadium Stadium Reverb recreates the acoustic reflections of a very large space.
FRONT PANEL FUNCTIONS (CONT.) FRONT PANEL FUNCTIONS (CONT.) 20. POWER (CONT.) 21. CAB CAB is short for Speaker Cabinet. A cab’s speaker configuration and its size play a significant role in the overall sound produced by the whole amplifier setup. POWER AMP MODELS A:>>|<< The MST modelled speaker cabinets in your CODE amplifier are faithful recreations of classic Marshall cabs: Vintage Marshall 30W Class A/B 30 Watt with 5881 valves.
EDITING A PRESET STORING A PRESET (CONT.) To edit PRE FX, AMP, MOD, DEL, REV, POWER and CAB section settings: To rename the edited Preset and store to the current location: • Hold down the Section Switch that you wish to edit (#15 - #21 in this manual). • The display screen will then show the current section’s settings. highlighted parameter. • Repeat for all parameters and parameter values of the Sections that you wish to edit.
GUITAR TUNER DECLARATION OF CONFORMITY Pressing the PRE FX and AMP Section Switches (#15 & #16 in this manual) together accesses the guitar TUNER: A:>>|<< A:>>|<< • Pluck a string and the note you are playing will display. • Tune the string until the name of the note you wish to tune to appears on the screen.
MARSHALLAMPS.COM Marshall Amplification plc, Denbigh Road, Bletchley, Milton Keynes, MK1 1DQ, England. Telephone: +44 (0) 1908 375411 | Fax: +44 (0) 1908 376118 Registered in England. Registered Number: 805676 Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement and development, Marshall Amplification plc reserves the right to alter specifications without prior notice.