62713 08 DodgeChallenger.qxd:62713cov 12/20/07 2:42 PM Page 1 2008 Challenger SRT8 2008 OWNER’ S MANUAL 81-226-0821 First Edition Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
TABLE OF CONTENTS SECTION PAGE .............................................................3 1 1 INTRODUCTION 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4 UNDERSTANDING YOUR INSTRUMENT PANEL 5 STARTING AND OPERATING 6 WHAT TO DO IN EMERGENCIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .279 6 7 MAINTAINING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS m Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 m Vehicle Identification Number . . . . . . . . . . . . . . . 6 m How To Use This Manual . . . . . . . . . . . . . . . . . . 4 m Vehicle Modifications/Alterations . . . . . . . . . . . . 7 m Warnings And Cautions . . . . . . . . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION This Owner’s Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by a Warranty Information Booklet and various customer-oriented documents. You are urged to read these publications carefully. Following the instructions and recommendations in this manual will help assure safe and enjoyable operation of your vehicle.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in an accident or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS m A Word About Your Keys . . . . . . . . . . . . . . . . . .12 m Security Alarm System . . . . . . . . . . . . . . . . . . . .18 ▫ Wireless Ignition Node (WIN) . . . . . . . . . . . . .12 ▫ Rearming Of The System . . . . . . . . . . . . . . . . .18 ▫ FOB With Integrated Key . . . . . . . . . . . . . . . . .13 ▫ To Arm The System . . . . . . . . . . . . . . . . . . . . .19 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ To Open The Trunk . . . . . . . . . . . . . . . . . . . . .25 m Trunk Lock And Release . . . . . . . . . . . . . . . . . . .35 ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . .25 m Trunk Safety Warning . . . . . . . . . . . . . . . . . . . . .36 ▫ Programming Additional Transmitters . . . . . . . .25 ▫ Trunk Emergency Release . . . . . . . . . . . . . . . .36 ▫ Transmitter Battery Service . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Event Data Recorder (EDR) . . . . . . . . . . . . . . .56 ▫ Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . . . .68 ▫ Child Restraint . . . . . . . . . . . . . . . . . . . . . . . .58 ▫ Safety Checks You Should Make Inside The Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . .69 m Engine Break-In Recommendations . . . . . . . . . . .67 m Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . .68 ▫ Transporting Passengers .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Fob with Integrated Key and a Wireless Ignition Node (WIN) with an integral ignition switch. You can insert the double-sided integrated key into the ignition switch with either side up. Keyless Go Feature This vehicle is equipped with the Keyless Go feature, refer to Section 5 of this manual for more information.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Fob With Integrated Key The Fob with Integrated Key operates the ignition switch. It also contains the Remote Keyless Entry (RKE) transmitter and a valet key, which stores in the rear of the Fob. 2 The valet key allows for entry into the vehicle should the battery in the vehicle or the Fob go dead. The valet key is also for locking the glove box. You can keep the valet key with you when valet parking.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Ignition Key Removal Place the shift lever in PARK. Turn the key to the LOCK position and then remove the key. NOTE: The power window switches, radio, power sunroof (if equipped), and ignition-powered power outlets will remain active for up to 60 minutes after the ignition switch is turned to the LOCK position. Opening either door will cancel this feature. The time for this feature is programmable.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key-In-Ignition Reminder If you open the driver’s door and the key is in the ignition, a chime will sound to remind you to remove the key. NOTE: The Key-In-Ignition reminder only sounds when the ignition key is placed in the LOCK or ACC position. SENTRY KEYT The Sentry Keyt Immobilizer System prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • The Sentry Keyt Immobilizer System is not compatible with aftermarket remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection. • Exxon/Mobil Speedpass™, additional RKE transmitters, or any other transponder-equipped components on the same key chain will not cause a fault unless the additional part is physically held against the transmitter being used to start the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE programming a blank transmitter to the vehicle electronics. A blank transmitter is one that has never been programmed. NOTE: When having the Sentry Keyt Immobilizer System serviced, bring all vehicle RKE transmitters with you to the authorized dealer. Customer Key Programming If you have two valid RKE transmitters with integrated keys, you can program new transmitters to the system by performing the following steps: 1.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If a programmed key is lost, see your authorized dealer to have all remaining keys erased from the system’s memory. This will prevent the lost key from starting your vehicle. The remaining keys must then be reprogrammed. All vehicle keys must be taken to an authorized dealer at the time of service to be reprogrammed. General Information The Sentry Keyt system complies with FCC rules Part 15 and with RSS-210 of Industry Canada.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Arm The System Remove the key from the ignition switch and either press a power door LOCK switch while the driver or passenger door is open or press the LOCK button on the Remote Keyless Entry (RKE) transmitter. After the last door is closed, or if all doors are closed, the system will arm itself in about 16 seconds. During that time, the Vehicle Security Alarm Indicator Light will flash. If it does not illuminate, the system is not arming.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Vehicle Security Alarm System is designed to protect your vehicle; however, you can create conditions where the system will give you a false alarm. If one of the previously-described arming sequences has occurred, the system will arm regardless of whether you are in the vehicle or not. If you remain in the vehicle and open a door, the alarm will sound. If this occurs, disarm the system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 REMOTE KEYLESS ENTRY The Remote Keyless Entry (RKE) allows you to lock or unlock the doors, open the trunk, or activate the Panic Alarm from distances up to about 35 ft (11 m) using a hand-held radio transmitter. The transmitter need not be pointed at the vehicle to activate the system.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remote Key Unlock, Driver Door/All Doors First This feature lets you program the system to unlock either the driver’s door or both doors on the first press of the UNLOCK button on the transmitter. Refer to “Remote Key Unlock,” under “Personal Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center (EVIC)” in Section 4. 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center (EVIC)” in Section 4. • When not using the EVIC, perform the following steps: 1. Press and hold the UNLOCK button on a programmed transmitter for at least four seconds, but no longer than 10 seconds. Then, press and hold the LOCK button while still holding the UNLOCK button. 2. Release both buttons at the same time. 3.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Sound Horn with Remote Key Lock This feature will cause the horn to chirp when the doors are locked with the transmitter. This feature can be turned on or turned off. Refer to “Sound Horn with Remote Key Lock,” under “Personal Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center (EVIC)” in Section 4. • When not using the EVIC, perform the following steps: 1.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Open The Trunk Press the TRUNK button on the transmitter two times within five seconds to open the trunk. Using The Panic Alarm To turn the Panic Alarm feature ON or OFF, press and hold the PANIC button on the transmitter for at least one second and release. When the Panic Alarm is on, the headlights and park lights will flash, the horn will pulse on and off, and the interior lights will turn on.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Battery access is through a door located on the rear of the fob. Insert a small, flat blade screwdriver into the slot and gently pry open the access door. 2. Remove and replace the batteries. Avoid touching the new batteries with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol. 3. Reposition the access door panel over the battery opening and snap into place.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If your RKE transmitter fails to operate from a normal distance, check for these two conditions: 1. A weak battery in the transmitter. The expected life of the battery is a minimum of three years. How To Use Remote Start All of the following conditions must be met before the engine will remote start: • Shift lever in PARK 2. Closeness to a radio transmitter such as a radio station tower, airport transmitter, and some mobile or CB radios.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Enter Remote Start Mode Press and release the REMOTE START button on the RKE transmitter twice, within five seconds. The parking lights will flash and the horn will honk twice (if programmed). Then, the engine will start and the vehicle will remain in the Remote Start mode for a 15-minute cycle. To Exit Remote Start Mode without Driving the Vehicle Allow the engine to run for the entire 15-minute cycle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 To Turn Off the Engine While in Remote Start Mode Press and release the REMOTE START button one time. 2 NOTE: To avoid inadvertent shut downs, the system will disable the one time press of the REMOTE START button for two seconds after receiving a valid Remote Start request. DOOR LOCKS Manual Door Locks To lock each door, push the door lock plunger on each door trim panel downward.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors before you drive as well as when you park and leave the vehicle. Power Door Locks The power door lock switch is located on each door trim panel. Use this switch to lock or unlock the doors. • When leaving the vehicle, always remove the key from the ignition and lock your vehicle. Unsupervised use of vehicle equipment may cause severe personal injuries and death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the key in the vehicle. Removing the key or closing the door will allow the locks to operate. If a door is open, the key is in the ignition, and the ignition is in the LOCK or ACC position, a chime will sound as a reminder to remove the key. Automatic Door Locks The doors will lock automatically if all of the following conditions are met: 1.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Unlock Doors on Exit Programming The Automatic Unlock Doors On Exit feature can be enabled or disabled. Refer to “Unlock Doors Automatically on Exit,” under “Personal Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center (EVIC)” in Section 4. • When not using the EVIC, perform the following steps: 1. Enter the vehicle and close all doors. 2. Place the key in the ignition switch. 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS Power Windows The window controls on the driver’s door control both of the door windows. 33 There is a single window control on the passenger’s door trim panel that operates the window on the passenger’s door. The window controls will operate only when the ignition switch is in the ON or ACC position. NOTE: The door window will lower slightly if it is closed completely when opening the door.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the windows while operating the power window switches. Such entrapment may result in serious injury or death. AUTO-Down Feature The driver’s door power window switch and passenger door power window switch on some models have an AUTOdown feature.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE TRUNK LOCK AND RELEASE The trunk lid can be released from inside the vehicle by pressing the Trunk Release button. The button is located on the instrument panel to the left of the steering wheel. NOTE: The transmission must be in PARK before the switch will operate. 35 The trunk lid can be released from outside the vehicle by pressing the Trunk Release button on the Remote Keyless Entry (RKE) transmitter twice within five seconds.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE TRUNK SAFETY WARNING Trunk Emergency Release WARNING! Do not allow children to have access to the trunk, either by climbing into the trunk from outside, or through the inside of the vehicle. Always close the trunk lid when your vehicle is unattended. Once in the trunk, young children may not be able to escape, even if they entered through the rear seat. If trapped in the trunk, children can die from suffocation or heat stroke.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 OCCUPANT RESTRAINTS Some of the most important safety features in your vehicle are the restraint systems. These include the front and rear seat belts for the driver and all passengers, the front airbags for both the driver and front passenger, and the supplemental side curtain airbags for the driver and passengers seated next to a window.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown from the vehicle. Seat belts reduce the possibility of ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All seating positions in your vehicle are equipped with lap/shoulder belts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the front seat. 2 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up a bit on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. 5. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. The retractor will withdraw any slack in the belt.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Pretensioners The seat belts for both front seating positions are equipped with pretensioning devices that are designed to remove any slack from the seat belts in the event of a collision. These devices improve the performance of the seat belt system by assuring that the belt is tight around the occupant in a collision. Pretensioners work for all size occupants, including those in child restraints.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. With all doors closed, and the ignition switch in any position except ON or START, buckle the driver’s seat belt. 4. Turn the ignition switch to the LOCK position. A single chime will sound to signify that you have successfully completed the programming. 2. Turn the ignition switch to the ON position, but do not start the engine. Wait for the Seat Belt Reminder Light to turn off and then proceed to the next step.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How to Engage the Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted. 3. Allow the belt to retract. As the belt retracts, you will here a clicking sound. This indicates the safety belt is now in the Automatic Locking mode.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! glove compartment. The words SRS AIRBAG are embossed on the airbag covers. Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the seat belt is not long enough when it is worn low and snug and in the recommended seating position. Remove and store the extender when not needed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The front airbags have a multistage inflator design. This allows the airbag to have different rates of inflation that are based on collision severity. 47 This vehicle is also equipped with supplemental side curtain airbags (located above the side windows) to protect the driver and passenger sitting next to a window. Their covers are also labeled SRS AIRBAG. WARNING! • Do not put anything on or around the front airbag covers or attempt to open them.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Do not stack luggage or other cargo up high enough to block the location of the side curtain airbag. The area where the side curtain airbag is located should remain free from any obstructions. • Do not have any accessory items installed which will alter the roof, including adding a sunroof to your vehicle. Do not add roof racks that require permanent attachments (bolts or screws) for installation on the vehicle roof.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Infants in rear-facing child restraints should NEVER ride in the front seat of a vehicle with a passenger front airbag. An airbag deployment could cause severe injury or death to infants in that position. 2. Children who are not big enough to wear the vehicle seat belt properly should be secured in the rear seat in child restraints or belt-positioning booster seats. (Refer to information on Child Restraint in this section.) 3.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Airbag System Components The airbag system consists of the following: • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly. In some collisions, the airbags won’t deploy at all. Always wear your seat belts even though you have airbags.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Knee Impact Bolsters • Front Acceleration Sensors • Driver and Front Passenger Seat Belt Pretensioners How the Airbag System Works • The Occupant Restraint Controller (ORC) determines if a frontal collision is severe enough to require the airbags to inflate. The front airbag inflators are designed to provide different rates of airbag inflation from direction provided by the ORC. The ORC will not detect rollover.