Contents Connections Playback Settings Tips Appendix .
Contents Connections Playback Settings 7 8 8 9 9 10 13 14 14 18 20 24 Accessories Inserting the batteries Operating range of the remote control unit Features High quality sound High performance Easy operation Part names and functions Front panel Display Rear panel Remote control unit Front panel Display Rear panel Appendix Connecting a playback device Connecting a set-top box (Satellite tuner/cable TV) Connecting a DVD player or Blu-ray Disc player Connecting a video camcorder or game console Conne
Contents Connections Playback Playing an iPod Listening to music on an iPod iPod Browse Mode settings Performing repeat playback Performing random playback Playing a USB memory device Playing files stored on USB memory devices Listening to music on a Bluetooth device Playing music from Bluetooth device Pairing with other Bluetooth devices Reconnecting to this unit from a Bluetooth device Listening to FM/AM broadcasts Listening to FM/AM broadcasts Tuning in by entering the frequency (Direct Tune) Changing
Contents Connections Playback AirPlay function Playing songs from your iPhone, iPod touch or iPad Playing iTunes music with this unit Selecting multiple speakers (devices) Perform iTunes playback operations with the remote control unit of this unit Spotify Connect function Playing Spotify music with this unit Convenience functions Performing repeat playback Performing random playback Registering to Favorites (Save to Favorites) Playing back content added to Favorites Deleting content added to favorites S
Contents Connections Playback Settings Settings Front panel Inputs Input Assign Source Rename Hide Sources Source Level Input Select Speakers Audyssey® Setup Procedure for speaker settings (Audyssey® Setup) Error messages Retrieving Audyssey® Setup settings Manual Setup Amp Assign Speaker Config.
Contents Connections Playback Network Information Connection Wi-Fi Setup Settings Network Control Friendly Name Diagnostics General Language ECO ZONE2 Setup Zone Rename Smart Select Names Trigger Out Front Display Firmware Information Usage Data Setup Lock Limiting the operating zone with the remote control Front panel Display Rear panel Settings Tips Appendix Tips 230 230 230 231 234 236 236 237 238 238 238 241 243 244 244 245 246 248 250 250 251 253 255 273 Tips Troubleshooting Resetting fact
Contents Connections Playback Settings Tips Appendix Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories . Check that the following parts are supplied with the product.
Connections Contents Playback Settings Inserting the batteries 1 Tips Appendix NOTE 0 To prevent damage or leakage of battery fluid: 0 Do not use a new battery together with an old one. 0 Do not use two different types of batteries. 0 Remove the batteries from the remote control unit if it will not be in use for long periods. 0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery compartment and insert new batteries.
Contents Connections Playback Settings Tips Appendix Features 0 Audyssey LFC™ (Low Frequency Containment) (v p. 182) High quality sound Audyssey LFC™ solves the problem of low frequency sounds disturbing people in neighboring rooms or apartments. Audyssey LFC™ dynamically monitors the audio content and removes the low frequencies that pass through walls, floors and ceilings. It then applies psychoacoustic processing to restore the perception of low bass for listeners in the room.
Contents Connections Playback Settings Tips Appendix 0 Digital video processor upscales analog video signals (SD High performance resolution) to HD (720p/1080p) and 4K (v p. 195) 0 4K 60Hz input/output supported 4K Up scaling . Up to 1080p . This unit is equipped with a 4K video upscaling function that allows analog video or SD (Standard Definition) video to be output via HDMI at 4K (3840 × 2160 pixels) resolution.
Contents Connections Playback Settings 0 HDMI connections enable connection to various digital AV Tips Appendix 0 The device is equipped with a AirPlay® function in addition to devices (8 inputs, 2 outputs) network functions such as Internet radio etc. (v p. 123) 8 2 Out . . In You can enjoy a wide variety of content, including listening to Internet Radio, playing audio files stored on your PC, and displaying photographs stored on your PC on our television.
Contents Connections Playback Settings 0 Wireless connection with Bluetooth devices can be carried out Tips Appendix 0 Multi-Room audio (v p. 137) easily (v p. 92) GZONE2H . GMAIN ZONEH . You can select and play back the respective inputs in MAIN ZONE and ZONE2. In addition, when the All Zone Stereo function is used, the music being played back in MAIN ZONE can be enjoyed in all the zones at the same time. This is useful when you want to let the BGM propagate throughout the whole house.
Contents Connections Playback Settings Tips Easy operation 0 “Setup Assistant” provides easy-to-follow setup instructions First select the language when prompted. Then simply follow the instructions displayed on the TV screen to set up the speakers, network, etc. 0 Easy to use Graphical User Interface This unit is equipped with a Graphical User Interface for improved operability.
Contents Connections Playback Settings Tips Appendix Part names and functions Front panel w e r For details, see the next page. Front panel t y u .
Contents q w Connections e r Playback t Settings y Tips Appendix C INPUT SELECTOR knob This selects the input source. (v p. 82) D Display This displays various pieces of information. (v p. 18) E Remote control sensor This receives signals from the remote control unit. (v p. 8) . F VOLUME knob This adjusts the volume level. (v p. 83) G Door When you are using buttons and/or connectors behind the door, press the bottom of the door to open it.
Contents Connections Playback Settings With the door open qw e r t y Tips Appendix C M-DAX button This switches the M-DAX mode. (v p. 177) u i o D M-DAX indicator This lights when the M-DAX mode is selected. (v p. 177) Q0 E ZONE2 ON/OFF button This turns the power of ZONE2 (separate room) on/off. (v p. 165) F ZONE2 SOURCE button This selects the input source for ZONE2. (v p. 165) G Tuner preset channel buttons (TUNER PRESET CH +, –) These select preset broadcast stations. (v p.
Contents Connections Playback Settings Tips Appendix L SETUP MIC jack This is used to connect the supplied Sound calibration microphone. (v p. 207) M USB port (T) This is used to connect USB storages (such as USB memory devices) and the USB cable supplied with iPod. (v p. 72) Q2 Q3 Q4 Q5 O AUX1 INPUT connectors Used to connect analog output compatible devices such as video camcorders and game consoles. (v p. 69) .
Contents Connections Playback Settings Tips Appendix Display The input source name, sound mode, setting values and other information are displayed here. o Tuner display o Standard display These light up according to the reception conditions when the input source is set to “Tuner”. . e r q w Front panel Display Rear panel . A Volume indicator B Input source indicator The currently selected input source name is displayed.
