DSL1CR & DSL1HR OWNER’S MANUAL
INTRODUCTION Congratulations on your purchase of this Dual Super Lead (DSL) amplifier from Marshall Amplification. The DSL provides the legendary Marshall tone, allowing you to express your distinct playing style and attitude. From clean to distorted overdrives, the DSL 1 is a versatile all valve amp that allows you to easily dial in the sound you desire.
WARNING! IMPORTANT SAFETY INSTRUCTIONS COMPLIANCE STATEMENT WARNING: Before going any further, make sure that your amplifier is compatible with your mains electricity supply. If you have any doubt, please seek help from a qualified technician – your Marshall dealer can help you with this. This device complies with part 15 of the FCC Rules.
FRONT PANEL FUNCTIONS DSL1CR FRONT PANEL 1 2 3 4 5 6 7 8 9 10 11 DSL1HR FRONT PANEL 11 10 9 1. INPUT Input jack socket for your guitar cable. Use a good quality screened/shielded guitar cable to help prevent noise interference. 8 7 6 5 The ULTRA GAIN channel status light will illuminate red to indicate the ULTRA GAIN channel is selected. Note: Channels can be selected using the supplied footswitch. CLASSIC GAIN CHANNEL ULTRA GAIN CHANNEL 2.
REAR PANEL FUNCTIONS DSL1CR REAR PANEL 12 13 14 15 16 17 18 19 DSL1HR REAR PANEL 19 18 17 16 15 14 12. MAINS INPUT Connects the amplifier to the mains electricity supply. 14. FX LOOP SEND Connect the input of an external FX pedal or processor. Note: The MAINS INPUT socket has an integrated fuse compartment. Ensure that the value of a replacement fuse matches the labelling on the amplifier rear panel.
MARSHALLAMPS.COM Marshall Amplification plc, Denbigh Road, Bletchley, Milton Keynes, MK1 1DQ, England. Telephone: +44 (0) 1908 375411 | Fax: +44 (0) 1908 376118 Registered in England. Registered Number: 805676 Whilst the information contained herein is correct at the time of publication, due to its policy of constant improvement and development, Marshall Amplification plc reserves the right to alter specifications without prior notice.