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Ignoring the AIRBAG Warning Light in your instrument panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have the airbag system checked right away. • The Driver and Front Passenger Airbag/Inflator Units are located in the center of the steering wheel and the passenger side of the instrument panel.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The Supplemental Side Impact SRS Side Curtain Airbags are designed to activate only in certain side collisions. When the ORC detects a collision requiring the side curtain airbag to inflate, it signals the inflators on the crash side of the vehicle. A quantity of nontoxic gas is generated to inflate the side curtain airbag. The inflating side curtain airbag pushes the outside edge of the headliner out of the way and covers the window.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air. If the irritation continues, see your doctor. If these particles settle on your clothing, follow the garment manufacturer’s instructions for cleaning. • It is not advisable to drive your vehicle after the airbags have been deployed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Airbag System WARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. You could be injured because the airbags are not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper passenger side of the instrument panel. Do not modify the front bumper, vehicle body structure, or frame.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Event Data Recorder (EDR) In the event of an accident, your vehicle is designed to record up to five seconds of specific vehicle data parameters (see the following list) in an event data recorder prior to the moment of airbag deployment, or near deployment, and up to a quarter second of high-speed deceleration data during and/or after airbag deployment. EDR data are ONLY recorded if an airbag deploys, or nearly deploys, and are otherwise unavailable. NOTE: 1.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE a potentially sensitive nature, such as would identify a particular driver, vehicle, or crash, will be treated confidentially. Confidential data will not be disclosed by Chrysler LLC to any third party except when: 1. Used for research purposes, such as to match data with a particular crash record in an aggregate database, provided confidentiality of personal data is thereafter preserved, 2. Used in defense of litigation involving a Chrysler LLC product, 3.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Restraint Everyone in your vehicle needs to be buckled up all the time, including babies and children. Every state in the United States and all Canadian provinces require that small children ride in proper restraint systems. This is the law, and you can be prosecuted for ignoring it. Children 12 years and younger should ride properly buckled up in a rear seat, if available.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 infant carriers do, so they can be used rearward-facing by children who weigh more than 20 lbs (9 kg) but are less than one year old. Both types of child restraints are held in the vehicle by the lap/shoulder belt or the LATCH child restraint anchorage system. Refer to “LATCH — Child Seat Anchorage System (Lower Anchors and Tether for CHildren)” in this section.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Children too Large for Booster Seats Children who are large enough to wear the shoulder belt comfortably and whose legs are long enough to bend over the front of the seat when their back is against the seatback should use the lap/shoulder belt in a rear seat. • Make sure that the child is upright in the seat. • The lap portion should be low on the hips and as snug as possible. • Check belt fit periodically.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Standards. We also recommend that you make sure that you can install the child restraint in the vehicle where you will use it before you buy it. • The restraint must be appropriate for your child’s weight and height. Check the label on the restraint for weight and height limits. • Carefully follow the instructions that come with the restraint. If you install the restraint improperly, it may not work when you need it.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE kits or retrofit kits. You are urged to take advantage of all the available attachments provided with your child restraint in any vehicle. All three rear-seating positions have lower anchorages that are capable of accommodating LATCH-compatible child seats. You should NEVER install LATCHcompatible child seats so that two seats share a common lower anchorage.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Again, carefully follow the installation instructions that are provided with the child restraint system. The rear seat lower anchorages are round bars located at the rear of the seat cushion where it meets the seatback and are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap. • When using the LATCH attaching system to install a child restraint, please ensure that all seat belts not being used for occupant restraints are stowed and out of reach of children. It is recommended that before installing the child restraint, buckle the seat belt so the seat belt is tucked behind the child restraint and out of reach.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE keep the belt tight; however, any seat belt system will loosen with time, so check the belt occasionally and pull it tight if necessary. The seat belt must be in the Automatic Locking mode in order to enable a child restraint to be tightly installed. Refer to “Automatic Locking Mode” in this section. A locking clip should not be necessary once the automatic locking feature is enabled. Position the shoulder and lap belt on the child restraint.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To attach a child restraint tether strap: 1. Rotate the cover over the anchor directly behind the seat where you are placing the child restraint. 3. Attach the tether strap hook (A) of the child restraint to the anchor (B) and remove slack in the tether strap according to the child restraint manufacturer’s instructions. NOTE: Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Transporting Pets Airbags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about and possibly injured, or injure a passenger during panic braking or in a collision. Pets should be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat belts. ENGINE BREAK-IN RECOMMENDATIONS A long break-in period is not required for the drivetrain (engine, transmission, and rear axle) in your new vehicle.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SAFETY TIPS Transporting Passengers NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. WARNING! Lock Your Vehicle Always remove the key from the ignition and lock all doors when leaving the vehicle unattended, even in your own driveway or garage. Try to park your vehicle in a well-lit area and never invite theft by leaving articles of value exposed. Exhaust Gas It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area. If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling controls to force outside air into the vehicle. Set the blower at high speed. If you are required to drive with the trunk open, make sure that all windows are closed and the climate control blower switch is set at high speed.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbag Warning Light The light should come on and remain on for six to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is not lit during starting, see your authorized dealer. If the light stays on, flickers, or comes on while driving, have the system checked by an authorized dealer. Defroster Check operation by selecting the defrost mode and place the blower control on high speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS m Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 ▫ Automatic Dimming Inside Mirror . . . . . . . . . .75 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . . .75 ▫ Exterior Mirrors Folding Feature — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . .76 3 m Hands-Free Communication (UConnectt) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . .78 ▫ Operation . . . . . . . . . . . . . . . . . .
72 UNDERSTANDING THE FEATURES OF YOUR VEHICLE m Voice Recognition System — If Equipped . . . . . . 104 m Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 ▫ Voice Recognition System (VR) Operation . . . . 104 ▫ Headlight Switch . . . . . . . . . . . . . . . . . . . . . 116 ▫ Commands . . . . . . . . . . . . . . . . . . . . . . . . . . 105 ▫ Automatic Headlights — If Equipped . . . . . . . 117 ▫ Voice Training . . . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 73 m Windshield Wipers And Washers . . . . . . . . . . . . 122 ▫ To Resume Speed . . . . . . . . . . . . . . . . . . . . . 128 ▫ Intermittent Wiper System . . . . . . . . . . . . . . . 122 ▫ To Vary The Speed Setting . . . . . . . . . . . . . . . 128 ▫ Mist Feature . . . . . . . . . . . . . . . . . . . . . . . . . 123 ▫ To Accelerate For Passing . . . . . . . . . . . . . . . 128 ▫ Windshield Washers . . . . . . . . . . . . . . . . . . .
74 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Troubleshooting Tips . . . . . . . . . . . . . . . . . . . 135 ▫ Ignition Off Operation . . . . . . . . . . . . . . . . . . 139 ▫ General Information . . . . . . . . . . . . . . . . . . . 136 ▫ Sunroof Fully Closed . . . . . . . . . . . . . . . . . . . 139 m Power Sunroof — If Equipped . . . . . . . . . . . . . 136 m Electrical Power Outlets . . . . . . . . . . . . . . . . . . 140 ▫ Opening Sunroof - Manually . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS 75 CAUTION! Automatic Dimming Inside Mirror This mirror automatically adjusts for annoying headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light next to the button will illuminate to indicate when the dimming feature is activated. To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror.
76 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Vehicles and other objects seen in the passenger-side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger-side convex mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the passenger-side convex mirror. Exterior Mirrors Folding Feature — If Equipped Some models have exterior mirrors that are hinged.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 77 Illuminated Vanity Mirrors — If Equipped An illuminated vanity mirror is on the sun visor. To use the mirror, rotate the sun visor downward and swing the mirror cover upward. The light turns on automatically. Closing the mirror cover turns off the light. Power Mirror Control Heated Remote Control Mirrors — If Equipped These mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the Electric Rear Window Defroster.
78 UNDERSTANDING THE FEATURES OF YOUR VEHICLE HANDS-FREE COMMUNICATION (UConnectT) — IF EQUIPPED NOTE: For UConnectt customer support, visit the following websites: NOTE: The sales code RER, REN and REU radios contain an integrated Hands-Free Communication (UConnectt) system. Refer to your “Navigation User’s Manual” for UConnectt system operating instructions for these radios. • www.chrysler.com/uconnect UConnectt is a voice-activated, hands-free, in-vehicle communications system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE different electronic devices to connect to each other without wires or a docking station, so UConnectt works no matter where you stow your cellular phone (be it your purse, pocket, or briefcase), as long as your phone is turned on and has been paired to the vehicle’s UConnectt system. The UConnectt system allows up to seven cellular phones to be linked to the system. Only one linked (or paired) cellular phone can be used with the system at a time.
80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The radio display will be used for visual prompts from the UConnectt system such as 9CELL9 or caller ID on certain radios. Operation Voice commands can be used to operate the UConnectt system and to navigate through the UConnectt menu structure. Voice commands are required after most UConnectt system prompts. You will be prompted for a specific command and then guided through the available options.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE To activate the UConnectt system from idle, simply press the PHONE button and follow the audible prompts for directions. All UConnectt system sessions begin with a press of the PHONE button on the radio control head. Cancel Command At any prompt, after the beep, you can say 9Cancel9 and you will be returned to the main menu. However, in a few instances the system will take you back to the previous menu.
82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • You will then be asked to give your cellular phone a priority level between 1 and 7, with 1 being the highest priority. You can pair up to seven cellular phones to your UConnectt system. However, at any given time, only one cellular phone can be in use, connected to your UConnectt system. The priority allows the UConnectt system to know which cellular phone to use if multiple cellular phones are in the vehicle at the same time.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83 • The system will prompt you to say the name of the person you want to call. • After the 9Ready9 prompt and the following beep, say 9Phonebook New Entry.9 • After the 9Ready9 prompt and the following beep, say the name of the person you want to call. For example, you can say 9John Doe,9 where John Doe is a previously stored name entry in the UConnectt phonebook.
84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The UConnectt system will allow you to enter up to 32 names in the phonebook with each name having up to four associated phone numbers and designations. Each language has a separate 32-name phonebook accessible only in that language. Phonebook Download UConnectt allows the user to download entries from their phone via Bluetootht. To use this feature, press the PHONE button and say “Phonebook Download.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • You will then be asked for the name of the phonebook entry that you wish to edit. • Next, choose the number designation (home, work, mobile, or pager) that you wish to edit. • When prompted, recite the new phone number for the phonebook entry that you are editing. After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in the phonebook, call the number you just edited, or return to the main menu.
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After you enter the name, the UConnectt system will ask you which designation you wish to delete: home, work, mobile, pager, or all. Say the designation you wish to delete. • Note that only the phonebook entry in the current language is deleted. Delete All Entries in the UConnectt Phonebook • Press the PHONE button to begin. • After the 9Ready9 prompt and the following beep, say 9Phonebook Erase All.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Phone Call Features The following features can be accessed through the UConnectt system if the feature(s) are available on your cellular service plan. For example, if your cellular service plan provides three-way calling, this feature can be accessed through the UConnectt system. Check with your cellular service provider for the features that you have.
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Place/Retrieve a Call From Hold To put a call on hold, press the PHONE button until you hear a single beep. This indicates that the call is on hold. To bring the call back from hold, press and hold the PHONE button until you hear a single beep. Toggling Between Calls If two calls are in progress (one active and one on hold), press the PHONE button until you hear a single beep, indicating that the active and hold status of the two calls have switched.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Redial • Press the PHONE button to begin. • After the 9Ready9 prompt and the following beep, say 9Redial.9 89 ends, or until the vehicle battery condition dictates cessation of the call on the UConnectt system and transfer of the call to the mobile phone. • The UConnectt system will call the last number that was dialed from your cellular phone.
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the 9Ready9 prompt and the following beep, say the name of the language you wish to switch to English, Espanol, or Francais. If the phone is not reachable and the UConnectt system is operational, you may reach the emergency number as follows: • Continue to follow the system prompts to complete language selection. • Press the PHONE button to begin. After selecting one of the languages, all prompts and voice commands will be in that language.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Your phone must be turned on and paired to the UConnectt system to allow use of this vehicle feature in emergency situations, when the cell phone has network coverage and stays paired to the UConnectt system. Towing Assistance If you need towing assistance: • Press the PHONE button to begin. • After the 9Ready9 prompt and the following beep, say 9Towing Assistance.
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When calling a number with your UConnectt system that normally requires you to enter in a touch-tone sequence on your cellular phone keypad, you can press the “Voice Recognition” button and say the sequence you wish to enter, followed by the word 9Send.9 For example, if required to enter your PIN followed with a pound, (3 7 4 6 #), you can press the “Voice Recognition” button and say, 93 7 4 6 # Send.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turning Confirmation Prompts On/Off Turning confirmation prompts off will stop the system from confirming your choices (e.g., the UConnectt system will not repeat a phone number before you dial it). • Press the PHONE button to begin. • After the 9Ready9 prompt and the following beep, say 9Setup Confirmations.9 The UConnectt system will play the current confirmation prompt status and you will be given the choice to change it.