Contents Connections Playback Settings o Sleep timer indicator Tips Appendix o ZONE2 power on display . y . t This lights up when ZONE2 (separate room) power is turned on. (v p. 165) E This lights when the sleep mode is selected. (v p.
Contents Connections Playback Settings Tips Appendix Rear panel . q w er Q2 ty Q3 u i Q4 o Q5 Q6 Q7 For details, see the next page.
Contents Connections Playback Settings . C Digital audio connectors (DIGITAL AUDIO) Used to connect devices equipped with digital audio connectors. 0 “Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC (Audio Return Channel)” (v p. 64) 0 “Connection 3 : TV equipped without an HDMI connector” (v p. 65) 0 “Connecting a set-top box (Satellite tuner/cable TV)” (v p. 67) 0 “Connecting a DVD player or Blu-ray Disc player” (v p.
Contents Connections i o Q0 Settings F SIGNAL GND terminal Used to connect a ground wire for the turntable. (v p. 70) J NETWORK connector Used to connect to a LAN cable when connecting to a wired LAN network. (v p. 76) G REMOTE CONTROL jacks Used to connect infrared receivers/transmitters in order to operate this unit and external devices from a different room. (v p. 78) Display Rear panel Appendix I HDMI connectors Used to connect devices equipped with HDMI connectors.
Contents Connections Playback Settings Tips Appendix N 7.1-channel input connectors (7.1CH IN) Used to connect to a device that has multi-channel audio output connectors. (v p. 71) O Speaker terminals (SPEAKERS) Used to connect speakers. (v p. 35) . Q2 Q3 Q4 Q5 Q6 P PRE OUT connectors Used to connect a subwoofer with built-in amplifier or an external power amplifier. 0 “Connecting the subwoofer” (v p. 36) 0 “Connection 3 : Connection using an external amplifier (ZONE2)” (v p.
Contents Connections Playback Settings Tips Appendix Remote control unit A ZONE SELECT buttons These switch the zone (MAIN ZONE, ZONE2) that is operated through the remote control unit. 0 “Playback in ZONE2” (v p. 165) 0 “Menu operations” (v p. 170) q B Input source select buttons These selects the input source. 0 “Selecting the input source” (v p. 82) 0 “Playback in ZONE2” (v p. 165) w C Channel/page search buttons (CH/PAGE df) These select radio stations registered to presets or switch pages.
Contents Connections Playback Settings Tips Appendix G BACK button This returns to the previous screen. H System buttons These perform playback related operations. Tuning up / Tuning down buttons (TUNE +, –) These select either FM broadcast or AM broadcast. (v p. 98) Q1 Q2 I SMART SELECT buttons (1 – 4) These call up settings registered to each button, such as input source, volume level and sound mode settings. (v p. 155) J SOUND MODE buttons These select the sound mode. (v p.
Contents Connections Playback Settings Tips Appendix M POWER button (X) This turns the power on/off. 0 “Turning the power on” (v p. 82) 0 “Playback in ZONE2” (v p. 165) N ECO Mode button (G) This switches to ECO Mode. (v p. 238) Q3 O VOLUME buttons (df) These adjusts the volume level. 0 “Adjusting the volume” (v p. 83) 0 “Adjusting the volume (ZONE2)” (v p. 166) P OPTION button This displays the option menu on the TV screen. Q4 Q5 Q ENTER button This determines the selection.
Contents Connections Playback Settings o Contents Tips Appendix o Cables used for connections 62 Connecting a playback device 66 Connecting an iPod or USB memory device to the USB port 72 Connecting an FM/AM antenna 74 Connecting to a home network (LAN) 76 Connecting an external control device 78 Connecting the power cord 80 Speaker cable . Connecting a TV Provide necessary cables according to the devices you want to connect. Subwoofer cable . 28 HDMI cable .
Contents Connections Playback Settings Tips Appendix Connecting speakers Install speakers and connect them to this unit. (“Speaker installation” (v p. 28), “Speaker connection” (v p. 35)) Speaker installation Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Speaker installation is explained using this example of a typical installation. FL SL SW2 SR SW1 SB SBR .
Contents RHL Connections TRL TML TFL FHL TRR TMR TFR Playback Settings Tips Appendix Place the FRONT HEIGHT left and right speakers FHL/FHR directly above the front speakers. Mount them as (Front height speaker close to the ceiling as possible and aim them left/right): towards the main listening position.
Contents Connections FDL Playback Settings Tips About Dolby Atmos Enabled speakers Dolby Atmos Enabled speakers reflect the sound off the ceiling to allow the sound to come from over your head by using a special upwardpointing speaker that is placed on the floor. You can enjoy the Dolby Atmos 3D sound even in an environment where speakers cannot be installed on the ceiling. FDR SDL SDR BDR . BDL Place the FRONT Dolby Atmos Enabled speaker FDL/FDR on the front speaker.
Contents Connections Playback Settings Tips Appendix Height speakers layout 0 This unit is compatible with Dolby Atmos and DTS:X which offers an even wider and deeper surround sensation. 0 Dolby Atmos is not supported in a 5.1ch or less speaker configuration. 0 DTS:X can be selected regardless of the speaker configuration. 0 Use the illustration below as a guide for how high each speaker should be installed. The height does not need to be exactly the same.
Contents Connections Playback Settings o When 7.1-channel speakers are installed using surround back speakers Tips Appendix o When 5.1-channel speakers are installed FR FL FR FL SW SW C z1 z2 z1 z2 z3 SL C SL SR . SR Listening position z1 22° - 30° z2 120° SBR . SBL z1 22° - 30° z2 90° - 110° z3 135° - 150° 0 When using a single surround back speaker, place it directly behind the listening position.
Contents Connections Playback Settings o Layout including height speakers and ceiling speakers Tips Appendix n Ceiling speaker layout example Combination of 5.1-channel layout and top front/top rear speakers. n Height speaker layout example TRL TRR TFL Combination of 5.1-channel layout and front height/rear height speakers. TFR FL RHL RHR FHL SW FR C FHR FR C SR . SW .
Contents Connections Playback Settings Tips n Dolby Atmos Enabled speaker layout example Combination of 5.1-channel layout and front Dolby/surround Dolby speakers. FDL SDL FL SW FDR C SR .
Contents Connections Playback Settings Speaker connection NOTE 1. Press and hold the main unit’s ZONE2 SOURCE and STATUS at the same time for at least 3 seconds. “Video Format < NTSC>” appears on the display. 2. Press DIMMER on the main unit twice. NOTE 0 Disconnect this unit’s power plug from the power outlet before connecting the speakers. Also, turn off the subwoofer. 0 Connect so that the speaker cable core wires do not protrude from the speaker terminal.
