No5802 RS232 Command Codes

ManualsBrandsMark Levinson ManualsAudio EquipmentNo. 5802 - Integrated amplifier for digital sources

TECHNICAL BULLETIN

HARMAN International Industries, Incorporated, 8500 Balboa Boulevard, Northridge, CA 91329 USA www.marklevinson.com

not be

construed as a commitment on the part of HARMAN International Industries, Incorporated. The information it contains, as well as the features, specifications and appearance of the

product, is

subject to change without notice. HARMAN International Industries, Incorporated, assumes no responsibility for errors that may appear within this document.

Bulletin #

010-00029

Models Affected No5802 – No5805

Versions V1.43 and above

Topic RS232 and IR Control Codes

EquipmentNeeded

 PCorLaptopwithTerminalEmulatorinstalled(seeSetupifTerminalEmulatorisnotinstalled)

 USBtoRS232Converter(ifPC/LaptopdoesnothaveanSerialPort)[werecommendStarTechICUSB232DB25]



RS232ControlCodeProcedure



1. ConnecttheRS232portofML580XtotheUSBportofacomputerusingaUSBtoRS232adapter.



No5802RearPanel



No5805RearPanel



2. Onthecomputer,launchaserialterminalprogramlike“Tera‐Term”.Tera‐Termcanbedownloadedfrom

https://download.cnet.com/Tera‐Term/3000‐2094_4‐75766675.html



Summary of content (9 pages)

PAGE 1
TECHNICAL BULLETIN Bulletin # 010-00029 Models Affected No5802 – No5805 Versions V1.43 and above Topic RS232 and IR Control Codes Equipment Needed   PC or Laptop with Terminal Emulator installed (see Setup if Terminal Emulator is not installed) USB to RS232 Converter (if PC/Laptop does not have an Serial Port) [we recommend StarTech ICUSB232DB25] RS232 Control Code Procedure 1. Connect the RS232 port of ML580X to the USB port of a computer using a USB to RS232 adapter.
PAGE 2
TECHNICAL BULLETIN 3. Configure the RS232 connection in Tera‐Term: Click “File‐>New Connection” 4. Check the Serial radio button , then use the drop down to find the COM port that says “COMX: Prolific USB‐to‐Serial Comm Port (COMX)” (Where X is the number of the COM port). HARMAN International Industries, Incorporated, 8500 Balboa Boulevard, Northridge, CA 91329 USA www.marklevinson.com © 2016 HARMAN International Industries, Incorporated. All rights reserved.
PAGE 3
TECHNICAL BULLETIN 5. Click on the COM port, then Click OK. 6. The computer will now be able to communicate with the No580X via any of the RS‐232 commands listed in the tables HARMAN International Industries, Incorporated, 8500 Balboa Boulevard, Northridge, CA 91329 USA www.marklevinson.com © 2016 HARMAN International Industries, Incorporated. All rights reserved. Mark Levinson is registered trademark of HARMAN International Industries, Incorporated.
PAGE 4
TECHNICAL BULLETIN No5802 RS232 Control Codes STANDBY ENTER SETUP BALANCE VOL_DOWN VOL_UP MUTE !1005 !100F !1015 !102F !1030 !1031 !1032 PREV_IN NEXT_IN !1035 !1036 OUT_STANDBY IN_STANDBY !1038 !1039 INPUT C1 INPUT T1 INPUT T2 INPUT USB INPUT BT INPUT AES INPUT C2 !103F !1040 !1041 !1042 !1043 !1044 !1045 IN_MUTE OUT_MUTE STATUS STANDBY_NORMAL STANDBY_GREEN STANDBY_PWRSAVE !1050 !1051 !1061 !1062 !1063 !1064 Direct volume Direct Balance !2XXX !3SXX Current volume read Current balance read !2GET
PAGE 5
TECHNICAL BULLETIN Enable Power Amp !O004 !O005 PowerAmp Disabled PowerAmp Enabled Network IP Address !IP Return current Network IP address Factory Restore !1000 Restore default configuration parameters When something is entered correctly, the return prompt will be OK: When something is entered incorrectly, the return prompt will be EH? HARMAN International Industries, Incorporated, 8500 Balboa Boulevard, Northridge, CA 91329 USA www.marklevinson.
PAGE 6
TECHNICAL BULLETIN No5805 RS232 Control Codes STANDBY ENTER SETUP BALANCE VOL_DOWN VOL_UP MUTE !1005 !100F !1015 !102F !1030 !1031 !1032 PREV_IN NEXT_IN !1035 !1036 OUT_STANDBY IN_STANDBY !1038 !1039 INPUT B1 INPUT S1 INPUT S2 INPUT Phono INPUT C1 INPUT T1 INPUT T2 INPUT USB INPUT BT !103A !103B !103C !103D !103F !1040 !1041 !1042 !1043 IN_MUTE OUT_MUTE STATUS STANDBY_NORMAL STANDBY_GREEN STANDBY_PWRSAVE !1050 !1051 !1061 !1062 !1063 !1064 Direct volume !2XXX Direct Balance !3SXX Current volum
PAGE 7
TECHNICAL BULLETIN Phono MM Type Phono MC Type Phono Filter Off Phono Filter On !4200 !4201 !4220 !4221 Phono MM Type Phono MC Type Phono Filter Off Phono Filter On Phono Type MM (enable MM) Phono Type MC (enable MC) Phono Infrasonic Filter Off Phono Infrasonic Filter On Phono Balance Set !4SXX Set phono balance SXX where S is 0 for Balance Left and 1 for Balance Right, respectively. XX represents the balance in HEX, ranging from 00 to 1E (decimal 0 ‐ 30, 0,5,10..).
PAGE 8
TECHNICAL BULLETIN Enter Select Plus Select Minus Volume Plus Volume Minus Polarity Balance 42.84 42.84 42.84 42.84 42.84 42.84 42.
PAGE 9
TECHNICAL BULLETIN NEXT_TRACK 42.84 76 PREVIOUS_TRACK 42.84 77 PAUSE 42.84 74 STOPPLAY 42.84 75 CLARIFI_TOGGLE 42.