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Mute/Un-Mute (Mute Off) When you mute the UConnectt system, you will still be able to hear the conversation coming from the other party, but the other party will not be able to hear you. In order to mute the UConnectt system: • Press the “Voice Recognition” button. • Following the beep, say 9Mute.9 In order to un-mute the UConnectt system: • Press the “Voice Recognition” button. • Following the beep, say 9Mute off.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, say 9List Phones.9 • The UConnectt system will play the phone names of all paired cellular phones in order from the highest to the lowest priority. To “select” or “delete” a paired phone being announced, press the “Voice Recognition” button and say “Select” or “Delete.” Also, see the next two sections for an alternate way to “select” or “delete” a paired phone.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Things You Should Know About Your UConnectT System UConnectt Tutorial To hear a brief tutorial of the system features, press the PHONE button and say “UConnectt Tutorial.” Voice Training For users experiencing difficulty with the system recognizing their voice commands or numbers, the UConnectt system Voice Training feature may be used. To enter this training mode, follow one of the two following procedures: From outside the UConnectt mode (e.g.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 • Speak normally, without pausing, just as you would speak to a person sitting a few feet/meters away from you. • When navigating through an automated system such as voice mail, or when sending a page, at the end of speaking the digit string, make sure to say 9Send.9 • Make sure that no one other than you is speaking during a voice recognition period. • Storing names in the phonebook when the vehicle is not in motion is recommended.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather conditions, and • operation from the driver’s seat. • Performance, such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and not the UConnectt system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 3
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 3
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) Voice Commands Primary Alternate(s) call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing phonebook previous record again redial Voice Commands Alternate(s) pairing phone book 103 Voice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call UConnectt Tutorial try again voice training work yes 3
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. recognize user voice commands may be negatively affected by rapid speaking or a raised voice level.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pressing the VR hard-key while the system is speaking is known as “barging in.” The system will be interrupted and you can add or change commands. This will become helpful once you start to learn the options. NOTE: At any time, you can say the words CANCEL, HELP, or MAIN MENU. These commands are universal and can be used from any menu. All other commands can be used depending upon the active application.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Main Menu Start a dialogue by pressing the VR hard-key. You may say MAIN MENU to switch to the main menu. • MAIN MENU (to switch to the main menu) In this mode, you can say the following commands: Radio FM To switch to the FM band say FM or RADIO FM.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • NEXT CHANNEL (to select the next channel) • PREVIOUS CHANNEL (to select the previous channel) • LIST CHANNEL (to hear a list of available channels) • SELECT NAME (to say the name of a channel) • RADIO MENU (to switch to the radio menu) • MAIN MENU (to switch to the main menu) Disc To switch to the disc mode say DISC.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE − PREVIOUS (to play the previous memo) − DELETE (to delete a memo) • DELETE ALL (to delete all memos) NOTE: Keep in mind that you have to press the VR hard-key first and wait for the beep, before speaking the “barge in” commands. Voice Training For users experiencing difficulty with the system recognizing their voice commands or numbers, the UConnectt system Voice Training feature may be used. 1.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE SEATS Easy Entry Seats Pushing the lever upward (toward the front of the vehicle) allows the seat back to dump forward and the seat to slide forward. This allows for easier access to the rear seat. Power Seats The power seat switch is on the outboard side of the seat near the floor. Use this switch to move the driver’s seat up or down, forward or rearward, or to tilt the seat.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. Front Seat Back Recline To recline: 1. Lean forward in the seat and lift the handle, then lean back to the desired position and release the handle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lumbar Support This feature allows you to increase or decrease the amount of lumbar support. Turn the control lever forward to increase and rearward to decrease the desired amount of lumbar support. 111 Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear. Adjust the restraint so that the upper edge is as high as practical. To raise it, pull upward on the head restraint.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Seats Heated seats provide comfort and warmth on cold days and can help soothe sore muscles and backs. The heaters provide the same heat level for both cushion and back. The driver seat and front passenger seat are heated. The controls for each heater are located near the bottom center of the instrument panel. After turning on the ignition, you can choose from High, Low, or Off heat settings.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE illuminated changes from two to one, indicating the change. Operation on the low setting also turns off automatically after 30 minutes. NOTE: Once a heat setting is selected, heat will be felt within two to five minutes. Folding Rear Seat — If Equipped The rear seatbacks can be folded forward to provide an additional storage area. Pull on the loops shown in the illustration to fold down either or both seatbacks. These loops can be tucked away when not in use.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When the seatback is folded to the upright position, make sure it is latched by strongly pulling on the top of the seatback above the seat strap. TO OPEN AND CLOSE THE HOOD Two latches must be released to open the hood. First, pull the hood release lever located under the left side of the instrument panel. WARNING! • Be certain that the seatback is securely locked into position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Next, move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood. 115 To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 6 in (15 cm), and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS Headlight Switch The headlight switch is located on the left side of the instrument panel. This switch controls the operation of the headlights, parking lights, instrument panel lights, instrument panel light dimming, interior lights, and fog lights. Headlight Switch Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Headlights — If Equipped This system automatically turns the headlights on or off according to ambient light levels. To turn the system on, rotate the headlight switch counterclockwise to the AUTO (A) position. When the system is on, the headlight time delay feature is also on. This means the headlights will stay on for up to 90 seconds after you turn the ignition switch off.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you turn the headlights, park lights, or ignition switch ON again, the system will cancel the delay. If you turn the headlights off before the ignition, they will turn off in the normal manner. NOTE: The lights must be turned off within 45 seconds of turning the ignition OFF to activate this feature. The Headlight delay time is programmable.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Multifunction Control Lever The multifunction control lever controls the operation of the turn signals, headlight beam selection, and passing lights. The lever is located on the left side of the steering column. 119 Turn Signals Move the multifunction control lever up or down and the corresponding turn signal indicator in the instrument cluster flashes to show proper operation of the front and rear turn signal lights.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Highbeam/Lowbeam Select Switch Push the multifunction control lever away from you to switch the headlights to HIGH beam. Pull the lever toward you to switch the headlights back to LOW beam. Flash to Pass You can signal another vehicle with your headlights by lightly pulling the multifunction control lever toward you. This will cause the headlights to turn on at high beam and remain on until the lever is released.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Interior Lights The interior lights come on when a door is opened. To protect the battery, the interior lights will turn off automatically 10 minutes after the ignition switch is moved to the LOCK position. This will occur if the interior lights were switched on manually or are on because a door is open. This includes the glove box light, but not the trunk light. To restore interior light operation, either turn the ignition switch ON or cycle the light switch.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS The multifunction control lever operates the windshield wipers and washer when the ignition switch is in the ON position. The lever is located on the left side of the steering column. Rotate the end of the multifunction control lever to the first detent past the intermittent settings for low speed wiper operation, or to the second detent past the intermittent settings for high speed wiper operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE regulate the wipe interval from a minimum of one cycle every second to a maximum of approximately 23 seconds between cycles. WARNING! Sudden loss of visibility through the windshield could lead to an accident. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with the defroster before and during windshield washer use.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights On with Wipers (Available with Auto Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the headlight switch is placed in the AUTO (A) position. In addition, the headlights will turn off when the wipers are turned off if they were turned on by this feature. The Headlights On with Wipers feature can be enabled or disabled.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. TILT/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping control handle is located below the steering wheel at the end of the steering column.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE outward or push it inward as desired. To lock the steering column in position, push the control handle inward until fully engaged. Electronic Speed Control Operation The speed control lever located on the right side of the steering wheel operates the system. WARNING! Do not adjust the steering wheel while driving. The telescoping adjustment must be locked while driving.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 To Activate Push and release the ON/OFF button located on the end of the speed control lever. The indicator light in the instrument cluster will illuminate to show that the speed control system is on. To turn the system off, push and release the ON/OFF button again. The system and the indicator light will turn off. To Set At A Desired Speed When the vehicle reaches the speed desired, push the lever downward to SET DECEL and release.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pushing and releasing the ON/OFF button or turning off the ignition erases the set speed from memory. To Resume Speed If you deactivated the speed control without erasing the set speed from memory and your vehicle speed is above 20 mph (32 km/h), you can resume the previous set speed. To do so, push the lever upward to RESUME ACCEL and release. Then remove your foot from the accelerator pedal.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 On steep hills, a greater speed loss or gain may occur, so it may be preferable to drive without speed control. WARNING! 3 Speed control can be dangerous where the system can’t maintain a constant speed. Your vehicle could go too fast for the conditions and you could lose control. An accident could be the result. Don’t use speed control in heavy traffic or on roads that are winding, icy, snow-covered, or slippery.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE These lights also turn on when a door is opened, or when the UNLOCK button on the Remote Keyless Entry (RKE) transmitter is pressed, or when the dimmer control is turned fully upward, past the second detent. The HomeLinkt buttons are located in the overhead console, and contain one, two, or three dots/lines designating the different HomeLinkt channels.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Your motorized door or gate will open and close while you are training the Universal Transceiver. Do not train the transceiver if people or pets are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by federal safety standards. This includes most garage door opener models manufactured after 1982. Do not use a garage door opener without these safety features.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) from the HomeLinkt buttons while keeping the EVIC display in view. NOTE: Some gate operators and garage door openers may require you to replace Step 3 with procedures noted in the “Gate Operator/Canadian Programming” section. For optimal training, point the battery end of the handheld transmitter away from the HomeLinkt. 4. Press and hold the just-trained HomeLinkt button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is NOT the button normally used to open and close the door). 133 6. Firmly press and release the “learn” or “training” button. The name and color of the button may vary by manufacturer. NOTE: There are 30 seconds in which to initiate the next step after the “Learn” button has been pressed. 7.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Gate Operator/Canadian Programming Canadian radio-frequency laws require transmitter signals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLinkt to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to “time-out” in the same manner.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reprogramming A Single HomeLinkT Button To reprogram a channel that has been previously trained, follow these steps: 1. Turn the ignition switch to the ON/RUN position. 2. Press and hold the desired HomeLinkt button for 20 seconds until the EVIC display states “CHANNEL # TRAINING.” Do not release the button. 3. Without releasing the button, proceed with Programming HomeLinkt Step 2 and follow all remaining steps.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with FCC rules Part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console. 1. This device may not cause harmful interference 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. 137 Opening Sunroof - Manually Press and hold the switch in the rearward position. Release the switch when the sunroof is in the position desired and it will stop moving.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the switch in the forward position, the sunroof will close fully and then stop automatically. Release the switch once the sunroof stops moving. Closing Sunroof - Express Press the switch forward and release, and the sunroof will close automatically from any position. The sunroof will close fully and stop automatically. This is called Express Close. During Express Close operation, any movement of the sunroof switch will stop the sunroof.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Sunshade Operation The sunshade can be opened manually. However, the sunshade will open automatically as the sunroof opens. Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel. NOTE: The sunshade cannot be closed if the sunroof is open. Ignition Off Operation The power sunroof switch will remain active for up to 60 minutes after the ignition switch is turned OFF. Opening either door will cancel this feature.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRICAL POWER OUTLETS There are two 12-volt electrical outlets on this vehicle. Both of the outlets are protected by a fuse. The front 12-volt power outlet has power available only when the ignition is ON. This outlet will also operate a conventional cigar lighter unit. NOTE: If desired, the front power outlet can be converted by your authorized dealer to provide power with the ignition switch in the LOCK position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE The center console outlet is powered directly from the battery (power available at all times). Items plugged into this outlet may discharge the battery and/or prevent engine starting. Center Console Power Outlet 141 Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery even when not in use (i.e., cellular phones, etc.).
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS Front Cupholders The front cupholders are located in the center console. Rear Cupholders The rear seat cupholders are located in the center armrest between the rear seats. The cupholders are positioned forward in the armrest and side-by-side to provide convenient access to beverage cans or bottles while maintaining a resting place for the rear occupants’ elbows.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONSOLE FEATURES Sliding Center Console Armrest The center console armrest slides forward with three detents to provide flexibility for comfort, cupholder use, and shifting ease. Sliding Console Armrest 143 Console Storage The center console has a storage compartment located underneath the armrest, and also contains a 12-volt power outlet and a molded-in coin holder (designed to hold various size coins).
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES Rear Window Defroster The pushbutton for the rear window defroster is located on the mode knob of the climate control switch bank. Press this button to turn on the rear window defroster and the electric remote control heated mirrors (if equipped). An amber light shows that the defroster is on. The defroster will automatically turn off after about ten minutes. For an additional five minutes of operation, press the switch again.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS m Instrument Panel Features . . . . . . . . . . . . . . . . . 148 ▫ Compass Display . . . . . . . . . . . . . . . . . . . . . 169 m Instrument Cluster . . . . . . . . . . . . . . . . . . . . . . 149 ▫ Driver-Selectable Surround Sound (DSS) – If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . 171 m Instrument Cluster Description . . . . . . . . . . . . . 150 m Electronic Vehicle Information Center (EVIC) . . .
146 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Electrical Disturbances . . . . . . . . . . . . . . . . . . 175 ▫ AM Reception . . . . . . . . . . . . . . . . . . . . . . . 175 ▫ FM Reception . . . . . . . . . . . . . . . . . . . . . . . . 175 m Sales Code REQ — AM/FM Stereo Radio And 6–Disc CD/DVD Changer (MP3/WMA AUX Jack) . . . . . . . . . . . . . . . . . . 176 ▫ Operating Instructions - Radio Mode . . . . . . . 177 ▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play, DVD-Video) . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 147 ▫ Operating Instructions - Satellite Mode . . . . . . 197 m CD/DVD Disc Maintenance . . . . . . . . . . . . . . . 202 ▫ Operating Instructions - Hands-Free Phone (If Equipped) . . . . . . . . . . . . . . . . . . . . . . . . 199 m Radio Operation And Cellular Phones . . . . . . . . 202 m Kickert High Performance Sound System With Driver-Selectable Surround (DSS) – If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . .
148 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 2 3 4 — Air Outlet — Instrument Cluster — Glove Box — Radio 5 6 7 8 — — — — Heated Seat Switch ESP OFF Switch Hazard Warning Switch Climate Control 9 — Ignition Switch 10 — Trunk Release Switch 11 — Headlight Switch
UNDERSTANDING YOUR INSTRUMENT PANEL 149 INSTRUMENT CLUSTER 4
150 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTION 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. Trip Odometer Button Press this button to change the display from odometer to either of two trip odometer settings. The letter “A” or “B” will appear when in the trip odometer mode. Push in and hold the button for two seconds to reset the trip odometer to 0 mi (km). The odometer must be in TRIP mode to reset it. 3.
UNDERSTANDING YOUR INSTRUMENT PANEL 7. Electronic Throttle Control (ETC) Warning Light This light will turn on briefly as a bulb check when the ignition switch is turned ON. This light will also turn on while the engine is running if there is a problem with the Electronic Throttle Control system. If the light comes on while the engine is running, safely bring the vehicle to a complete stop as soon as possible, place the shift lever in PARK, and cycle the ignition key. The light should turn off.
152 UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, refer to Section 7 and follow the warnings under the Cooling System Pressure Cap paragraph. 9. Turn Signal Indicator Light The arrow will flash with the exterior turn signal when the turn signal lever is operated.
UNDERSTANDING YOUR INSTRUMENT PANEL 12. Electronic Stability Program (ESP)/Traction Control System (TCS) Indicator Light If this indicator light flashes during acceleration, ease up on the accelerator and apply as little throttle as possible. Adapt your speed and driving to the prevailing road conditions, and do not switch off the ESP. 13.
154 UNDERSTANDING YOUR INSTRUMENT PANEL 16. Seat Belt Reminder Light This light will turn on for five to eight seconds as a bulb check when the ignition switch is first turned ON. A chime will sound if the driver’s seat belt is unbuckled during the bulb check. The Seat Belt Warning Light will flash or remain on continuously if the driver’s seat belt remains unbuckled after the bulb check or when driving. 17.