Contents Connections Playback Settings Appendix o Connecting the subwoofer o Connecting the speaker cables Use a subwoofer cable to connect the subwoofer. Two subwoofers can be connected to this unit. To use two subwoofers, set “Subwoofer” to “2 spkrs” in the “Speaker Config.” setting. (v p. 221) The level and distance can be set separately for Subwoofer 1 and Subwoofer 2.
Contents Connections Playback Settings o About the cable label (supplied) for channel identification Speaker terminals FRONT L FRONT R CENTER SURROUND L SURROUND R SURROUND BACK L SURROUND BACK R FRONT HEIGHT L FRONT HEIGHT R TOP FRONT L TOP FRONT R TOP MIDDLE L TOP MIDDLE R TOP REAR L TOP REAR R REAR HEIGHT L REAR HEIGHT R FRONT DOLBY L FRONT DOLBY R SURROUND DOLBY L SURROUND DOLBY R BACK DOLBY L BACK DOLBY R SUBWOOFER The channel display section for speaker terminals on the rear panel is color-coded
Contents Connections Playback Settings Tips Attach the cable label for each channel to its speaker cable as shown in the diagram. Refer to the table and attach the label to each speaker cable. Then, make connection so that the color of the speaker terminal matches that of the cable label. G How to attach the cable label H Speaker .
Contents Connections Playback Settings Tips Appendix Speaker configuration and “Amp Assign” settings This unit has a built-in 9-channel power amplifier. In addition to the basic 5.1-channel system, a variety of speaker systems can be configured by changing the “Amp Assign” settings to suit the application, such as 7.1-channel systems, bi-amp connections and 2-channel systems for multi-zone playback. (v p.
Contents Connections Playback Settings Tips 0 In addition to the connections described in p.41 - 60, this unit allows for various speaker connections with the “Amp Assign” setting. Also refer to the menu screen in “View Terminal Config.” on the “Amp Assign” setting screen, which shows how to make connections in your environment. Speakers/Amp Assign Assign Mode 11.1ch PRE OUT T.REAR SUBWOOFER 1 2 SPEAKERS FRONT FRONT CENTER SURROUND SURROUND SURR.BACK SURR.BACK T.FRONT T.FRONT .
Contents Connections Playback Settings Tips o 5.1-channel playback This serves as a basic 5.1-channel surround system. FL FR SW C SL SW FR FL C SR SL . .
Contents Connections Playback Settings Tips Appendix o 7.1-channel playback n Example connections when using surround back speakers This 7.1-channel surround system is the same as a basic 5.1-channel system but with surround back speakers. FL FR SW C SL . SR SW FR FL C SR SL SBR SBL SBR . SBL 0 When using a single surround back speaker, connect it to the SURROUND BACK L terminal. 0 Set “Floor” - “Layout” to “5ch & SB” in the menu when connecting in this configuration. (v p.
Contents Connections Playback Settings Tips Appendix n Example connections when using ceiling speakers This 7.1-channel surround system is the same as a basic 5.1-channel system but with ceiling speakers. TML TMR FL FR SW C SR SW FR FL C SR SL TMR TML . . SL 0 Set “Floor” - “Layout” to “5ch” and “Height Sp” to “2ch” in the menu when connecting in this configuration. (v p. 217) 0 The top front or top rear speakers can be connected instead of the top middle speakers.
Contents Connections Playback Settings Tips Appendix n Example connections when using height speakers FHL FHR FL FR SW C SL SR FR FL C SR SL FHR FHL . . SW 0 Set “Floor” - “Layout” to “5ch” and “Height Sp” to “2ch” in the menu when connecting in this configuration. (v p. 217) 0 The rear height speakers can be connected instead of the front height speakers. In this case, set the height speakers to be connected under “Height” - “Layout” in the menu. (v p.
Contents Connections Playback Settings Tips Appendix n Example connections when using Dolby Atmos Enabled speakers This 7.1-channel surround system is the same as a basic 5.1-channel system but with front Dolby speakers. FDL SL FL SW FDR C FR SR FR FL C SR SL FDR FDL . . SW 0 Set “Floor” - “Layout” to “5ch” and “Dolby Sp” to “2ch” in the menu when connecting in this configuration. (v p. 217) 0 The surround Dolby speakers can be connected instead of the front Dolby speakers.
Contents Connections Playback Settings Tips Appendix o 9.1-channel playback This system, which is based on a 5.1-channel system, plays back up to 9.1-channels at the same time. You can connect speakers for up to 11-channels for MAIN ZONE. When you connect speakers for 10 or more channels, the output speakers automatically switch according to the input signal and sound mode.
Contents Connections Playback Settings Tips Appendix n Example connection when using two sets of ceiling speakers TRL TRR TFL TFR FL SL FR SW C SR SW FR FL C SR SL TFR TFL TRR TRL HEIGHT 2z . . HEIGHT 1z z You can change the combination of the HEIGHT1 and HEIGHT2 channels in the settings. (v p. 52) 0 Set “Height” - “Height Sp” to “4ch” in the menu when connecting in this configuration. (v p.
Contents Connections Playback Settings Tips Appendix n Example connection when using one set of height speakers FHL FHR FL SL FR SW C SBL SR SW FR FL C SR SL SBR SBL FHR FHL HEIGHT 1z . . SBR z The rear height speakers can be connected instead of the front height speakers. In this case, set the height speakers to be connected under “Height” - “Layout” in the menu. (v p. 218) 0 Set “Height” - “Height Sp” to “2ch” in the menu when connecting in this configuration. (v p.
Contents Connections Playback Settings Tips Appendix n Example connection when using two sets of height speakers RHL FHL FHR FL SL RHR FR SW C SR SW FR FL C SR SL FHR FHL RHR RHL HEIGHT 2z . . HEIGHT 1z z You can change the combination of the HEIGHT1 and HEIGHT2 channels in the settings. (v p. 52) 0 Set “Height” - “Height Sp” to “4ch” in the menu when connecting in this configuration. (v p.
Contents Connections Playback Settings Tips Appendix n Example connection when using one set of Dolby Atmos Enabled speakers FDL SL FL SW FDR C FR SR FDR FDL SBL . SBR SW FR FL C SR SL SBR SBL HEIGHT 1z . z The surround Dolby speakers can be connected instead of the front Dolby speakers. In this case, set the Dolby Atmos Enabled speakers to be connected under “Height” - “Layout” in the menu. (v p.
