MOMARK AMP FRAME 250 / AMP FRAME 500 / AMP FRAME 600 / AMP FRAME 800 OWNER’S MANUAL www.momark.it www.markbass.
1. IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions; 2) Keep these instructions; 3) Heed all warnings; 4) Follow all instructions; 5) Do not use this apparatus near water; 6) Clean only with dry cloth; 7) Do not block any ventilation openings.
2.MOMARK MODULES ASSEMBLY INSTRUCTION 5 4 3 Prior to installing and/or removing modules, be sure to turn the unit off AND unplug it from the power source. Do not connect the unit to a power source unless all three modules are installed in the amp frame. Insert the tool (1) supplied with the modules into the two holes on the front panel of the module. 2 1 3. MOMARK REAR PANEL 5 2 Slide each module right-side-up into the amp frame.
Product specifications are subject to change without notice. v 5.jun.2009 4.MOMARK Amplifier SECTIONS Technical Details 250 WATT 500 WATT 600 WATT 800 WATT INPUT RETURN EFFECT unbalanced; impedance range 22-100 Kohm (depends on the module’s input); max voltage 20 Vpp (depends on the module’s input) OUTPUT SEND EFFECT unbalanced; impedance 1 Kohm; max. voltage 12 Vpp (depends on module’s input); max DC value 50 V TUNER OUT LINE OUT unbalanced; impedance 3.9 Kohm; max.