UNDERSTANDING YOUR INSTRUMENT PANEL 20. Brake Warning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on, it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the Anti-Lock Brake System (ABS). The dual brake system provides a reserve braking capacity to a portion of the hydraulic system in the event of a failure.
156 UNDERSTANDING YOUR INSTRUMENT PANEL remain on if the parking brake is applied or if a brake fault is detected. If the parking brake is not applied and the light remains on, or if the light does not turn on, have the light inspected by an authorized dealer. NOTE: The light will turn on when the ignition switch is in the ON position and the parking brake is applied. This light shows only that the parking brake is applied. It does not show the degree of brake application. 21.
UNDERSTANDING YOUR INSTRUMENT PANEL maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale.
158 UNDERSTANDING YOUR INSTRUMENT PANEL 23. Anti-Lock Brake Warning Light This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, then the Anti-Lock portion of the brake system is not functioning and service is required. However, the conventional brake system will continue to operate normally if the BRAKE warning light is not on.
UNDERSTANDING YOUR INSTRUMENT PANEL ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) 159 equipped with steering wheel-mounted buttons (described in this section) are also equipped with the EVIC.
160 UNDERSTANDING YOUR INSTRUMENT PANEL • Surround Sound Modes (If Equipped with DriverSelectable Surround [DSS]) also functions as a remote sound system control. Refer to “Remote Sound System Controls” in this section. • Performance Features SCROLL Button Press the SCROLL button to scroll through Trip Functions, Performance Pages, Navigation (If Equipped), System Status Messages, and Personal Settings (Customer Programmable Features). The SCROLL button also functions as a remote sound system control.
UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Vehicle Information Center (EVIC) Displays When the appropriate conditions exist, the Electronic Vehicle Information Center (EVIC) displays the following messages: • Left/Right Door Ajar • Turn Signal On (with a continuous warning chime if the vehicle is driven more than 1 mi [1.
162 UNDERSTANDING YOUR INSTRUMENT PANEL • Left Rear Low Pressure (with a single chime) • 1/8 Mile • Right Front Low Pressure (with a single chime) • 1/4 Mile • Right Rear Low Pressure (with a single chime) • Instantaneous G-Force • Check TPM System (with a single chime) • Peak G-Force • ESP Off • Digital Speedometer • Check Gascap Engine Oil Change Indicator System • Insert Key/Turn To Run Oil Change Required Your vehicle is equipped with an engine oil change indicator system.
UNDERSTANDING YOUR INSTRUMENT PANEL 163 Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. To turn off the message temporarily, press and release the MENU button. To reset the oil change indicator system (after performing the scheduled maintenance) refer to the following procedure. Trip Functions Press and release the MENU button until one of the following Trip Functions displays in the EVIC: 1.
164 UNDERSTANDING YOUR INSTRUMENT PANEL Press the SCROLL button to cycle through all the Trip Computer functions. The Trip Functions mode displays the following. Average Fuel Economy Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will read “RESET” or show dashes for two seconds. Then, the history information will be erased, and the averaging will continue from the last fuel average reading before the reset.
UNDERSTANDING YOUR INSTRUMENT PANEL Elapsed Time Shows the total elapsed time of travel since the last reset when the ignition switch is in the ACC position. Elapsed time will increment when the ignition switch is in the ON or START position. Display Units of Measure in To make your selection, press and release the FUNCTION SELECT button until “US” or “METRIC” appears. To Reset The Display Reset will only occur while a resettable function is being displayed.
166 UNDERSTANDING YOUR INSTRUMENT PANEL The Performance Features include the following: • 0-60 mph (0-100 km/h) • Braking Distance • 1/8 Mile • 1/4 Mile • Instantaneous G-Force • Peak G-Force • Digital Speedometer To access, press and release the MENU button until Performance Features displays in the EVIC. Press the SCROLL button to cycle through the features. Press the FUNCTION SELECT button to select a feature.
UNDERSTANDING YOUR INSTRUMENT PANEL Braking Distance When selected, this screen displays the vehicle’s braking distance and the speed at which the brake pedal was depressed. • This feature will only function when applying the brakes at speeds above 30 mph (48 km/h). • Engaging the parking brake will disable this feature. • The word “READY” will flash when conditions are met for the event to begin. • The distance and speed measurements display while the event is taking place.
168 UNDERSTANDING YOUR INSTRUMENT PANEL • The time and speed will continue to display until the FUNCTION SELECT button is pressed. • Pressing the FUNCTION SELECT button will clear the current run and display the vehicle’s best 1/8 mile (1/4 mile) run. • When a force greater than zero is measured, the display will update the value as it climbs. As the G-Force falls, the peak forces will continue to display. • Pressing the FUNCTION SELECT button will clear the peak force values.
UNDERSTANDING YOUR INSTRUMENT PANEL Compass Display COMPASS Button The compass readings indicate the direction the vehicle is facing. Press and release the COMPASS button to display one of eight compass readings and the outside temperature. Automatic Compass Calibration This compass is self-calibrating, which eliminates the need to set the compass manually. When the vehicle is new, the compass may appear erratic and the EVIC will display “CAL” until the compass is calibrated.
170 UNDERSTANDING YOUR INSTRUMENT PANEL Compass Variance Compass Variance is the difference between magnetic North and geographic North. In some areas of the country, the difference between magnetic and geographic North is great enough to cause the compass to give false readings. If this occurs, the compass variance must be set using the following procedure: NOTE: Magnetic materials should be kept away from the overhead console. This is where the compass sensor is located.
UNDERSTANDING YOUR INSTRUMENT PANEL 1. Turn the ignition switch ON. 2. Press and hold the COMPASS button for approximately two seconds. 3. Press the SCROLL button until “Compass Variance” message and the last variance zone number displays in the EVIC. 4. Press and release FUNCTION SELECT button until the proper variance zone is selected according to the map. 5. Press and release the COMPASS button to exit.
172 UNDERSTANDING YOUR INSTRUMENT PANEL Personal Settings (Customer Programmable Features) Personal Settings allows the driver to set and recall features when the transmission is in PARK. Press and release the MENU button until Personal Settings displays in the EVIC. Use the SCROLL button to display one of the following choices. Language When in this display you may select one of three languages for all display nomenclature, including the trip functions and the navigation system (if equipped).
UNDERSTANDING YOUR INSTRUMENT PANEL on the first press of the RKE UNLOCK button. To make your selection, press and release the FUNCTION SELECT button until “Driver Door 1st Press” or “All Doors 1st Press” appears. Sound Horn with Remote Key Lock When ON is selected, a short horn sound will occur when the RKE LOCK button is pressed. This feature may be selected with or without the flash lights on lock/unlock feature.
174 UNDERSTANDING YOUR INSTRUMENT PANEL Turn Headlights On with Remote Key Unlock When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors are unlocked with the RKE transmitter. To make your selection, press and release the FUNCTION SELECT button until “OFF,” “30 sec.,” “60 sec.,” or “90 sec.” appears.
UNDERSTANDING YOUR INSTRUMENT PANEL RADIO GENERAL INFORMATION Radio Broadcast Signals Your new radio will provide excellent reception under most operating conditions. Like any system, however, car radios have performance limitations, due to mobile operation and natural phenomena, which might lead you to believe your sound system is malfunctioning.
176 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The radio, steering wheel radio controls, and 6-disc CD/DVD changer (if equipped) will remain active for up to 60 minutes after the ignition switch is turned OFF. Opening either door will cancel this feature. The time is programmable. Refer to “Delay Power Off to Accessories Until Exit,” under “Personal Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center (EVIC)” in Section 4.
UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME control knob a second time to turn off the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping.
178 UNDERSTANDING YOUR INSTRUMENT PANEL Phone Button (UConnectt Hands-Free Phone) — If Equipped Press this button to operate the Hands-Free Phone (UConnectt) feature (if equipped). Refer to “Hands-Free Communication (UConnectt)” in Section 3. If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped With UConnect” message will display on the radio screen. TIME Button Press the TIME button and the time of day will display.
UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in AM, FM or Satellite (if equipped) frequencies. 179 Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the treble tones.
180 UNDERSTANDING YOUR INSTRUMENT PANEL MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be selected. Many radio stations do not currently broadcast Music Type information.
UNDERSTANDING YOUR INSTRUMENT PANEL Program Type Top 40 Weather 16-Digit Character Display Top 40 Weather By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency station with the same selected Music Type name. The Music Type function only operates when in the FM mode. If a preset button is activated while in the Music Type (Program Type) mode, the Music Type mode will be exited and the radio will tune to the preset station.
182 UNDERSTANDING YOUR INSTRUMENT PANEL • Angle – Repeatedly pressing SELECT will change the viewing angle if supported by the DVD disc (if equipped). NOTE: The available selections for each of the above entries varies depending upon the disc. NOTE: These selections can only be made while playing a DVD. • Set Home Clock - Pressing the SELECT button allows you to set the clock. Turn the TUNE/SCROLL control knob to adjust the hours and then press and turn the TUNE/SCROLL control knob to adjust the minutes.
UNDERSTANDING YOUR INSTRUMENT PANEL 183 Subtitle Language — If Equipped Aspect Ratio — If Equipped Selecting this item allows you to choose a default subtitle language (effective only if the language is supported by the disc). You can select a language not listed by scrolling down and selecting 9other.9 Enter the country code using the TUNE/SCROLL control knob to scroll up and down to select the number and then push to select.
184 UNDERSTANDING YOUR INSTRUMENT PANEL SET Button — To Set the Pushbutton Memory When you are receiving a station that you wish to commit to pushbutton memory, press the SET button. The symbol SET 1 will now show in the display window. Select the button (1-6) you wish to lock onto this station and press and release that button. If a button is not selected within five seconds after pressing the SET button, the station will continue to play but will not be stored into pushbutton memory.
UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! The radio may shut down during extremely hot conditions. When this occurs, the radio will indicate “Disc Hot” and shut off until a safe temperature is reached. This shutdown is necessary to protect the optics of the DVD player and other radio internal components. NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
186 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the EJECT button for five seconds and all CDs will be ejected from the radio. The disc can be ejected with the radio and ignition OFF. SEEK Button (CD MODE) Press the right SEEK button for the next selection on the CD. Press the left SEEK button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the first second of the current selection.
UNDERSTANDING YOUR INSTRUMENT PANEL 187 Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs recorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file normally. UDF and Apple HFS formats are not supported. Multisession disc formats are supported by the radio.
188 UNDERSTANDING YOUR INSTRUMENT PANEL When using the MP3/WMA encoder to compress audio data to an MP3/WMA file, the bit rate and sampling frequencies in the following table are supported. In addition, variable bit rates (VBR) are also supported. The majority of MP3/WMA files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MPEG Specification MPEG-1 Audio Layer 3 Sampling Frequency (kHz) 48, 44.
UNDERSTANDING YOUR INSTRUMENT PANEL • Number of files and folders - Loading times will increase with more files and folders To increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. To create a single-session disc, enable the “Disc at Once” option before writing to the disc. LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders on the disc.
190 UNDERSTANDING YOUR INSTRUMENT PANEL Pressing the AUX button will change the mode to auxiliary device if the AUX jack is connected. NOTE: The AUX device must be turned on and the device’s volume set to the proper level. If the AUX audio is not loud enough, turn the device’s volume up. If the AUX audio sounds distorted, turn the device’s volume down. SEEK Button (Auxiliary Mode) No function. SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No function.
UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Hands-Free Phone (UConnectt) (If Equipped) Refer to “Hands-Free Communication (UConnectt)” in Section 3. Operating Instructions - Satellite Radio Mode (If Equipped) Refer to “Satellite Radio” in this section. Dolbyt Manufactured under license from Dolbyt Laboratories. 9Dolbyt9 and the double-D symbol are trademarks of Dolbyt Laboratories. Macrovision This product incorporates copyright protection technology that is protected by U.S.
192 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If your vehicle is not equipped with UConnectt, the unit will respond with a “Not Equipped With UConnectt” message when selecting controls related to this feature. A 6.5 in (16.5 cm) touch screen allows easy menu selection, while the Advanced Voice Dialog System recognizes more than 1,000 words for audio, navigation, entertainment, and hands-free mobile phone use.
UNDERSTANDING YOUR INSTRUMENT PANEL Clock Setting Procedure The GPS receiver in this system is synchronized to the time data being transmitted by the GPS satellites. The satellites’ clock is Greenwich Mean Time (GMT). This is the worldwide standard for time. This makes the system’s clock very accurate once the appropriate time zone and daylight savings information is set. Changing the Time Zone 1. Turn on the multimedia system. 2. Touch the screen where the time is displayed.
194 UNDERSTANDING YOUR INSTRUMENT PANEL 3. When this feature is on, a check mark will appear in the box next to the words “Daylight Savings.” Touch the screen where the words “Daylight Savings” are displayed to change the current setting. Setting the User Clock If you wish to set the clock to a time different from the system clock, you can manually adjust the time by performing the following: 1. Turn on the multimedia system. 2. Touch the screen where the time is displayed.
UNDERSTANDING YOUR INSTRUMENT PANEL 2. Touch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. When this feature is on, a check mark will appear in the box next to the words “Show Time if Radio is Off.” Touch the screen where the words “Show Time if Radio is Off” are displayed to change the current setting.
196 UNDERSTANDING YOUR INSTRUMENT PANEL To access the ESN/SID, refer to the following steps: ESN/SID Access With REQ/RES Radios With the ignition switch in the ON/RUN or ACC position and the radio on, press the SETUP button and scroll using the Tune/Scroll control knob until Sirius ID is selected. Press the Tune/Scroll control knob and the Sirius ID number will display. The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen.
UNDERSTANDING YOUR INSTRUMENT PANEL Reception Quality Satellite reception may be interrupted due to one of the following reasons: • The vehicle is parked in an underground parking structure or under a physical obstacle. • Dense tree coverage may interrupt reception in the form of short audio mutes. • Driving under wide bridges or along tall buildings can cause intermittent reception. • Placing objects over or too close to the antenna can cause signal blockage.