Contents Connections Playback Settings Tips Appendix n Example connection when using two sets of Dolby Atmos Enabled speakers FDL SDL FL SW FDR C SL SDR FR SR SW FR FL C SR SL FDR FDL SDR SDL HEIGHT 2z . . HEIGHT 1z z You can change the combination of the HEIGHT1 and HEIGHT2 channels in the settings. (v p. 52) 0 Set “Height” - “Dolby Sp” to “4ch” in the menu when connecting in this configuration. (v p.
Contents Connections Playback Settings Tips Appendix z Channels output from the HEIGHT1 and HEIGHT2 speaker terminals can be changed to the following patterns according to the speaker systems being used. Set this from “Amp Assign” in the menu. (v p.
Contents Connections Playback Settings Tips Appendix o 11.1-channel playback This system, which is based on a 5.1-channel system, plays back up to 11.1-channels at the same time. You can connect speakers for 11-channels for MAIN ZONE by using an external power amplifier. n Example connection when using two sets of ceiling speakers TRL TFL TRR TRL TFR FL SL HEIGHT 2z TRR FR SW C SBL Power amplifier SR .
Contents Connections Playback Settings Tips Appendix n Example connection when using two sets of height speakers HEIGHT 2z RHL FHL FHR FL SL RHR RHR RHL FR SW C SBL Power amplifier SR . SBR 0 Set “Height” - “Height Sp” to “4ch” in the menu when connecting in this configuration. (v p. 217) SW FR FL C SR SL SBR SBL FHR FHL . HEIGHT 1z z You can change the combination of the HEIGHT1 and HEIGHT2 channels in the settings. (v p.
Contents Connections Playback Settings Tips Appendix n Example connection when using two sets of Dolby Atmos Enabled speakers HEIGHT 2z SDR SDL FDL SDL FL SW FDR C SL FR Power amplifier SDR SR SBL . SBR 0 Set “Height” - “Dolby Sp” to “4ch” in the menu when connecting in this configuration. (v p. 217) . FDR FDL SW FR FL C SR SL SBR SBL HEIGHT 1z z You can change the combination of the HEIGHT1 and HEIGHT2 channels in the settings. (v p.
Contents Connections Playback Settings Tips Appendix z The combination of the HEIGHT1 and HEIGHT2 channels can be changed to the following patterns according to the speaker system being used. Set this from “Amp Assign” in the menu. (v p.
Contents Connections Playback Settings Tips Appendix o 7.1-channel playback (bi-amp connection of front speakers) This system plays back 7.1-channels. You can use the bi-amp connection for front speakers. Bi-amp connection is a method to connect separate amplifiers to the tweeter terminal and woofer terminal of a speaker that supports bi-amplification.
Contents Connections Playback Settings Tips Appendix o 7.1-channel playback + second pair of front speakers This system enables switching playback between front speakers A and B as desired. You can connect speakers for up to 9-channels for MAIN ZONE. When you connect speakers for 8 or more channels, the output speakers automatically switch according to the input signal and sound mode.
Contents Connections Playback Settings Tips Appendix o 7.1-channel playback (MAIN ZONE) + 2-channel playback (ZONE2) This type of configuration plays back 7.1-channels in MAIN ZONE and 2-channels in ZONE2. You can connect speakers for up to 9-channels for MAIN ZONE. When you connect speakers for 8 or more channels, the output speakers automatically switch according to the input signal and sound mode. MAIN ZONE FHL FHR FL FR SW C SL SW FR FL C SR SL SBR SBL FHRz FHLz ZONE2 R ZONE2 L .
Contents Connections Playback Settings Tips Appendix o 5.1-channel playback (bi-amp connection of front speakers: MAIN ZONE) + 2-channel playback (ZONE2) This type of configuration plays back 5.1-channels in MAIN ZONE and 2-channels in ZONE2. You can use the bi-amp connection for front speakers in MAIN ZONE. MAIN ZONE FL (Bi-Amp) SW FR (Bi-Amp) C SL C SW SR SR SL ZONE2 ZONE2 R L (R) ZONE2 q (L) w q FR . ZONE2 R .
Contents Connections Playback Settings Tips Appendix o Connecting an external power amplifier You can use this unit as a pre-amp by connecting an external power amplifier to the PRE OUT connectors. By adding a power amplifier to each channel, the realness of the sound can be further enhanced. Select the terminal to use and connect the device.
Contents Connections Playback Settings Tips Appendix Connecting a TV Connect a TV to this unit so that the input video is output to the TV. You can also enjoy audio from the TV on this unit. How to connect a TV depends on the connectors and functions equipped on the TV. ARC (Audio Return Channel) function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable.
Contents Connections Playback Settings Tips Appendix Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel) Use an HDMI cable to connect a TV that is compatible with the ARC function to this unit. Set “HDMI Control” to “On” when using a TV that supports the ARC function. (v p. 189) TV . HDMI IN (ARC) 0 When using the ARC function, connect to the HDMI MONITOR connector.
Contents Connections Playback Settings Tips Appendix Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC (Audio Return Channel) Use an HDMI cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. TV IN OPTICAL OUT HDMI IN .
Contents Connections Playback Settings Tips Connection 3 : TV equipped without an HDMI connector Use a component video or a video cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. TV OUT OPTICAL OUT IN COMPONENT VIDEO IN Y PB PR VIDEO IN .
Contents Connections Playback Settings Tips Appendix Connecting a playback device This unit is equipped with three types of video input connectors (HDMI, component video and composite video) and three types of audio input connectors (HDMI, digital audio and audio). Select input connectors on this unit according to the connectors equipped on the device you want to connect. If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections.
Contents Connections Playback Settings Tips Connecting a set-top box (Satellite tuner/cable TV) This explanation uses the connection with a satellite tuner/cable TV STB as an example. Select the input connectors on this unit to match the connectors on the device that you want to connect to. (HDMI incompatible device) Satellite tuner/ Cable TV AUDIO R VIDEO COAXIAL OUT AUDIO OUT R L VIDEO OUT COMPONENT VIDEO OUT Y PB PR HDMI OUT L or or L .
Contents Connections Playback Settings Tips Connecting a DVD player or Blu-ray Disc player This explanation uses the connection with a DVD player or Blu-ray Disc player as an example. Select the input connectors on this unit to match the connectors on the device that you want to connect to. (HDMI incompatible device) DVD player AUDIO AUDIO OUT R L R COAXIAL OUT VIDEO OUT Blu-ray Disc player COMPONENT VIDEO OUT Y PB PR HDMI OUT HDMI OUT L or or L .
