Datasheet

ManualsBrandsMARQUARDT ManualsPush Actuated Switches & ButtonsMicroswitch 250 Vac 10 A 1 x On/(On) momentary 1 pc(s)

SENSORS

MICRO-SIGNAL SWITCHES SNAP-ACTION SWITCHES TACT AND KEY SWITCHES FOOT SWITCHES ROTARY SWITCHES SLIDE SWITCHES TOGGLE SWITCHES PUSHBUTTON SWITCHES ROCKER SWITCHESSNAP-ACTION SWITCHES ROCKER SWITCHES

176

SERIES 1005 - MINIATURE SNAP-ACTION SWITCHES

TO 21 (8) A 250 V AC

Design DIN 41635 A

Mechanical life endurance 5E6 version with lever or contact spacing > 3 mm

10E6 standard version

5E4 version with curved spring steel lever

Contact resistance (new condition) < 100 mOhm (1 A 12 V DC)

Insulation resistance (new condition) > 100 MOhm (500 V DC)

Proof tracking 250 PTI

Ambient temperature -40 °C ... +100 °C on request ... +125 °C ... +85 °C

Flammability UL 94 (housing: V-0, actuator: V-2)

UL 94 V-2

Glow wire test temperature 850 °C

Material actuator

additional actuator

housing

terminals

galvanized steel / spring steel / stainless steel

Duroplast type 182 / PA glass ﬁ ber-reinforced

silver plated / chromated

Bounce time < 10 ms

Approval marks

3 / 1 / 2

Suitable for appliances of protection class II under compliance with the installation conditions

required on the equipment side

ON REQUEST

Material conform with the ﬁ lament wire test

acc. to IEC 60335-1:2001 chap. 30

Side bearing terminal

Electrical rating 16 (16) A 250 V 5E4 for

normally closed and normally open version



PRODUCT FEATURES

Friction contact system whose shearing

movement can loosen weldings

Very high inrush currents (capacitive)

Contact distances less and greater than 3 mm

Operating forces from 0.2 to 4.2 N



Summary of content (7 pages)

PAGE 1
SERIES 1005 - MINIATURE SNAP-ACTION SWITCHES SENSORS MICRO-SIGNAL SWITCHES SNAP-ACTION SWITCHES TACT AND KEY SWITCHES FOOT SWITCHES ROTARY SWITCHES SLIDE SWITCHES TOGGLE SWITCHES PUSHBUTTON SWITCHES ROCKER SWITCHES TO 21 ( 8 ) A 250 V AC | 176 PRODUCT FE ATURES ON REQUEST  Friction contact system whose shearing movement can loosen weldings  Material conform with the filament wire test acc. to IEC 60335-1:2001 chap.
PAGE 2
SENSORS Free position (FP) max. in mm Permissible total travel position (TP) in mm Lever drawing Stock version Actuator description Miscellaneous L12 MICRO-SIGNAL SWITCHES 0.9 0.3 SNAP-ACTION SWITCHES 18 23.5 13.4 16 z 0.3 0.3 13.4 16 13.4 16 0.3 1.2 13.4 16 13.4 16 1.2 13.4 16 1.2 0.3 13.4 16 13.4 16 0.3 1.2 13.4 16 13.4 16 1.0 0.3 19.3 22.0 z z z L21 Difference travel max. in mm 13.4 16 Operating position (OP) in mm z Operating force in N 1.2 - 2.
PAGE 3
| 178 MICRO-SIGNAL SWITCHES 1.2 Free position (FP) max. in mm 13.4 16 Permissible total travel position (TP) in mm Miscellaneous 18.5 24.5 19.5 22.1 L02 L12 L31 L11 z z z 18 23.5 12.6 18.2 9.8 21.5 L04 z 19.5 22.1 L11 14 16.6 L01 z 12.6 18.2 L02 0.3 13.4 16 19.5 22.1 0.3 13.4 16 z 0.3 0.6 0.9 0.7 1.8 0.3 0.3 0.7 0.3 0.3 13.4 16 0.3 z Stock version 13.4 16 Lever drawing z Actuator description L11 Operating position (OP) in mm z Operating force in N 14.
PAGE 4
SERIES 1005 - MINIATURE SNAP-ACTION SWITCHES ROCKER SWITCHES TOGGLE SWITCHES PUSHBUTTON SWITCHES 1004.1002 1004.0402 1004.4601 1006.4203 z z z z z SLIDE SWITCHES ROTARY SWITCHES z z z z 21 (8) A 250 V AC 25E3 20 (4) A 400 V AC 1E4 16 (16) A 250 V AC 5E4 16 (4) A 400 V AC 5E4 16 (4) A 250 V AC 5E4 16 (4) A 250 V AC 25E3 12 (12) A 250 V AC 5E4 10 (6) A 250 V AC 5E4 10 (4) A 400 V AC 1E4 10 (4) A 250 V AC 5E4 8 (8) A 250 V AC 5E4 6 (2.5) A 400 V AC 5E4 6 (2.
PAGE 5
SERIES 1005 - MINIATURE SNAP-ACTION SWITCHES ROCKER SWITCHES TO 21 ( 8 ) A 250 V AC 16 20.2 4 10.2 8.4 3 10.3 16 16 8.7 3 16 16 10.3 3.4 3.4 22.2 22.2 28 28 Quick-connect terminal 6.3 x 0.8 Basic type 1005 4 ø3 ø3 TOGGLE SWITCHES Solder terminal 10.3 6.3 22.2 ø1.6+0.1 4 10.3 20.2 7.5 ø3 8.65 SLIDE SWITCHES 22.2 ROTARY SWITCHES Short solder terminal PCB terminal (cover side) right angled 22.2 10.3 20.2 ø1.6+0.1 14 4 FOOT SWITCHES 3 10.3 2.5 4 16 16 7.
PAGE 6
SERIES 1005 - MINIATURE SNAP-ACTION SWITCHES TP OP Basic types 1004 and 1005 switching positions TP OP TP 20.2 FOOT SWITCHES 19.3 20.6 SENSORS 18.5 OP FP 24.5 20.5 ±0.4 L21: simulated roller 28.8 22 ±1 TP FP 18 < 22 TP OP 23.5 < 20.8 ±1.2 L12: roller lever L31: spring lever OP FP ø4.95 TACT AND KEY SWITCHES L11: roller lever 34 ROTARY SWITCHES SLIDE SWITCHES 12.6 19.5 22.1 20.8 ±0.5 < L04: straight lever 20.6 TP OP FP ø5 TP OP 9.8 21.5 < 15.7 ±2.
PAGE 7
SERIES 1005 - MINIATURE SNAP-ACTION SWITCHES 25.5 38 Insulating plate for solder terminal 0.5 mm: 231.009.011 Additional parts TOGGLE SWITCHES PUSHBUTTON SWITCHES 25.5 ROCKER SWITCHES TO 21 ( 8 ) A 250 V AC 43 Insulating plate for quick-connect terminal 0.5 mm: 231.010.011 0.8 mm: 231.010.021 Stainless spring steel SLIDE SWITCHES lever 20.