198 UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button — REU Radio Pressing the INFO button will display information about Artist, Song Title, and Composer (if available). Pressing the INFO button again will close the INFO screen. RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next channel in the direction of the arrows. TUNE Control (Rotary) Turn the rotary Tune/Scroll control knob clockwise to increase or counterclockwise to decrease the channel.
UNDERSTANDING YOUR INSTRUMENT PANEL SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number. This number is used to activate, deactivate, or change the Sirius subscription. SET Button – To Set the Pushbutton Memory When you are receiving a channel that you wish to commit to pushbutton memory, press the SET button. The symbol SET 1 will now show in the display window.
200 UNDERSTANDING YOUR INSTRUMENT PANEL KICKERT HIGH PERFORMANCE SOUND SYSTEM WITH DRIVER-SELECTABLE SURROUND (DSS) – IF EQUIPPED Your vehicle is equipped with a state of the art audio amplifier that provides 5.1-channel surround sound from any stereo audio source. A new feature of the Kickert audio system offers the ability to choose surround sound for any audio source. “Audio Surround” is optimized for front seat passengers for any audio source.
UNDERSTANDING YOUR INSTRUMENT PANEL REMOTE SOUND SYSTEM CONTROLS The remote sound system controls are located on the surface of the steering wheel at the 3 and 9 o’clock positions. Vehicles equipped with steering wheel-mounted buttons are also equipped with the Electronic Vehicle Information Center (EVIC). The EVIC features a driver-interactive display. This is located in the instrument cluster below the speedometer. VOLUME Button The VOLUME button controls the sound level of the sound system.
202 UNDERSTANDING YOUR INSTRUMENT PANEL SCROLL Button When the EVIC is in the Compass/Temp/ Audio screen, press the SCROLL button to seek up and down radio stations, tracks, chapters, files, etc., depending on which radio is in the vehicle. CD/DVD DISC MAINTENANCE To keep the CD/DVD discs in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3.
UNDERSTANDING YOUR INSTRUMENT PANEL CLIMATE CONTROLS Manual Air Conditioning and Heating System 203 Blower Control Use this control to regulate the amount of air forced through the ventilation system in any mode. The blower speed increases as you move the control to the right from the “O” (Off) position. There are four blower speeds. NOTE: For vehicles equipped with Remote Start, the climate controls will not function during Remote Start operation if the blower control is left in the “O” (Off) position.
204 UNDERSTANDING YOUR INSTRUMENT PANEL Temperature Control Use this control to regulate the temperature of the air inside the passenger compartment. The blue area of the scale indicates cooler temperatures while the red area indicates warmer temperatures. Mode Control NOTE: If your air conditioning performance seems lower than expected, check the front of the A/C condenser (located in front of the radiator) for an accumulation of dirt or insects.
UNDERSTANDING YOUR INSTRUMENT PANEL 205 NOTE: For all settings except full cold or full hot, there is a difference in temperature between the upper and lower outlets. The warmer air flows to the floor outlets. This feature gives improved comfort during sunny but cool conditions. • Defrost Air is directed through the windshield and side window demist outlets. Use this mode with maximum blower and temperature settings for best windshield and side window defrosting.
206 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • Continuous use of the recirculation mode may make the inside air stuffy and window fogging may occur. Extended use of this mode is not recommended. • The use of the recirculation mode in cold or damp weather may cause windows to fog on the inside, because of moisture build-up inside the vehicle. Select the Outside Air position for maximum defogging. • The A/C will engage automatically to prevent fogging when the recirculation button is pressed.
UNDERSTANDING YOUR INSTRUMENT PANEL Summer Operation The engine cooling system in air-conditioned vehicles must be protected with a high-quality antifreeze coolant to provide proper corrosion protection and to protect against engine overheating. A 50% solution of ethylene glycol antifreeze coolant in water is recommended. Refer to “Maintenance Procedures” in Section 7 of this manual for proper coolant selection.
208 UNDERSTANDING YOUR INSTRUMENT PANEL Outside Air Intake Make sure the air intake, located directly in front of the windshield, is free of obstructions such as leaves. Leaves collected in the air intake may reduce airflow, and if they enter the plenum, they could plug the water drains. In winter months, make sure the air intake is clear of ice, slush, and snow. A/C Air Filter — If Equipped The A/C Air Filter will reduce, but not eliminate, diesel and agricultural smells.
UNDERSTANDING YOUR INSTRUMENT PANEL 209 Control Setting Suggestions for Various Weather Conditions 4
STARTING AND OPERATING CONTENTS m Starting Procedures . . . . . . . . . . . . . . . . . . . . . 214 m Automatic Transmission . . . . . . . . . . . . . . . . . . 220 ▫ Automatic Transmission . . . . . . . . . . . . . . . . 215 ▫ General Information . . . . . . . . . . . . . . . . . . . 220 ▫ Keyless Go . . . . . . . . . . . . . . . . . . . . . . . . . . 216 ▫ Brake/Transmission Shift Interlock System . . . 222 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . .
212 STARTING AND OPERATING ▫ Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 m Driving Through Water . . . . . . . . . . . . . . . . . . 230 ▫ Flowing/Rising Water . . . . . . . . . . . . . . . . . . 230 m Parking Brake . . . . . . . . . . . . . . . . . . . . . . . . . 232 m Brake System . . . . . . . . . . . . . . . . . . . . . . . . . . 234 ▫ Anti-Lock Brake System (ABS) . . . . . . . . . . . . 235 m Power Steering . . . . . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING 213 m Tire Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . 261 ▫ Fuel System Cautions . . . . . . . . . . . . . . . . . . 272 m Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . 262 ▫ Carbon Monoxide Warnings . . . . . . . . . . . . . . 273 m Tire Rotation Recommendations . . . . . . . . . . . . 262 m Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 274 ▫ Tire Rotation — Standard Tires . . . . . . . . . . . .
214 STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the key in the ignition.
STARTING AND OPERATING Automatic Transmission The shift lever must be in the NEUTRAL or PARK position before you can start the engine. Apply the brakes before shifting into any driving gear. 215 CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
216 STARTING AND OPERATING Keyless Go This function allows the driver to operate the ignition switch with the push of a button, as long as the ENGINE START/STOP button is installed and the Keyless Go ignition key (FOBIK) is in the passenger compartment. Installing And Removing The Engine Start/Stop Button Keyless Go Functions — With Driver’s Foot Off The Brake Pedal (In PARK Position) • Press the ENGINE START/STOP button once to activate the radio, wipers, and windows.
NOTICE: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
STARTING AND OPERATING 217 Normal Starting Using Fob With Integrated Key (Tip Start) Using The ENGINE START/STOP Button (Tip Start) NOTE: Normal Starting of either a cold or a warm engine is obtained without pumping or depressing the accelerator pedal. NOTE: Normal Starting of either a cold or a warm engine is obtained without pumping or depressing the accelerator pedal. Press and hold your foot on the brake pedal and then press and release the ENGINE START/STOP button twice.
218 STARTING AND OPERATING If Engine Fails To Start WARNING! • Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury. • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way.
STARTING AND OPERATING Then, turn the ignition switch to the START position and release it as soon as the starter engages. The starter motor will disengage automatically in 10 seconds. Once this occurs, release the accelerator pedal, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the normal starting procedure. CAUTION! To prevent damage to the starter, wait 10 to 15 seconds before trying again.
220 STARTING AND OPERATING AUTOMATIC TRANSMISSION CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. WARNING! It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed.
STARTING AND OPERATING • Shift lever position • Accelerator position • Vehicle speed The gear shifting process is continuously adapted, dependent on the driving style, the driving situation, and the road characteristics. NOTE: • After selecting any driving position, wait a moment to allow the gear to engage fully before accelerating, especially when the engine is cold. • If there is a need to restart the engine, be sure to cycle the key to the LOCK position before restarting.
222 STARTING AND OPERATING WARNING! Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should always shift the transmission into PARK, remove the key from the ignition, and apply the parking brake. Once the key is removed from the ignition, the transmission shift lever is locked in the PARK position, securing the vehicle against unwanted movement.
STARTING AND OPERATING 223 5-Speed Automatic Transmission Shifting from DRIVE to PARK or REVERSE should be done only after the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when moving the shift lever between these gears. 5 Brake Interlock Override To activate the override, first insert the key into the ignition switch and turn it to the ACC or ON position.
224 STARTING AND OPERATING Gear Ranges PARK PARK supplements the parking brake by locking the transmission. The engine can be started in this range. Never use PARK while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. When parking on a flat surface, place the shift lever in the PARK position first, and then apply the parking brake.
STARTING AND OPERATING 225 CAUTION! CAUTION! Damage to the shifter could result if the shift lever is moved out of PARK before the ignition is turned from the LOCK to ON position. Coasting the vehicle or driving for any other reason with the shift lever in NEUTRAL can result in transmission damage. REVERSE Shift into REVERSE gear only when the vehicle is completely stopped. NEUTRAL In NEUTRAL, no power is transmitted from the engine to the drive axle.
226 STARTING AND OPERATING DRIVE This range should be used for most city and highway driving. It provides the smoothest upshifts and downshifts and the best fuel economy. The transmission automatically upshifts through 5th gear. The DRIVE position provides optimum driving characteristics under all normal operating conditions.
STARTING AND OPERATING A reset feature is available to allow the vehicle to be driven to an authorized dealer for service. To reset the transmission, use the following procedure: 1. Stop the vehicle. 2. Move the shift lever to the PARK position. 3. Turn OFF the engine. 4. Wait approximately 10 seconds. 5. Restart the engine. 6. Move the shift lever to the desired range. If the problem is no longer detected, the transmission will return to normal operation.
228 STARTING AND OPERATING AUTOSTICKT Autostickt is a driver-interactive transmission that offers manual gear shifting to provide you with more control of the vehicle. Autostickt allows you to maximize engine braking, eliminate undesirable upshifts and downshifts, and improve overall vehicle performance. This system can also provide you with more control during passing, city driving, cold slippery conditions, mountain driving, trailer towing, and many other situations.
STARTING AND OPERATING one second. The transmission will now operate automatically, shifting between the five available gears. AutostickT General Information • You can start out in 1st or 2nd gear. The system will ignore attempts to upshift at too low of a vehicle speed. • The transmission will automatically downshift to 1st gear when coming to a stop. • Starting out in 2nd gear is helpful in snowy or icy conditions. • Avoid using speed control when Autostickt is engaged.
230 STARTING AND OPERATING Traction When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and road surface. This is known as hydroplaning and may cause partial or complete loss of vehicle control and stopping ability. To reduce this possibility, the following precautions should be observed: 1. Slow down during rainstorms or when the roads are slushy. 2. Slow down if the road has standing water or puddles. 3.
STARTING AND OPERATING Shallow Standing Water Although your vehicle is capable of driving through shallow standing water, consider the following Caution and Warning before doing so. CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle.
232 STARTING AND OPERATING WARNING! • Driving through standing water limits your vehicle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water. • Driving through standing water limits your vehicle’s braking capabilities, which increases stopping distances. Therefore, after driving through standing water, drive slowly and lightly press on the brake pedal several times to dry the brakes.
STARTING AND OPERATING 233 When parking on a hill, it is important to apply the parking brake before placing the shift lever in PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of PARK. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. The foot operated parking brake is positioned below the lower left corner of the instrument panel.
234 STARTING AND OPERATING WARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the key in the ignition. A child could operate power windows, other controls, or move the vehicle. • Be sure the parking brake is fully disengaged before driving; failure to do so can lead to brake failure and an accident.
STARTING AND OPERATING 235 Anti-Lock Brake System (ABS) The Anti-Lock Brake System (ABS) provides increased vehicle stability and brake performance under most braking conditions. The system automatically “pumps” the brakes during severe braking conditions to prevent wheel lock-up. ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can include ice, snow, gravel, bumps, railroad tracks, loose debris, or panic stops.
236 STARTING AND OPERATING WARNING! • • • • • The Anti-Lock Brake System (ABS) contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capability. Installation of such equipment should be performed by qualified professionals. Pumping of the Anti-Lock Brakes will diminish their effectiveness and may lead to an accident.
STARTING AND OPERATING If both the Brake Warning Light and the ABS Light remain on, the ABS and EBD systems are not functioning. Immediate repair to the ABS system is required. POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible to steer your vehicle.
238 STARTING AND OPERATING ELECTRONIC BRAKE CONTROL SYSTEM Your vehicle is equipped with an advanced electronic brake control system commonly referred to as ESP. This system includes the ABS (Anti-Lock Brake System), the TCS (Traction Control System), the BAS (Brake Assist System), and the ESP (Electronic Stability Program). These systems work together to enhance both vehicle stability and control in various driving conditions.
STARTING AND OPERATING TCS (Traction Control System) This system monitors the amount of wheel spin of each driven wheel. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability. BAS (Brake Assist System) This system complements the ABS by optimizing the vehicle braking capability during emergency braking maneuvers.
240 STARTING AND OPERATING ESP (Electronic Stability Program) This system enhances directional control and stability of the vehicle under various driving conditions. The ESP corrects for oversteering and understeering the vehicle by applying the brake of the appropriate wheel. Engine power may also be reduced to assist in counteracting the condition of oversteer or understeer and help the vehicle maintain the desired path.
STARTING AND OPERATING WARNING! The ESP cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The ESP cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents.
242 STARTING AND OPERATING The ESP OFF switch is located in the switch bank near the bottom center of the instrument panel. To enter the “Partial Off” mode, momentarily depress the ESP OFF switch and the ESP/TCS Indicator Light will illuminate. To turn the ESP ON again, momentarily depress the ESP OFF switch and the ESP/TCS Indicator Light will turn off.
STARTING AND OPERATING this message. The “ESP OFF” message may appear in the Electronic Vehicle Information Center (EVIC). Refer to “Electronic Vehicle Information Center (EVIC)” in Section 4. To turn ESP ON again, momentarily depress the ESP OFF switch. NOTE: The 9ESP OFF9 message will display and the audible chime will sound when the shift lever is moved into the PARK position from any position other than PARK and then moved out of the PARK position.