Contents Connections Playback Settings Tips Connecting a video camcorder or game console This explanation uses the connection with a video camcorders as an example. Connect a playback device to this unit, such as a video camcorder or game console. (HDMI incompatible device) Video camcorder AUDIO VIDEO AUDIO OUT L R VIDEO OUT R L R HDMI OUT .
Contents Connections Playback Settings Tips Appendix Connecting a turntable This unit is compatible with turntables equipped with a moving magnet (MM) phono cartridge. When you connect to a turntable with a low output moving coil (MC) cartridge, use a commercially available MC head amp or a step-up transformer. If you set this unit’s input source to “Phono” and you accidentally increase the volume without having a turntable connected, you may hear a hum noise from the speakers.
Contents Connections Playback Settings Tips Connecting a device with a multi-channel output connector You can connect this unit to an external device fitted with multi-channel sound audio output connectors to enjoy music and video. To play analog signals input from 7.1CH IN connectors, set “Input Mode” to “7.1CH IN”. (v p. 203) Devices with a multi-channel output connector (Blu-ray Disc player, DVD player, External decoder etc.
Contents Connections Playback Settings Tips Appendix Connecting an iPod or USB memory device to the USB port To connect an iPod to this unit, use the USB adapter cable that was supplied with the iPod. For operating instructions see “Playing an iPod” (v p. 84) or “Playing a USB memory device” (v p. 89). iPod USB memory device . or 0 Marantz does not guarantee that all USB memory devices will operate or receive power.
Contents Connections Playback Settings Tips o Supported iPod/iPhone models • iPod classic • iPod nano • iPod touch .
Contents Connections Playback Settings Tips Appendix Connecting an FM/AM antenna Connect the antenna, tune in to a broadcast and then move the antenna to the location where there is least noise. Then use tape, etc. to fix the antenna in this location. (“Listening to FM/AM broadcasts” (v p. 97)) AM loop antenna (supplied) 0 If you are unable to receive a good broadcast signal, we recommend installing an outdoor antenna. For details, inquire at the retail store where you purchased the unit.
Contents Connections Playback Settings Tips o AM loop antenna assembly o Using the AM loop antenna 1 Suspending on a wall Suspend directly on a wall without assembling. 2 Put the stand section through the bottom of the loop antenna from the rear and bend it forward. Insert the projecting part into the square hole in the stand. Stand Square hole . Nail, tack, etc. Loop antenna Standing alone Use the procedure shown above to assemble. When assembling, refer to “AM loop antenna assembly”. .
Contents Connections Playback Settings Tips Appendix Connecting to a home network (LAN) This unit can connect to a network using a wired LAN or wireless LAN. You can connect this unit to your home network (LAN) to enable various types of playback and operations as described below.
Contents Connections Playback Settings Wireless LAN Tips Appendix 0 When using this unit, we recommend you use a router equipped with the following functions: When connecting to the network via wireless LAN, connect the external antennas for Bluetooth/wireless connectivity connection to the rear panel and stand them upright. See “Wi-Fi Setup” on how to connect to a wireless LAN router. (v p.
Contents Connections Playback Settings Tips Appendix Connecting an external control device REMOTE CONTROL jacks o Performing operations by RC on this unit without visual contact o Remotely connecting Marantz devices When you are using a Marantz device other than this unit that supports remote connection, you can transmit remote control signals just by connecting the device to the REMOTE CONTROL IN/OUT connector with a monaural cable.
Contents Connections Playback Settings Tips Appendix DC OUT jack When a device with DC IN jack is connected, the connected device’s power on/standby can be controlled through linked operation to this unit. The DC OUT jack outputs a maximum 12 V DC /150 mA electrical signal. . 12 V DC/150 mA trigger-compatible device NOTE 0 Use a monaural mini-plug cable for connecting the DC OUT jack. Do not use a stereo mini-plug cable.
Contents Connections Playback Settings Tips Connecting the power cord After completing all the connections, insert the power plug into the power outlet. Power cord (supplied) .
Contents Connections Playback Settings o Contents Tips Appendix Playback network audio/service Basic operation Turning the power on 82 Selecting the input source 82 Adjusting the volume 83 Turning off the sound temporarily (Muting) 83 Selecting a sound mode 138 Listening to Internet Radio 105 Playing back files stored on a PC and NAS 109 Listening to Pandora® 113 Listening to SiriusXM Internet Radio 120 AirPlay function 123 Spotify Connect function 126 Convenience functions Pl
Contents Connections Playback Settings Tips Appendix Basic operation Turning the power on ZONE SELECT MAIN Input source select buttons POWER SLEEP ZONE 2 CBL/SAT DVD Blu-ray MEDIA PLAYER GAME AUX1 TV AUDIO AUX2 TUNER iPod/USB CD Bluetooth ONLINE MUSIC PHONO INTERNET RADIO 1 POWER X 0 You can press the input source select button when the unit is in standby mode to turn on the power. 0 You can also switch the power to standby by pressing X on the main unit.
Contents Connections Playback Settings Adjusting the volume 1 Use VOLUME df to adjust the volume. The following describes the procedure for playing DVD player/Blu-ray Disc player. 1 2 3 Turning off the sound temporarily (Muting) 4 Press MUTE :. 0 “MUTE” appears on the display. 0 : appears on the TV screen. Prepare for playback. A Turn on the power of the TV, subwoofer and player. B Change the TV input to the input of this unit. Press POWER X to turn on power to the unit.
Contents Connections Playback Settings Tips Appendix Playing an iPod 0 You can use the USB cable provided with the iPod to connect the iPod with the unit’s USB port and enjoy music stored on the iPod. ZONE SELECT MAIN iPod/USB 0 For information on the iPod models that can be played back with this POWER unit, see “Supported iPod/iPhone models” (v p. 73).
Contents Connections Playback Settings This can be operated when the “iPod Browse Mode” is set to “From iPod”. (v p. 86) 0 “iPod Browse Mode settings” (v p. 86) 0 “Adjusting the volume of each channel to match the input source (Channel Level Adjust)” (v p. 133) 0 “Adjusting the tone (Tone)” (v p. 134) 0 “Displaying your desired video during audio playback (Video Select)” (v p. 135) 0 “Adjusting the picture quality for your viewing environment (Picture Mode)” (v p.
Contents Connections Playback Settings iPod Browse Mode settings Operation buttons 2 3 89 Skip to previous track / Skip to next track (Press and hold) Fast-reverse/Fast-forward (Press and hold) Stop Skip to previous track / Skip to next track The option menu screen is displayed. ui Select “iPod Browse Mode”, then press ENTER. (Press and hold) Fast-reverse / Fastforward Switch to the previous page/next page in the list display The “iPod Browse Mode” screen is displayed.
