Sécurité Consulting the history Print-out history ► ► Maintenance history ► ► Instruction manual 24
Replacing the consumables Sécurité Only if: Replace ink cartridge Replace additive cartridge Replace ink cartridge Replace additive cartridge 3 2 1 Ink Additive 6 9175 06/18 4 5 Repeat operations 1 to 6 in reverse order. The ink cartridge drains completely into the printer's internal tank in 45 minutes. Pigmented ink: shake the cartridge before fitting. Only use Markem-Imaje consumables.
Sécurité G Head cleaning Ready ► Jet stopped Only use Markem-Imaje cleaning fluid.
G Head cleaning Sécurité 2 3 Jet stopped 2 1 Ready 00:00:45 When using certain inks or operating the printer in harsh environments (hot and/or dusty environments), you will need to clean the head thoroughly. See user manual or Sheet A47081.
Sécurité M Head cleaning Ready ► Jet stopped Only use Markem-Imaje cleaning fluid.
M Head cleaning Sécurité 2 3 Jet stopped 2 1 Ready 00:00:45 When using certain inks or operating the printer in harsh environments (hot and/or dusty environments), you will need to clean the head thoroughly. See user manual or Sheet A47081.
Troubleshooting Alarm Fault: printing not possible Consult the troubleshooting screens (if available) Acknowledge the fault or alarm Acknowledge all faults and alarms Instruction manual 30
Information Sécurité S/N: Serial number: Additive ref.: Ink Ref.: For Marking & Coding Equipment. Photographs and drawings are not binding in detail. This document was originally written in French. The French text of this document shall alone be authentic and shall prevail in the event of a dispute. Markem-Imaje reserves the right to modify the specifications of its products without prior notice. Any reproduction, even partial, of this document is prohibited.
User Documentation Department the team to trust en 10/2014 - A A48552 www.markem-imaje.com Markem-Imaje Industries 9, rue Gaspard Monge - B.P.