244 STARTING AND OPERATING WARNING! With the ESP switched OFF, the enhanced vehicle stability offered by ESP is unavailable. In an emergency evasive maneuver, the ESP system will not engage to assist in maintaining stability. The “Full Off” ESP mode is intended for off-highway or off-road only. Synchronizing ESP The Malfunction Indicator Light for the ESP is combined with BAS indicator.
STARTING AND OPERATING NOTE: • The ESP/TCS Indicator Light and the ESP/BAS Malfunction Indicator Light will turn on momentarily each time the ignition switch is turned ON. 245 TIRE SAFETY INFORMATION Tire Markings • Each time the ignition is turned ON, the ESP System will be ON even if it was turned OFF previously. • The ESP Control System will make buzzing or clicking sounds when it is active.
246 STARTING AND OPERATING NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H. • Temporary spare tires are high-pressure compact spares designed for temporary emergency use only. Tires designed to this standard have the letter “T” molded into the sidewall preceding the size designation. Example: T145/80D18 103M.
STARTING AND OPERATING 247 Tire Sizing Chart TIRE SIZING TERMS Size Designation: P = Passenger Car tire size based on U.S. design standards (....blank....( = Passenger Car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = Aspect ratio in percent (%) — Ratio of section height to section width of tire 10.
248 STARTING AND OPERATING TIRE SIZING TERMS Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, 249 located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
250 STARTING AND OPERATING Tire Loading and Tire Pressure Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side B-Pillar.
STARTING AND OPERATING 251 Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading Information placard and in the “Vehicle Loading” section of this manual.
252 STARTING AND OPERATING 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.
STARTING AND OPERATING 253 5
254 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. 1. Safety— WARNING! • Improperly inflated tires are dangerous and can cause accidents. • Under-inflation increases tire flexing and can result in tire failure. TIRES — GENERAL INFORMATION • Over-inflation reduces a tire’s ability to cushion shock.
STARTING AND OPERATING 255 2. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement. Under-inflation also increases tire rolling resistance and results in higher fuel consumption. 3. Ride Comfort and Vehicle Stability— Proper tire inflation contributes to a comfortable ride. Over-inflation produces a jarring and uncomfortable ride.
256 STARTING AND OPERATING CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressure.” Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mi (1 km) after a three hour period.
STARTING AND OPERATING Tire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and reduced vehicle loading may be required for high-speed vehicle operation.
258 STARTING AND OPERATING Tire Spinning When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels above 35 mph (55 km/h). Refer to the paragraph on “Freeing A Stuck Vehicle” in Section 6. Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause tire damage or failure.
STARTING AND OPERATING These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced. Many states have laws requiring tire replacement at this point.
260 STARTING AND OPERATING Replacement Tires The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure. The manufacturer strongly recommends that you use tires equivalent to the originals in size, quality and performance when replacement is needed. (Refer to the paragraph on “Tread Wear Indicators”). Refer to the “Tire and Loading Information” placard for the size designation of your tire.
STARTING AND OPERATING CAUTION! Replacing original tires with tires of a different size may result in false speedometer and odometer readings. Alignment And Balance Poor suspension alignment may result in: • Fast tire wear. • Uneven tire wear, such as feathering and one-sided wear. • Vehicle pull to right or left. Tires may also cause the vehicle to pull to the left or right. Alignment will not correct this condition. See your authorized dealer for proper diagnosis.
262 STARTING AND OPERATING SNOW TIRES Some areas of the country require the use of snow tires during the winter. Standard tires are of the all season type and satisfy this requirement as indicated by the M+S designation on the tire sidewall. If you need snow tires, select tires equivalent in size and type to the original equipment tires. Use snow tires only in sets of four. Failure to do so may adversely affect the safety and handling of your vehicle.
STARTING AND OPERATING Tire Rotation — Standard Tires The suggested rotation method for vehicles equipped with all season tires is the “forward-cross” as shown in the following diagram. 263 Tire Rotation — Optional Tires The suggested rotation method is the “side-to-side” as shown in the following diagram. This method is required due to different size tires on the front and rear of the vehicle.
264 STARTING AND OPERATING TIRE PRESSURE MONITOR SYSTEM (TPMS) • The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure. • The tire pressure will vary with temperature by about 1 psi (6.9 kPa) for every 12°F (6.5°C). This means that when the outside temperature decreases, the tire pressure will decrease. Tire pressure should always be set based on cold inflation tire pressure.
STARTING AND OPERATING pressures. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. − For example, your vehicle may have a recommended cold (parked for more than three hours) placard pressure of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tire pressure is 27 psi (186 kPa), a temperature drop to 20°F (-7°C) will decrease the tire pressure to approximately 26 psi (179 kPa).
266 STARTING AND OPERATING NOTE: • The TPMS is not intended to replace normal tire care and maintenance or to provide warning of a tire failure or condition. • The TPMS should not be used as a tire pressure gauge while adjusting your tire pressure. • Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.
STARTING AND OPERATING • CORAX Receiver module, • Various TPMS messages, which display in the Electronic Vehicle Information Center (EVIC), and 267 Front, Right Rear) for three seconds and a graphic showing the pressure values of each tire with the low tire pressure values flashing. • TPM Telltale Light The matching full size spare wheel and tire assembly (if equipped) has a TPM sensor. The full size spare can be used in place of any of the four road tires.
268 STARTING AND OPERATING Should this occur, you should stop as soon as possible and inflate the tires with low pressure (those flashing in the EVIC graphic) to the vehicle’s recommended cold placard pressure value. Once the system receives the updated tire pressures, the system will automatically update, the graphic display in the EVIC will stop flashing, and the TPM Telltale Light will turn off.
STARTING AND OPERATING If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the TPM Telltale Light will no longer flash, and the 9CHECK TPM SYSTEM9 message will no longer display, and a pressure value will display in place of the dashes. A system fault can occur due to any of the following: 1. Signal interference due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPM sensors.
270 STARTING AND OPERATING FUEL REQUIREMENTS 6.1L Engine The 6.1L engine is designed to meet all emissions regulations and provide excellent fuel economy and performance when using high-quality premium unleaded gasoline with an octane rating of 91 or higher. Light spark knock at low engine speeds is not harmful to your engine. However, continued heavy spark knock at high speeds can cause damage and immediate service is required.
STARTING AND OPERATING Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as 10% ethanol, MTBE, and ETBE. Oxygenates are required in some areas of the country during the winter months to reduce carbon monoxide emissions. Fuels blended with these oxygenates may be used in your vehicle. CAUTION! DO NOT use gasolines containing Methanol or E85 Ethanol. Use of these blends may result in starting and driveability problems and may damage critical fuel system components.
272 STARTING AND OPERATING Materials Added to Fuel All gasoline sold in the United States is required to contain effective detergent additives. Use of additional detergents or other additives is not needed under normal conditions and they would result in additional cost. Therefore, you should not have to add anything to the fuel. Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law.
STARTING AND OPERATING Carbon Monoxide Warnings WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
274 STARTING AND OPERATING ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is located behind the fuel filler door on the left side of the vehicle. Use a finger to pull open the door. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle. NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler door.
STARTING AND OPERATING WARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel to the vehicle when the engine is running. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling. NOTE: • Tighten the gas cap until you hear a “clicking” sound. This is an indication that the gas cap is tightened properly.
276 STARTING AND OPERATING VEHICLE LOADING The load carrying capacity of your vehicle is shown on the “Vehicle Certification Label.” This information should be used for passenger and luggage loading as indicated. Do not exceed the specified Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). Vehicle Certification Label Your vehicle has a Vehicle Certification Label affixed to the rear of the driver’s door.
STARTING AND OPERATING WARNING! Because the front wheels steer the vehicle, it is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded. You could lose control of the vehicle and have an accident. Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and the front and rear GAWR.
278 STARTING AND OPERATING NOTE: Refer to the “Vehicle Certification Label” affixed to the rear of the driver’s door for your vehicle’s GVWR and GAWRs. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Recreational towing for this vehicle is not recommended. TRAILER TOWING Trailer towing with this vehicle is not recommended. NOTE: If the vehicle requires towing, make sure all four wheels are off the ground.
WHAT TO DO IN EMERGENCIES CONTENTS m Hazard Warning Flasher . . . . . . . . . . . . . . . . . . 280 ▫ Without The Ignition Key . . . . . . . . . . . . . . . 291 m If Your Engine Overheats . . . . . . . . . . . . . . . . . 280 ▫ Towing This Vehicle Behind Another Vehicle (Flat Towing With All Four Wheels On The Ground) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291 m TIREFIT Tire Repair . . . . . . . . . . . . . . . . . . . . . 281 m Jump Starting . . . . . . . . . . . . . . . . . . . . . .
280 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER The hazard warning switch is located in the switch bank near the bottom center of the instrument panel. Depress the switch to activate the flashers. When activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. Push the switch a second time to turn off the flashers. This is an emergency warning system and it should not be used when the vehicle is in motion.
WHAT TO DO IN EMERGENCIES NOTE: There are steps that you can take to slow down an impending overheat condition. If your air conditioner is on, turn it off. The air conditioning system adds heat to the engine cooling system and turning off the A/C removes this heat. You can also turn the Temperature control to maximum heat, the Mode control to floor, and the Fan control to HI. This allows the heater core to act as a supplement to the radiator and aids in removing heat from the engine cooling system.
282 WHAT TO DO IN EMERGENCIES The TIREFIT system is located under an access panel in the trunk. Tire Fit Kit TIREFIT Location 1. Air pump hose 2. Power plug and cable 3. AIR PUMP switch 4. Pressure gauge 5. TIREFIT sealant bottle 6.
WHAT TO DO IN EMERGENCIES WARNING! • • • • • Do not attempt to repair a tire on the side of the vehicle close to traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or repairing a tire. Cuts or punctures larger than approximately 0.16 in (4 mm), tire damage caused by driving with extremely low tire pressure or on a flat tire, or a damaged wheel can pose a hazard while driving. TIREFIT should not be used in such circumstances.
284 WHAT TO DO IN EMERGENCIES 9. Press the switch 3 on the air pump to I (ON). The air pump should start to inflate the tire and the tire sealant (white fluid) will flow from the sealant bottle 5 through the TIREFIT sealant hose 6 and into the tire. 10. Allow the air pump to run for five minutes and then read the pressure gauge 4. If the tire inflates to 26 psi (1.8 bar) or greater, proceed to Step 19 of this procedure. If not, proceed to the following step. 11. Press the AIR PUMP switch 3 to 0 (OFF).
WHAT TO DO IN EMERGENCIES 20. Release the parking brake and drive the vehicle for approximately 10 minutes to ensure optimum distribution of the tire sealant within the tire. 21. Turn on the hazard warning flashers. 22. Move the shift lever to the PARK position, turn OFF the engine, and set the parking brake. 23. Disconnect the air pump hose 1 from the underside of the sealant bottle 5 by flipping the hose valve open. 24. Connect the air pump hose valve to the tire valve and flip the hose valve closed. 25.
286 WHAT TO DO IN EMERGENCIES NOTE: • If a pressure of at least 19 psi (1.3 bar) cannot be maintained in the tire, the tire is too badly damaged. Do not attempt to drive the vehicle further. Call for assistance. • Do not operate the electric air pump for more than eight minutes to avoid overheating. The air pump may be used again once it has cooled down. • Replace the TIREFIT sealant bottle 5 once every four years to assure optimum operation of the system.
WHAT TO DO IN EMERGENCIES 287 NOTE: The battery is stored under an access cover in the trunk. Remote battery terminals are located in the engine compartment for jump-starting. 3. Set the parking brake, place the automatic transmission in PARK, and turn the ignition switch to the LOCK position on both vehicles. 1. Wear eye protection and remove any metal jewelry such as watchbands or bracelets that might make an inadvertent electrical contact. 4.
288 WHAT TO DO IN EMERGENCIES 6. Connect the other cable, first to the negative terminal of the booster battery and then to the engine ground (-) of the vehicle with the discharged battery. Make sure you have a good contact on the engine ground. Refer to the following illustration for jump-starting connections. 7. Start the engine in the vehicle that has the booster battery. Let the engine idle a few minutes. Then, start the engine in the vehicle with the discharged battery.
WHAT TO DO IN EMERGENCIES WARNING! • You should not try to start your vehicle by pushing or towing. • Do not connect the cable to the negative post of the discharged battery. The resulting electrical spark could cause the battery to explode. • During cold weather when temperatures are below the freezing point, electrolyte in a discharged battery may freeze. Do not attempt jump-starting because the battery could rupture or explode.
290 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! • When “rocking” a stuck vehicle by moving between “1st” and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause tire damage or failure. A tire could explode and injure someone.
WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE Without The Ignition Key Special care must be taken when the vehicle is towed with the ignition in the LOCK position. The only approved method of towing without the ignition key is with a flat-bed truck. Proper towing equipment is necessary to prevent damage to the vehicle.
292 WHAT TO DO IN EMERGENCIES CAUTION! • Do not attempt to tow this vehicle from the front with sling type towing equipment. Damage to the front fascia will result. • If the transmission is not operative or if the vehicle is to be towed more than 30 mi (48 km), then the only approved method of towing is with a flat-bed truck. Damage to the transmission may result. • Do not tow the vehicle from the rear. Damage to the rear sheet metal and fascia will occur.
MAINTAINING YOUR VEHICLE CONTENTS m Engine Compartment — 6.1L . . . . . . . . . . . . . . 296 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . . 303 m Onboard Diagnostic System — OBD II . . . . . . . . 297 ▫ Drive Belts — Check Condition And Tension . . . 303 ▫ Loose Fuel Filler Cap . . . . . . . . . . . . . . . . . . 297 ▫ Spark Plugs . . . . . . . . . . . . . . . . . . . . . . . . . 304 m Emissions Inspection And Maintenance Programs . . . . . . . . . . . . . . . . . . . . . . . . . . .
