KILBURN II - PORTABLE STEREO LOUDSPEAKER USER MANUAL
LEGAL & TRADEMARK NOTICE • • • • • • Design of device and packaging are intellectual properties of Zound Industries International AB and Marshall Amplification Plc. © All Rights Reserved. Zound Industries International AB is hereinafter referred to as “Zound Industries” or “manufacturer”. MARSHALL, Marshall Amps, their respective logos, “Marshall” and “Marshall” trade dress are trademarks and intellectual property of Marshall Amplification Plc and may not be used without permission.
INDEX ENGLISH SECTIONS PAGE 002. LEGAL & TRADEMARK NOTICE 002. DISCLAIMER 004. BOX CONTENTS 005. GENERAL DESCRIPTION 007. CHARGING THE INTERNAL BATTERY 008. TURNING THE KILBURN II ON/OFF 009. MANY WAYS TO CONNECT 010. CONNECTING VIA BLUETOOTH (PAIRING) 011. CONNECTING VIA AUX INPUT 012. BATTERY LEVEL INDICATOR 013. ADJUSTING THE VOLUME/BASS/TREBLE 014. STANDBY MODE 015. TECHNICAL INFORMATION 016. TROUBLESHOOTING 003.
BOX CONTENTS 001. 002. 003. 004. Marshall Kilburn II portable stereo loudspeaker Quick start guide Important safety instructions Power cord 001. 002. 003. 004. 004.
GENERAL DESCRIPTION 001. 002. 003. 004. 005. Bluetooth button Power/volume knob Bass knob Treble knob Battery level indicator 002. 001. 003. 004. 005. 005.
GENERAL DESCRIPTION CONTINUED 006. 007. 008. 009. 010. 011. 012. Detachable carry strap Rear driver Bass port Backplate Aux input for 3.5 mm plug Power jack Power cord 006. 007. 008. 009. 010. Note: date code and serial number sticker located here. 011. 011. 012. 006.
CHARGING THE INTERNAL BATTERY Important: Always ensure that the power cable, plug and speaker are compatible with your mains supply and wall socket. The Kilburn II is equipped with an internal battery with a playing time for more than 20 hours at mid volume. Charging the battery from empty to full charge takes approximatly 2.5 hours. 001. Gently pull open the silicone weather seal on the back of the speaker. 002. Connect the power cord into the power jack on the speaker. 003.
TURNING THE KILBURN II ON/OFF The volume knob doubles as an on/off knob. 001. Turn the volume knob clockwise to the desired volume and the speaker turns on. 002. The battery level indicator shows the battery charge. 003. Turn the volume knob fully counter-clockwise until you hear a click to turn off the speaker. 004. All indicators turns off. 001. 002. 003. 008.
MANY WAYS TO CONNECT There are many ways to connect to your Kilburn II. The connection can be wireless via Bluetooth or by using a cable with a 3.5 mm stereo plug. Caution: Make sure that the volume is set to low on both the speaker and the music player before using the speaker. 009.
CONNECTING VIA Bluetooth (PAIRING) 001. Push and hold the Bluetooth button for 2 seconds. The Bluetooth indicator starts to blink. 002. Enable Bluetooth on your device (smartphone, tablet, computer). 003. Select Kilburn II from the Bluetooth list and accept pairing. The Bluetooth indicator on the the speaker stops blinking and remains lit when the units are connected. 004. Press play on your audio device. Kilburn II can be connected to two Bluetooth devices at the same time.
CONNECTING VIA AUX INPUT 001. Connect a 3.5 mm stereo plug to the input labelled AUX on the back of speaker. 002. Connect the other end of the cord to the audio output on your audio device. 003. Press play on your audio device. 001. 002. Note: Audio cables are not included in the Kilburn II. 011.
BATTERY LEVEL INDICATOR The battery level indicator shows the battery charge of the Kilburn II. The indicator is dimmed during normal operation to save battery power. Turning any knob will make the indicator light up. When charging the battery, the indicator displays the battery charge with a rising animation. 001. 012. 002.
ADJUSTING THE VOLUME/BASS/TREBLE The Kilburn II has three knobs for adjusting the audio. 001. Volume knob 002. Bass knob 003. Treble knob 001. 002. 003. 001. 002. 003. Note: The volume knob is also the on/off switch. 013.
STANDBY MODE If the Kilburn II is left unused for 10 minutes the speaker saves battery charge by going into standby. In this mode all indicators are off and the speaker does not respond to Bluetooth connection. 001. Push the Bluetooth button to wake the speaker from standby mode. 001. Note: The internal battery can be charged while in standby mode. 014.
TECHNICAL INFORMATION Acoustic specification • Portable stereo loudspeaker with bass reflex system • Digital class D amplifiers: 2 X 8 W + 1 X 20 W • Tweeters: 2 X 20 mm dome tweeters • Woofer: 1 X 4" woofer • Bass and treble tone controls • Frequency response: 52–20,000 Hz ±6 dB • Maximum sound pressure level: 100.4 dB SPL @ 1 m Connectivity: • Bluetooth ®: Bluetooth 5.0 with Qualcomm aptX™ • AUX: 3.
TROUBLESHOOTING PROBLEM CAUSE ACTION The Kilburn II does not turn on. The battery is discharged. Connect the power cord to the Kilburn II and a working wall socket. There is no audio The wrong audio source is selected. Ensure that the device is connected to the Kilburn II. Check that there is no other device connected that is playing. Volume is set too low on either the audio source or the speaker. Slightly increase the volume on your audio source or the speaker.
TROUBLESHOOTING PROBLEM CAUSE ACTION The speaker is not responding A software problem has occurred. Unplug the speaker mains plug from the wall socket, wait for 15 seconds, then plug it in again. Bluetooth connection drops out The two Bluetooth devices are too far apart or the connection is affected due to obstacles. Move the devices closer so that they are within 10 metres, and unobstructed by obstacles such as walls or doors. There is a strong electric field surrounding the Kilburn II.
TROUBLESHOOTING PROBLEM The audio is distorted Erratic performance CAUSE ACTION Volume is set too high on the audio source. Turn down the playback volume on the audio source. The audio stream or audio file is of poor quality. Try another audio file or music player. Volume is set too high on the Kilburn II. Lower the volume on the speaker. Too much bass/treble on the speaker. Lower the bass/treble on the speaker. Interference from another electronic device. Move the Kilburn II to another spot.
WWW.MARSHALLHEADPHONES.COM 019.