Contents Connections Playback Settings Tips o Operations accessible through the option menu This can be operated when the “iPod Browse Mode” is set to “OnScreen”. (v p. 86) 0 “iPod Browse Mode settings” (v p. 86) 0 “Performing repeat playback” (v p. 88) 0 “Performing random playback” (v p. 88) 0 “Adjusting the volume of each channel to match the input source (Channel Level Adjust)” (v p. 133) 0 “Adjusting the tone (Tone)” (v p.
Contents Connections Playback Settings 1 Press OPTION with “iPod Browse Mode” set to “OnScreen”. 4 2 3 Use ui to select “Repeat”, then press ENTER. Use o p to select repeat playback mode. Off (Default) : Repeat playback mode is canceled. One: A file being played is played repeatedly. All: All files in the folder currently being played are played repeatedly. Press OPTION with “iPod Browse Mode” set to “OnScreen”. The option menu screen is displayed. The option menu screen is displayed.
Contents Connections Playback Settings Tips Appendix Playing a USB memory device 0 Playing back music or viewing still picture (JPEG) files stored on a USB memory device. ZONE SELECT MAIN iPod/USB 0 Only USB memory devices conforming to mass storage class standards POWER ZONE 2 can be played on this unit.
Contents Connections Playback Settings Playing files stored on USB memory devices 1 2 Operation buttons Appendix Function Playback / Pause 1/3 Skip to previous track / Skip to next track 89 Connect the USB memory device to the USB port. (v p. 72) (Press and hold) Fast-reverse / Fastforward Playback / Pause ENTER Press iPod/USB to switch the input source to “iPod/ USB”.
Contents Connections Playback Settings Tips o Operations accessible through the option menu 0 “Performing repeat playback” (v p. 128) 0 “Performing random playback” (v p. 128) 0 “Searching content with keywords (Text Search)” (v p. 130) 0 “Playing back music and a favorite picture at the same time (Slideshow)” (v p. 131) 0 “Setting the Slideshow Interval” (v p. 132) 0 “Adjusting the volume of each channel to match the input source (Channel Level Adjust)” (v p.
Contents Connections Playback Settings Tips Appendix Listening to music on a Bluetooth device ZONE SELECT MAIN Music files stored on Bluetooth devices such as smartphones, digital music players, etc. can be enjoyed on this unit by pairing and connecting this unit with the Bluetooth device. Communication is possible up to a range of about 32.8 ft/10 m.
Contents Connections Playback Settings Playing music from Bluetooth device 3 4 In order to enjoy music from a Bluetooth device on this unit, the Bluetooth device must first be paired with this unit. Once the Bluetooth device has been paired, it does not need to be paired again. 2 A Connect the supplied external antennas for Bluetooth/wireless connectivity to the Bluetooth/wireless LAN antenna connectors on the rear panel. (v p. 21) B Press POWER X to turn on power to the unit.
Contents Connections Operation buttons 1/3 Playback Settings Function ENTER 0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth device needs to support the AVRCP profile. 0 The remote control of this unit is not guaranteed to work with all Bluetooth devices. 0 Depending on the type of Bluetooth device, this unit outputs audio that is coupled to the volume setting on the Bluetooth device.
Contents Connections Playback Settings Pairing with other Bluetooth devices 3 4 5 Activate the Bluetooth settings on your mobile device. Press OPTION when the input source is “Bluetooth”. The option menu screen is displayed. Use ui to select “Pairing Mode”, then press ENTER. The device will go into the pairing mode. Select this unit when its name appears in the list of devices displayed on the screen of the Bluetooth device.
Contents Connections Playback Settings Tips Reconnecting to this unit from a Bluetooth device After pairing is completed, the Bluetooth device can be connected without performing any operations on this unit. This operation also needs to be performed when switching the Bluetooth device for playback. 1 2 3 4 If a Bluetooth device is currently connected, deactivate the Bluetooth setting of that device to disconnect it. Activate the Bluetooth setting of the Bluetooth device to be connected.
Contents Connections Playback Settings Tips Appendix Listening to FM/AM broadcasts ZONE SELECT MAIN You can use the built-in tuner of this unit to listen to FM broadcasts and AM broadcasts. Make sure the FM antenna and AM loop antenna are connected to this unit first.
Contents Connections Playback Settings Listening to FM/AM broadcasts 1 2 5 Connect the antenna. (“Connecting an FM/AM antenna” (v p. 74)) 6 Press TUNER to switch the input source to “Tuner”. G TV screen H STEREO OPTION Option . . 4 When listening to an FM broadcast. AM: When listening to an AM broadcast. Press TUNE + or TUNE - to select the station you want listen to.
Contents Connections Playback Settings o Operations accessible through the option menu 0 “Tuning in by entering the frequency (Direct Tune)” (v p. 99) You can enter the receiving frequency directly to tune in. 0 “Tuning in to stations and presetting them automatically (Auto Preset 1 Memory)” (v p. 100) 0 “Presetting the current broadcast station (Preset Memory)” (v p. 101) 2 0 “Specify a name for the preset broadcast station (Preset 0 0 0 0 Name)” (v p.
Contents Connections Playback Settings Changing the tune mode (Tune Mode) 2 3 A maximum of 56 radio stations can be automatically preset. Press OPTION when the input source is “Tuner”. 1 The option menu screen is displayed. Use ui to select “Tune Mode”, then press ENTER. 2 Use o p to select the tune mode, then press ENTER. Auto: Automatically search for and tune to a receivable radio station. Manual: Manually change the frequency one step at a time each time the button is pressed.
Contents Connections Playback Settings Presetting the current broadcast station (Preset Memory) 2 3 4 Appendix Channel Default settings 1–8 92.10 / 92.30 / 92.50 / 92.70 / 93.10 / 93.50 / 93.70 / 94.10 MHz 9 – 16 94.30 / 94.50 / 94.70 / 94.90 / 95.10 / 95.30 / 95.50 / 95.70 MHz 17 – 24 Tune in the broadcast station you want to preset. (“Listening to FM/AM broadcasts” (v p. 98)) 98.10 / 98.30 / 98.50 / 98.70 / 98.90 / 99.10 / 100.10 / 100.30 MHz 25 – 32 100.50 / 100.70 / 100.90 / 101.