294 MAINTAINING YOUR VEHICLE ▫ Power Steering — Fluid Check . . . . . . . . . . . . 310 ▫ Front And Rear Suspension Ball Joints . . . . . . 311 ▫ Steering Linkage . . . . . . . . . . . . . . . . . . . . . . 311 ▫ Body Lubrication . . . . . . . . . . . . . . . . . . . . . 311 ▫ Windshield Wiper Blades . . . . . . . . . . . . . . . . 312 ▫ Windshield Washers . . . . . . . . . . . . . . . . . . . 312 ▫ Exhaust System . . . . . . . . . . . . . . . . . . . . . . 313 ▫ Cooling System . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 295 ▫ Center Tail/Backup Light . . . . . . . . . . . . . . . 340 m Fluids, Lubricants, And Genuine Parts . . . . . . . . 342 ▫ Center High-Mounted Stop Light (CHMSL) . . . 340 ▫ Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342 ▫ License Light . . . . . . . . . . . . . . . . . . . . . . . . 340 ▫ Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343 m Fluid Capacities . . . . . . . . . . . . . . . . . . . . . . . .
296 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 6.
MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
298 MAINTAINING YOUR VEHICLE Trip Odometer button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. serviced, recently had a dead battery, or a battery replacement. If the OBD II system should be determined not ready for the I/M test, the vehicle may fail the test. A loose, improperly installed, or damaged fuel filler cap may also turn on the MIL.
MAINTAINING YOUR VEHICLE 5. Approximately 15 seconds later, one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition key or start the engine. This means that the vehicle’s OBD II system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all and will remain fully illuminated until you turn OFF the ignition key or start the engine.
300 MAINTAINING YOUR VEHICLE DEALER SERVICE Your authorized dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner. Service manuals are available which include detailed service information for your vehicle. Refer to these service manuals before attempting any procedure yourself. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you.
MAINTAINING YOUR VEHICLE Engine Oil Checking Oil Level To assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The best time to check the engine oil level is about five minutes after a fully warmed engine is shut off or before starting the engine after it has sat overnight. Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level readings.
302 MAINTAINING YOUR VEHICLE Engine Oil Selection For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SM or SM/CF, and meet the requirements of Chrysler Material Standard MS-10725. The manufacturer recommends the use of a full synthetic engine oil, such as Mobil 1t SAE 0W-40 or equivalent.
MAINTAINING YOUR VEHICLE Materials Added to Engine Oil The manufacturer strongly recommends against the addition of any additives (other than leak detection dyes) to the engine oil. Engine oil is an engineered product and its performance may be impaired by supplemental additives. Disposing of Used Engine Oil and Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can present a problem to the environment.
304 MAINTAINING YOUR VEHICLE Spark Plugs Spark plugs must fire properly to assure engine performance and emissions control. New plugs should be installed at the specified mileage. The entire set should be replaced if there is any malfunction due to a faulty spark plug. Malfunctioning spark plugs can damage the catalytic converter. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the proper type of spark plug for use in your vehicle.
MAINTAINING YOUR VEHICLE Catalytic Converter The catalytic converter requires the use of unleaded fuel only. Leaded gasoline will destroy the effectiveness of the catalyst as an emissions control device. Under normal operating conditions, the catalytic converter will not require maintenance. However, it is important to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage.
306 MAINTAINING YOUR VEHICLE WARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn. In unusual situations involving grossly malfunctioning engine operation, a scorching odor may indicate severe and abnormal catalyst overheating.
MAINTAINING YOUR VEHICLE 307 Maintenance-Free Battery The top of the maintenance-free battery is permanently sealed. You will never have to add water, nor is periodic maintenance required. NOTE: The battery is stored under an access cover in the trunk. Remote battery terminals are located in the engine compartment for jump starting (Refer to Jump Starting in Section 6 of this manual).
308 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and identified on the battery case. Cable clamps should be tight on the terminal posts and free of corrosion. or even blind you.
MAINTAINING YOUR VEHICLE Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. 309 WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air conditioning system.
310 MAINTAINING YOUR VEHICLE Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by authorized dealers or other service facilities using recovery and recycling equipment.
MAINTAINING YOUR VEHICLE WARNING! Fluid level should be checked on a level surface and with the engine OFF to prevent injury from moving parts and to ensure accurate fluid level reading. Do not overfill. Use only manufacturer’s recommended power steering fluid. If necessary, add fluid to restore to the proper indicated level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type.
312 MAINTAINING YOUR VEHICLE The external lock cylinders should be lubricated twice a year, preferably in the Fall and Spring. Apply a small amount of a high quality lubricant such as MOPARt Lock Cylinder Lubricant or equivalent directly into the lock cylinder. Windshield Wiper Blades The rubber edges of the wiper blades and the windshield should be cleaned periodically with a sponge or soft cloth and a mild nonabrasive cleaner. This will remove accumulations of salt or road film.
MAINTAINING YOUR VEHICLE WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system.
314 MAINTAINING YOUR VEHICLE Cooling System WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the LOCK position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position. • You or others can be badly burned by hot coolant or steam from your radiator. If you see or hear steam coming from under the hood, don’t open the hood until the radiator has had time to cool.
MAINTAINING YOUR VEHICLE drain from the coolant recovery bottle. DO NOT REMOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT. Cooling System — Drain, Flush, and Refill The system should be drained, flushed, and refilled at the intervals shown in the Maintenance Schedule in Section 8. If the solution is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals.
316 MAINTAINING YOUR VEHICLE Adding Coolant Your vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to five years or 100,000 mi (160 000 km) before replacement. To prevent reducing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle. Please review these recommendations for using Hybrid Organic Additive Technology (HOAT) coolant.
MAINTAINING YOUR VEHICLE The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces. WARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system.
318 MAINTAINING YOUR VEHICLE service attendant of this. As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month. When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points to Remember NOTE: When the vehicle is stopped after a few miles (kilometers) of operation, you may observe vapor coming from the front of the engine compartment.
MAINTAINING YOUR VEHICLE • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean, also. • Do not change the thermostat for Summer or Winter operation. If replacement is ever necessary, install ONLY the correct type thermostat. Other designs may result in unsatisfactory coolant performance, poor gas mileage, and increased emissions.
320 MAINTAINING YOUR VEHICLE Care should be taken with installing quick connect fittings to ensure they are properly installed and fully connected. See your authorized dealer for service. Brake System In order to assure brake system performance, all brake system components should be inspected periodically. Suggested service intervals can be found in the Maintenance Schedule in Section 8. WARNING! Riding the brakes can lead to brake failure and possibly an accident.
MAINTAINING YOUR VEHICLE 321 necessarily an indication of leakage. Actual dripping of hot fluid when systems are under pressure (during vehicle operation), should be noted before a hose is replaced based on leakage. Master Cylinder - Brake Fluid Level Check Check the fluid level in the master cylinder immediately if the brake system warning light indicates system failure. • Inspect the brake hoses whenever the brake system is serviced and at every engine oil change.
322 MAINTAINING YOUR VEHICLE Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type. WARNING! • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. • Use of a brake fluid that may have a lower initial boiling point, or is unidentified as to specification, may result in sudden brake failure during hard prolonged braking.
MAINTAINING YOUR VEHICLE CAUTION! • Using a transmission fluid other than the manufacturer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than that recommended by the manufacturer will result in more frequent fluid and filter changes. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type.
324 MAINTAINING YOUR VEHICLE Special Additives Automatic Transmission Fluid (ATF) is an engineered product and its performance may be impaired by supplemental additives. Therefore, do not add any fluid additives to the transmission. The only exception to this policy is the use of special dyes to aid in detecting fluid leaks. In addition, avoid using transmission sealers as they may adversely affect seals. Front And Rear Wheel Bearings Front and rear wheel bearings are permanently sealed.
MAINTAINING YOUR VEHICLE • Salt in the air near seacoast localities. • Atmospheric fallout/industrial pollutants. Washing 325 CAUTION! Do not use abrasive or strong cleaning materials such as steel wool or scouring powder that will scratch metal and painted surfaces. • Wash your vehicle regularly. Always wash your vehicle in the shade using MOPARt Car Wash or a mild car wash soap, and rinse the panels completely with clear water.
326 MAINTAINING YOUR VEHICLE • If your vehicle is damaged due to an accident or similar cause that destroys the paint and protective coating, have your vehicle repaired as soon as possible. The cost of such repairs is considered the responsibility of the owner. • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well packaged and sealed. • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel.
MAINTAINING YOUR VEHICLE Your leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth and MOPARt Total Clean or equivalent. Care should be taken to avoid soaking your leather upholstery with any liquid.
328 MAINTAINING YOUR VEHICLE quarter window equipped with the radio antenna. Do not use scrapers or other sharp instruments that may scratch the elements. When cleaning the rear view mirror, spray cleaner on the towel or rag that you are using. Do not spray cleaner directly on the mirror. Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. 1.
MAINTAINING YOUR VEHICLE FUSES 329 CAUTION! Integrated Power Module (IPM) The Integrated Power Module (IPM) is located in the engine compartment. This module contains fuses and relays. • When installing the integrated power module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the integrated power module and possibly result in an electrical system failure.
330 MAINTAINING YOUR VEHICLE Cavity 1 2 3 4 5 6 7 8 9 10 Cartridge MiniFuse Fuse — 15 Amp Blue — 25 Amp Neutral — 25 Amp Neutral — 25 Amp Neutral — — — 25 Amp Neutral — — — 25 Amp Neutral — — 30 Amp — Pink Description Cavity Washer Motor 11 Powertrain Control Module (PCM) Ignition Run/Start 12 EGR Solenoid/Alternator 14 15 — Ignition Coils/Injectors — Starter — Windshield Wiper 13 16 17 18 19 20 21 22 Cartridge Fuse 30 Amp Pink 40 Amp Green 50 Amp Red — 50 Amp Red — — — — — — — MiniFuse — —
MAINTAINING YOUR VEHICLE 331 Rear Power Distribution Center There is also a power distribution center located in the trunk under the spare tire access panel. This center contains fuses and relays.
332 MAINTAINING YOUR VEHICLE CAUTION! • When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload.
MAINTAINING YOUR VEHICLE Cavity 8 Cartridge MiniFuse Fuse — 15 Amp Blue 9 — 10 11 * 12 * 13 * 14 — — — — — 15 16 — — 20 Amp Yellow — — — — 10 Amp Red — — Description Cavity Diagnostic Link Connector (DLC)/Wireless Control Module (WCM)/ Wireless Ignition Node (WIN) Power Outlet 17 — — — — AC Heater Control/ Cluster/Security Module - if equipped — — 18 19 20 21 22 23 24 25 26 27 Cartridge MiniFuse Fuse — 20 Amp Yellow — 20 Amp Yellow — 10 Amp Red — — — — — — — — — — — — — — — 10 Amp Red 333
334 MAINTAINING YOUR VEHICLE Cavity 28 29 Cartridge MiniFuse Fuse — 10 Amp Red — 5 Amp Orange 30 — 10 Amp Red 31 32 33 34 35 — — — — — — — — — 5 Amp Orange Description Cavity Ignition Run 36 Cluster/Electronic Stability Program (ESP)/ Powertrain Control Module (PCM)/STOP LIGHT Switch Door Modules/Power Mirrors/Steering Control Module (SCM) — — — — Antenna Module - if equipped/Power Mirrors 37 38 Cartridge MiniFuse Fuse — 20 Amp Yellow — 15 Amp Blue — 10 Amp Red 39 — 10 Amp Red 5 Amp Orang
MAINTAINING YOUR VEHICLE Cavity 43 44 Cartridge Fuse 30 Amp Pink 20 Amp Blue MiniFuse — — Description Rear Window Defroster Amplifier - if equipped/ Sunroof - if equipped * Cavities 11, 12, and 13 contain self-resetting fuses (circuit breakers) that are only serviceable by an authorized dealer. The cluster and the driver seat switch are fused by the 25 Amp circuit breaker in cavity 11. The passenger seat switch is fused by the 25 Amp circuit breaker in cavity 12.
336 MAINTAINING YOUR VEHICLE REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Bulb Number Rear Courtesy/Reading Lights. . . . . . . . . . . . . . W5W Rear Compartment (Trunk) Light . . . . . . . . . . . . . 562 Overhead Console Reading Lights. . . . . . . . . . . . . 578 Visor Vanity Lights . . . . . . . . . . . . . . . . . . . . . A6220 Glove Box Light . . . . . . . . . . . . . . . . . . . . . . . . . 194 Door Courtesy . . . . . . . . . . . . . . . . . . . . . . . . . . 562 Shift Indicator Light . . . . .
MAINTAINING YOUR VEHICLE BULB REPLACEMENT Low Beam Headlight, High Beam Headlight, and Park/Turn Light — Models with High Intensity Discharge (HID) Headlights HID Headlights The headlights are a type of high voltage discharge tube. High voltage can remain in the circuit even with the HEADLIGHT switch off and the key removed. Because of this, you should not attempt to service a headlight bulb yourself. If a headlight bulb fails, take your vehicle to an authorized dealer for service.
338 MAINTAINING YOUR VEHICLE Front/Rear Side Marker Light Tail/Turn/Stop Light 1. Remove the front/rear side marker. Use a fiber stick or similar tool to gently pry the light on the outboard side to disengage the clip. 1. Open the trunk. NOTE: • If a screwdriver is used, make sure a soft material is placed between the vehicle body and tool so not to scratch the paint. 2. Rotate the bulb’s socket counterclockwise, and remove the bulb and socket assembly from the housing. 3.
MAINTAINING YOUR VEHICLE 339 3. Remove the fasteners from the back of the tail light assembly. 7. Push the electrical connector locking tab to the side. 4. Pull back the trunk liner. 5. Remove the remaining fasteners from the back of the tail light assembly. 6. Pull the tail light assembly clear from the vehicle to access the bulbs. 8. Disconnect the electrical connector. 9. Turn the appropriate bulb and socket assembly counterclockwise to remove it from the tail light assembly. 10.
