Users Manual Part 2

ManualsBrandsMARATHON ManualsElectronicsWireless Charging Clock

4. The alarm will sound again after 5 minutes. The

icon (A2)ashesonthedisplayduringthesnooze

time. This process can be repeated 7 times. After

snoozing the clock 7 times, the alarm will not

sound again.

5. When the alarm sounds,

icon (A4)asheson

the display.

6. Slide

switch (B1) to OFF to deactivate the

alarm function or press any of the buttons to stop

the alarm, with the exception of the

button (C3). If no selection is made, the alarm signal

will sound for 3 minutes and then stop automatically.

USB PORT

The maximum current output of USB port is 2A.

NOTE: Only charge devices that self-regulate.

BACKLIGHT

Backlight Brightness Adjustment

Press the

button (C3) to switch the

backlight brightness. There are three selectable options:

Low, Medium, High. Every press of the

button (C3) will alternate through the 3 options.

LED Backlight Colour

1. Press the

or button (C1 or C4) to select your

preferred LED backlight colour.

2. To have the LED backlight colour change

automatically, hold the

or button for 2

seconds. Press the

or button again to stop the

color changing.

Summary of content (5 pages)

PAGE 1
4. The alarm will sound again after 5 minutes. The icon (A2) flashes on the display during the snooze time. This process can be repeated 7 times. After snoozing the clock 7 times, the alarm will not sound again. 5. When the alarm sounds, icon (A4) flashes on the display. 6. Slide switch (B1) to OFF to deactivate the alarm function or press any of the buttons to stop the alarm, with the exception of the button (C3).
PAGE 2
EN QI WIRELESS CHARGING NOTE: You must have a Qi enabled device to use the Qi Wireless Charging function of this clock. If you have an iPhone 7 or older, you likely are not able to use this function. You must check your device’s user manual to confirm if your device is compatible with this feature. 1. Place your Qi enabled device at the center of the charging pad (C2). 2. When a successful link occurs between the clock and the device, the icon (A6) will appear on the screen.
PAGE 3
CLEANING 1. Do not expose the unit to extreme temperatures, water, or severe shock. 2. Avoid cleaning the unit with any corrosive materials, such as perfume, alcohol, or cleaning agents. Always clean the unit with a damp cloth. Never spray any cleaning agents onto the unit directly. NOTE: You must unplug your clock from the electrical outlet before cleaning to avoid the risk of shock or damage. Our Products contain high quality components and are designed to facilitate recycling.
PAGE 4
FR VUE D’ENSEMBLE A1 A2 A3 A6 A7 A4 A8 A5 A9 A10 Partie A – Recto et verso A1: A2: A3: A4: A5: A6: A7: A8: A9: B1 B2 Partie B – Côtés Temps B1: Icône B2: Icône Icône Temps d’alarme Icône Icône Port USB Prise pour adaptateur de climatisation A10: Bouton Interrupteur Interrupteur /
PAGE 5
C2 C1 C3 D1 C4 Partie C – Haut Partie D – Bas C1: C2: C3: Bouton Bloc de charge Bouton D1: Compartiment des piles C4: Bouton CARACTÉRISTIQUES • • • Charge sans fil Qi: Il suffit de placer n’importe quel appareil de recharge sans fil compatible avec le Qi sur le bloc de recharge. Aucune connexion par câble n’est nécessaire. Horloge numérique avec fonction d’alarme quotidienne. Écran LED couleur vif et lumineux.