Contents Connections Playback Settings Specify a name for the preset broadcast station (Preset Name) 5 You can set the name to the preset broadcast station or change it. Up to eight characters can be input. 1 2 3 4 6 Press OPTION when the input source is “Tuner”. The option menu screen is displayed. Tips Use ui to select a name label, then press ENTER. The screen that lets you edit the Preset Name is displayed. 0 If you select “Set Defaults”, then the unit returns to displaying the frequency.
Contents Connections Playback Settings Skipping preset broadcast stations (Preset Skip) 2 3 A Use o p to select the group of broadcast stations you want to skip. B Use ui to select the broadcast station you want to skip. C Use o p to select “Skip”. The station you selected is not displayed. Press OPTION when the input source is “Tuner”. 4 The option menu screen is displayed. Press OPTION to return to the previous screen. Use ui to select “Preset Skip”, then press ENTER.
Contents Connections Playback Settings Tips Cancelling Preset Skip 1 2 3 While the “Preset Skip” screen is displayed, use o p to select a group containing a broadcast station to cancel the skip for. Use ui to select a broadcast station to cancel the skip for. Use o p to select “On”. The skip is cancelled. NOTE 0 “Preset Skip” cannot be cancelled for groups.
Contents Connections Playback Settings Tips Appendix Listening to Internet Radio 0 Internet Radio refers to radio broadcasts distributed over the Internet. Internet Radio stations from around the world can be received. ZONE SELECT MAIN ONLINE MUSIC CH/PAGE df ZONE 2 DVD Blu-ray GAME AUX1 MEDIA PLAYER TV AUDIO AUX2 TUNER iPod/USB CD Bluetooth ONLINE MUSIC PHONO INTERNET RADIO ECO 0 The audio format types and specifications supported by this unit for playback are as follows.
Contents Connections Playback Settings Listening to Internet Radio 1 4 Prepare for playback. 0 Check the network environment, then turn on this unit’s power. (“Connecting to a home network (LAN)” (v p. 76)) 2 Press ONLINE MUSIC. 0 You can also press INTERNET RADIO to select the input source “Internet Radio” directly. Use uio p to select “Internet Radio”, then press ENTER.
Contents 5 Connections Playback Settings Operation buttons Function Playback / Stop ENTER (Press and hold) Stop CH/PAGE d f Switch to the previous page/next page in the list display Appendix Playing the last played Internet Radio station Use ui p to select the station, then press ENTER. Playback starts once buffering reaches “100%”. 1/3 Tips 1 Press INTERNET RADIO. The source switches to “Internet Radio” and the last played radio station plays.
Contents Connections Playback Settings Using vTuner to add Internet Radio stations to favorites 4 5 There are many Internet Radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be difficult, because there are too many stations. If this is the case, then please use vTuner, an Internet Radio station search website specifically designed for this unit.
Contents Connections Playback Settings Tips Appendix Playing back files stored on a PC and NAS 0 This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA. ZONE SELECT MAIN ZONE 2 CBL/SAT ONLINE MUSIC CH/PAGE df using technologies shown below. Windows Media Player Network Sharing Service 0 The audio/video format types and specifications supported by this unit for playback are as follows.
Contents Connections Playback Settings Tips Appendix Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. To use Windows Media Player as a music server, configure the settings below in advance. To use a music server other than Windows Media Player, consult the help contents of your music server to configure settings. .
Contents Connections Playback Settings Playing back files stored on a PC and NAS 4 5 Use this procedure to play music files, image files or playlists. 2 3 Prepare for playback. Appendix Use ui to select the server including the file to be played, then press ENTER. Use iu p to select the file, then press ENTER. Playback starts once buffering reaches “100%”. A Check the network environment, then turn on this unit’s power. (“Connecting to a home network (LAN)” (v p. 76)) B Prepare the computer.
Contents Connections Playback Settings Appendix o Operations accessible through the option menu 0 The display switches between track title, artist name, and album title each time the main unit’s STATUS is pressed. 0 When a WMA (Windows Media Audio), MP3 or MPEG-4 AAC file includes album art data, the album art can be displayed while the music files are playing. 0 If you use Ver.11 or later of Windows Media Player, the album art for WMA files can be displayed.
Contents Connections Playback Settings Tips Appendix Listening to Pandora® ZONE SELECT MAIN ONLINE MUSIC Pandora is an automated music recommendation and Internet Radio service created by the Music Genome Project. To listen to Pandora you will need a free Pandora account. If you do not have a Pandora account, you can create one at www.pandora.com or from the Pandora smartphone application. Playback of Pandora in this unit requires the Pandora account to be linked to the unit.
Contents Connections Playback Settings 4 Listening to Pandora® 1 Appendix If you have a Pandora account, use ui to select “I have a Pandora account”, then press ENTER. 0 If you do not have a Pandora account, to select “I am to new to Prepare for playback. Pandora”, then press ENTER. The URL of Pandora and activation code are displayed. Access the Pandora web page from your PC and register the displayed activation code and account information. Then press ENTER.
Contents 5 Connections Playback Settings Tips Input “Email address” and “Password”. 0 For character input, see “Using the keyboard screen” (v p. 172). 0 Press BACK to cancel the input. When “Cancel input?” is displayed, select “Yes”, then press ENTER. After inputting the “Email address” and “Password”, select “OK”, then press ENTER. If the “Email address” and “Password” match, the top menu for Pandora is displayed. My Station [1/4] New Station Shuffle Music1 Radio Sign Out OPTION Option .
Contents Connections Playback Settings Creating a new station Operation buttons You can create up to 100 radio stations. 1 2 Use ui to select “New Station”, then press ENTER. Input a track or artist name, then press “OK”.
Contents Connections Playback Settings Tips Listening to an existing station 1 Use ui and select the radio station that you want to listen to, then press ENTER. 0 You can skip up to 6 tracks that are being played back within 1 hour. Listening to created radio stations at random 1 Use ui to select “Shuffle”, then press ENTER. Created radio stations are selected at random, and tracks are streamed.
Contents Connections Playback Settings Giving feedback and managing stations Press p while a track is playing. The Pandora menu screen is displayed. I like this track : Press when you like the track that is being played. Playback a favorite track. Display the E (Thumbs up) icon. I don’t like this track : Press when you don’t like the track that is being played. Delete that track from the radio station. Display the D (Thumbs down) icon.
Contents Connections Playback Settings Tips Sign Out Disassociate this unit from your Pandora account. 1 2 Use ui to select “Sign Out”, then press ENTER. When the popup menu appears, use o p to select “Yes”, then press ENTER. o Operations accessible through the option menu 0 “Registering to Favorites (Save to Favorites)” (v p. 129) 0 “Adjusting the volume of each channel to match the input source (Channel Level Adjust)” (v p. 133) 0 “Adjusting the tone (Tone)” (v p.