340 MAINTAINING YOUR VEHICLE 11. Reinstall the bulb and socket assembly into the tail light assembly, and then turn it clockwise. 3. Disconnect the bulb from the socket assembly and install the replacement bulb. 12. Reinstall the tail light assembly, fasteners, electrical connector, and trunk liner. 13. Close the trunk. Center Tail/Backup Light See your authorized dealer for bulb replacement. Center High-Mounted Stop Light (CHMSL) The CHMSL uses LED lights that are not serviceable separately.
MAINTAINING YOUR VEHICLE 341 FLUID CAPACITIES Fuel (Approximate) Engine Oil with Filter 6.1 Liter Engine (SAE 0W-40) Cooling System * 6.1 Liter Engine (MOPARt Antifreeze/Coolant 5 Year/100,000 Mile Formula) or equivalent * Includes heater and coolant recovery bottle filled to MAX level. U.S. 19 Gallons Metric 72 Liters 7 Quarts 6.6 Liters 15 Quarts 14.
342 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil (6.1L) Oil Filter (6.1L) Spark Plugs (6.1L) Fuel Selection (6.
MAINTAINING YOUR VEHICLE 343 Chassis Component Automatic Transmission Brake Master Cylinder Power Steering Reservoir Rear Axle Fluids, Lubricants, and Genuine Parts MOPARt ATF+4 Automatic Transmission Fluid MOPARt DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids.
MAINTENANCE SCHEDULES CONTENTS m Emission Control System Maintenance . . . . . . . . 346 m Maintenance Schedule . . . . . . . . . . . . . . . . . . . 346 ▫ Required Maintenance Intervals . . . . . . . . . . .
M A I N T E N A N C E 346 MAINTENANCE SCHEDULES EMISSION CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type, must be done at the times or mileages specified to ensure the continued proper functioning of the Emission Control System. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
MAINTENANCE SCHEDULES • Change your engine oil more often if you drive your vehicle for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 mi (10 000 km) or six months, whichever comes first. Your authorized dealer will reset the oil change indicator message after completing the scheduled oil change.
M 348 MAINTENANCE SCHEDULES A I Required Maintenance Intervals N T E N A N Maintenance Items C Change the engine oil and engine oil filter. E S C H E D U L E S 8 Rotate the tires. If using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. Inspect the brake linings, and replace if necessary. Replace the air conditioning filter (if equipped). Inspect the rear axle fluid. Inspect the CV joints.
MAINTENANCE SCHEDULES 349 M Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Replace the engine air cleaner filter. Change the rear axle fluid if using your vehicle for any of the following: police, taxi, fleet, off-road, or frequent trailer towing. Change the automatic transmission fluid and filter if using your vehicle for any of the following: police, taxi, fleet, or frequent trailer towing.
M 350 MAINTENANCE SCHEDULES A I N WARNING! T E You can be badly injured working on or around a N motor vehicle. Do only that service work for which A N you have the knowledge and the right equipment. If C you have any doubt about your ability to perform a E S C H E D U L E S 8 service job, take your vehicle to a competent mechanic.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS m Suggestions For Obtaining Service For Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . 353 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . . 355 ▫ Prepare For The Appointment . . . . . . . . . . . . 353 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . . 355 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . . 353 m Warranty Information (U.S. Vehicles Only) . . . . .
352 IF YOU NEED CONSUMER ASSISTANCE m Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 358 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . . 359 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . . 359 ▫ Temperature Grades . . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager. Keep a maintenance log of your vehicle’s service history. This can often provide a clue to the current problem.
354 IF YOU NEED CONSUMER ASSISTANCE high quality service. The manufacturer’s authorized dealers have the facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed correctly and in a timely manner. • Authorized dealership name This is why you should always talk to an authorized dealer’s service manager first. Most matters can be resolved with this process. Chrysler LLC Customer Center P.O.
IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its Customer Center. Any hearing or speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the manufacturer by dialing 1–800–380–CHRY.
356 IF YOU NEED CONSUMER ASSISTANCE WARNING! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain, or emit, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. WARRANTY INFORMATION (U.S.
IF YOU NEED CONSUMER ASSISTANCE 357 To contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY: 1–800–424– 9153), or go to http://www.safercar.gov; or write to: Administrator, NHTSA, 400 Seventh Street, SW., Washington, D.C. 20590. You can also obtain other information about motor vehicle safety from http://www.safercar.gov. PUBLICATION ORDER FORMS To order the following manuals, you may use either the website or the phone numbers listed below.
358 IF YOU NEED CONSUMER ASSISTANCE • Diagnostic Procedure Manuals Diagnostic Procedure Manuals are filled with diagrams, charts and detailed illustrations. These practical manuals make it easy for students and technicians to find and fix problems on computer-controlled vehicle systems and features. They show exactly how to find and correct problems the first time, using step-bystep troubleshooting and drivability procedures, proven diagnostic tests and a complete list of all tools and equipment.
IF YOU NEED CONSUMER ASSISTANCE Treadwear The Treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded 100.
360 IF YOU NEED CONSUMER ASSISTANCE Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel, than the minimum required by law. WARNING! The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.
INDEX 10
362 INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . 232,234 ABS (Anti-Lock Brake System) . . . . . . . . . . . . 235,238 Adding Engine Coolant (Antifreeze) . . . . . . . . . . 316 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 274 Adding Washer Fluid . . . . . . . . . . . . . . . . . . 124,312 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 272 Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 304 Air Conditioner Maintenance . . . . . . . . . . . .
INDEX Auto Unlock, Doors . . . . . . . . . . . . . . . . . . . . . . . 31 Automatic Dimming Mirror . . . . . . . . . . . . . . . . . 75 Automatic Door Locks . . . . . . . . . . . . . . . . . . . . . 31 Automatic Headlights . . . . . . . . . . . . . . . . . . . . . 117 Automatic Transaxle Special Additives . . . . . . . . . . . . . . . . . . . . . . 324 Automatic Transmission . . . . . . . . . . . . . 223,322,323 Adding Fluid . . . . . . . . . . . . . . . . . . . . . . 323,343 Autostick . . . . . . . . . .
364 INDEX Master Cylinder . . . . . . . . . . . . . . . . . . . . . . . 321 Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232 Warning Light . . . . . . . . . . . . . . . . . . . . . 155,234 Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234,320 Brake/Transmission Interlock . . . . . . . . . . . . . . . 222 Break-In Recommendations, New Vehicle . . . . . . . . 67 Brightness, Interior Lights . . . . . . . . . . . . . . . . . . 121 Bulb Replacement . . . . . . . . . . .
INDEX Cold Weather Operation . . . . . . . . . . . . . . . . . . . 217 Compact Disc (CD) Maintenance . . . . . . . . . . . . . 202 Compass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Compass Calibration . . . . . . . . . . . . . . . . . . . . . 169 Compass Variance . . . . . . . . . . . . . . . . . . . . . . . 170 Computer, Trip/Travel . . . . . . . . . . . . . . . . . . . . 163 Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Console, Floor . . . . . . . . . . .
366 INDEX Diagnostic System, Onboard . . . . . . . . . . . . . . . . 297 Digital Video Disc (DVD) Player . . . . . . . . . . . . . 191 Dimmer Switch, Headlight . . . . . . . . . . . . . . . . . 120 Dipsticks Oil (Engine) . . . . . . . . . . . . . . . . . . . . . . . . . . 301 Disabled Vehicle Towing . . . . . . . . . . . . . . . . . . . 291 Disposal Antifreeze (Engine Coolant) . . . . . . . . . . . . . . . 317 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . 303 Door Locks . . . . . . . .
INDEX Break-In Recommendations . . . . . . . . . . . . . . . . 67 Checking Oil Level . . . . . . . . . . . . . . . . . . . . . 301 Compartment . . . . . . . . . . . . . . . . . . . . . . . . . 296 Coolant (Antifreeze) . . . . . . . . . . . . . . . . . 314,342 Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314 Exhaust Gas Caution . . . . . . . . . . . . . . . . . . 68,273 Fails to Start . . . . . . . . . . . . . . . . . . . . . . . . . . 218 Flooded, Starting . . . . . . . . . . . . . . .
368 INDEX Flashers Hazard Warning . . . . . . . . . . . . . . . . . . . . . . . 280 Turn Signal . . . . . . . . . . . . . . . . . . . . . . 70,119,152 Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Flooded Engine Starting . . . . . . . . . . . . . . . . . . . 218 Fluid, Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . 343 Fluid Capacities . . . . . . . . . . . . . . . . . . . . . . . . . 341 Fluid Leaks . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Fueling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274 Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329 Garage Door Opener (HomeLinkt) . . . . . . . . . . . 130 Gas Cap (Fuel Filler Cap) . . . . . . . . . . . . . . . 274,297 Gasoline, Clean Air . . . . . . . . . . . . . . . . . . . . . . 270 Gasoline (Fuel) . . . . . . . . . . . . . . . . . . . . . . . . . 270 Gasoline, Reformulated . . . . . . . . . . . . . . . . . . . 270 Gauges Coolant Temperature . . .
370 INDEX Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312 Heated Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Heated Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 Heater, Engine Block . . . . . . . . . . . . . . . . . . . . . 219 High Beam/Low Beam Select (Dimmer) Switch . . 120 Holder, Cup . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Knee Bolster . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Lane Change and Turn Signals . . . . . . . . . . . . . . 119 Lap/Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . 38 LATCH (Lower Anchors and Tether for CHildren) . . . . . . . . . . . . . . . . . . . . . . . . . 61,62 Latch Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Hood . . . . . . . . . . . . . . . . . . . . . . . . .
372 INDEX Illuminated Entry . . . . . . . . . . . . . . . . . . . . . . . 20 Instrument Cluster . . . . . . . . . . . . . . . . . . 116,150 Intensity Control . . . . . . . . . . . . . . . . . . . . . . . 121 Interior . . . . . . . . . . . . . . . . . . . . . . . . . . 121,129 License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 Lights On Reminder . . . . . . . . . . . . . . . . . . . . 118 Low Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Low Tire . . . . . . . . . . .
INDEX Maintenance Free Battery . . . . . . . . . . . . . . . . . . 307 Maintenance, General . . . . . . . . . . . . . . . . . . . . . 300 Maintenance Procedures . . . . . . . . . . . . . . . . . . . 300 Maintenance Schedule . . . . . . . . . . . . . . . . . . . . 346 Maintenance, Sunroof . . . . . . . . . . . . . . . . . . . . . 139 Malfunction Indicator Light (Check Engine) . . 158,298 Manual, Service . . . . . . . . . . . . . . . . . . . . . . . . . 357 Map/Reading Lights . . . . . . . . . . . . . . . .
374 INDEX Change Interval . . . . . . . . . . . . . . . . . . . . . . . 301 Checking . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301 Dipstick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303 Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303,342 Filter Disposal . . . . . . . . . . . . . . . . . . . . . . . . 303 Materials Added to . . . . . . . . . . . . . . . . . . . . . 303 Recommendation . . .
INDEX Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Outlet (Auxiliary Electrical Outlet) . . . . . . . . . . 140 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 Steering, Checking . . . . . . . . . . . . . . . . . . . . . 310 Sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Power Steering Fluid . . .
376 INDEX Remote Keyless Entry (RKE) . . . . . . . . . . . . . . . . . 21 Remote Sound System (Radio) Controls . . . . . . . . 201 Remote Starting System . . . . . . . . . . . . . . . . . . . . 27 Remote Trunk Release . . . . . . . . . . . . . . . . . . . . . 35 Replacement Bulbs . . . . . . . . . . . . . . . . . . . . . . . 336 Replacement Keys . . . . . . . . . . . . . . . . . . . . . . . . 16 Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . 299 Replacement Tires . . . . . . . . . . . . .
INDEX Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Head Restraints . . . . . . . . . . . . . . . . . . . . . . . 111 Heated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Height Adjustment . . . . . . . . . . . . . . . . . . . . . 109 Lumbar Support . . . . . . . . . . . . . . . . . . . . . . . 111 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Rear Folding . . . . . . .
378 INDEX Spark Plugs . . . . . . . . . . . . . . . . . . . . . . . . . 304,342 Specifications Fuel (Gasoline) . . . . . . . . . . . . . . . . . . . . . . . . 342 Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342 Speed Control (Cruise Control) . . . . . . . . . . . . . . 126 Speedometer . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27,214 Automatic Transmission . . . . . . . . . . . . . . . . .
INDEX Theft Alarm (Security Alarm) . . . . . . . . . . . . . . . . 18 Theft System (Security Alarm) . . . . . . . . . . . . . . . 18 Tilt Steering Column . . . . . . . . . . . . . . . . . . . . . 125 Time Delay, Headlight . . . . . . . . . . . . . . . . . . . . 117 Tire and Loading Information Placard . . . . . . . . . 250 Tire Identification Number (TIN) . . . . . . . . . . . . . 249 Tire Markings . . . . . . . . . . . . . . . . . . . . . . . . . . 245 Tire Safety Information . . . . . . . . . . . . . . .
380 INDEX Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . . . 278 Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . 322 Automatic . . . . . . . . . . . . . . . . . . . . . . 220,223,322 Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343 Shifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 Transmitter Battery Service (Remote Keyless Entry) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Viscosity, Engine Oil . . . . . . . . . . . . . . . . . . . . . . 302 Voice Recognition System (VR) . . . . . . . . . . . . . . 104 Warning Flasher, Hazard . . . . . . . . . . . . . . . . . . 280 Warning Lights (Instrument Cluster Description) . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . 6 Warranty Information . . . . . . . . . . . . . . . . . . . . . 356 Washer, Adding Fluid . . . . . . . . . . . . . . . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
2008 Charger SRT8 2008 OWNER’ S MANUAL 81-226-0821 First Edition Printed in U.S.A.