Contents Connections Playback Settings Tips Appendix Listening to SiriusXM Internet Radio ZONE SELECT MAIN ONLINE MUSIC You can access SiriusXM to enjoy access to a wide range of unique content. An All Access package lets you listen to SiriusXM on your computer, smartphone, tablet or Lynx Portable. For details, see the SiriusXM homepage. http://www.siriusxm.
Contents Connections Playback Settings Listening to SiriusXM Internet Radio 3 Over 155 channels commercial-free music, plus play-by-play sports, exclusive talk, comedy and entertainment. 2 Appendix Use uio p to select “SiriusXM”, then press ENTER. Online Music Prepare for playback. Favorites A Check the network environment, then turn on this unit’s power. (“Connecting to a home network (LAN)” (v p. 76)) B Access the following website from your PC and obtain a SiriusXM account. http://www.
Contents 7 8 Connections Playback Settings Disassociate this unit from your SiriusXM account. Use ui to select the file, then press ENTER. 1 2 The selected file is displayed. 1/3 ENTER CH/PAGE d f Appendix Sign Out Use ui to select the genre, then press ENTER. Operation buttons Tips Function Playback / Stop Use ui to select “Sign Out”, then press ENTER. When the popup menu appears, use o p to select “Yes”, then press ENTER.
Contents Connections Playback Settings Tips Appendix AirPlay function Music files stored on your iPhone, iPod touch, iPad or iTunes can be played on this unit via the network. PC Router . 0 X is displayed on the menu screen while AirPlay is being operated. 0 Source input will be switched to “Online Music” when AirPlay playback is started. 0 You can stop AirPlay playback by pressing o or choosing other input source. 0 To see song and artist names together, press STATUS on the main unit.
Contents Connections Playback Settings 1 If you update your “iPhone/iPod touch/iPad” to iOS 4.2.1 or later, you can stream music stored in your “iPhone/iPod touch/iPad” directly to this unit. 2 Connect your iPhone, iPod touch or iPad Wi-Fi to the same network as this unit. 0 For details, see your device’s manual. 2 Install iTunes 10, or later, on a Mac or Windows PC that is connected to the same network as this unit. Turn this unit ON. Set “Network Control” to “Always On” for this unit. (v p.
Contents Connections Playback Settings Selecting multiple speakers (devices) Appendix Perform iTunes playback operations with the remote control unit of this unit It is possible to play iTunes songs on your home’s AirPlay compatible speakers (devices) other than those of this unit. 1 2 Tips With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. Click the AirPlay icon ' and select “Multiple”. 1 2 3 Check the speakers you want to use.
Contents Connections Playback Settings Tips Appendix Spotify Connect function Spotify is the world’s most popular streaming service. If you subscribe to Spotify Premium, you can control your new speaker with your phone or tablet. Because Spotify is built-in to your speaker, you can still take calls or use other apps - the music never stops. For information on how to set up and use Spotify Connect please visit www.spotify.
Contents Connections Playback Settings Tips Appendix Convenience functions 0 This section explains how to use convenient functions that can be used for each input source. MAIN ONLINE MUSIC ZONE SELECT MAIN 0 These functions can only be set in the MAIN ZONE.
Contents Connections Playback Settings Tips Performing random playback Performing repeat playback n Supported input sources: USB / Media Server / Bluetooth n Supported input sources : USB / Media Server / Bluetooth 1 1 2 3 While content is playing, press OPTION. The option menu screen is displayed. 4 2 3 Use ui to select “Repeat”, then press ENTER. Use o p to select repeat playback mode. Off (Default): Appendix Repeat playback mode is canceled.
Contents Connections Playback Settings Registering to Favorites (Save to Favorites) 1 2 n Supported input sources : Internet Radio / Media Server / Pandora / SiriusXM Press ONLINE MUSIC. Use uio p to select “Favorites”, then press ENTER. While content is playing, press OPTION. Online Music The option menu screen is displayed. Favorites Use ui to select “Save to Favorites”, then press ENTER.
Contents Connections Playback Settings Deleting content added to favorites 1 2 3 Appendix Searching content with keywords (Text Search) Press ONLINE MUSIC. Use uio p to select “Favorites”, then press ENTER. n Supported input sources : USB / Internet Radio / Media Server Use ui to select the content you want to delete from favorites, then press OPTION. 1 The option menu screen is displayed. 4 Tips 2 Use ui to select “Remove from Favorites”, then press ENTER.
Contents Connections Playback Settings Tips Appendix Playing back music and a favorite picture at the same time (Slideshow) n Supported input sources : USB n Supported input sources : Internet Radio / Media Server 1 1 Play back a still picture. 0 Playing back still pictures stored on USB memory devices. (v p. 89) 2 3 4 2 Play back a music file. (v p. 89) 0 Play back still pictures stored on Media Server. (v p. 109) Play back a music file of Media Server or Internet Radio station.
Contents Connections Playback Settings Setting the Slideshow Interval Tips 0 The “Slideshow Interval” settings are reflected for all input sources. Set the playback interval when playing back a slideshow of still picture (JPEG) files stored on a USB memory device or media server. n Supported input sources: USB / Media Server 1 2 3 4 While the list is displayed, press OPTION. The option menu screen is displayed. Use ui to select “Slideshow Interval”, then press ENTER.
Contents Connections Playback Settings Adjusting the volume of each channel to match the input source (Channel Level Adjust) 2 Press OPTION. The option menu screen is displayed. Use ui to select “Channel Level Adjust”, then press ENTER. The “Channel Level Adjust” screen is displayed. 3 4 Use ui to select the channel that you wish to adjust. Use o p to adjust the volume. –12.0 dB – +12.0 dB (Default : 0.0 dB) 5 Use uio p to select “Exit”, then press ENTER.
Contents Connections Playback Settings Adjusting the tone (Tone) 4 Adjusts the tonal quality of the sound. 1 2 3 Press OPTION. The option menu screen is displayed. 5 Use ui to select “Tone”, then press ENTER. The “Tone” screen is displayed. Tips Appendix Select “On” in step 3 and press i to select the sound range to be adjusted. Bass: Adjust bass. Treble: Adjust treble. Use o p to adjust the tone, then press ENTER.
Contents Connections Playback Settings Displaying your desired video during audio playback (Video Select) 4 5 This unit can display video from a different source on TV during audio playback. You can set this for each input source. n Supported input sources: iPod/USB / CDz / Tuner / Online Music / Bluetooth / Phono Tips If you selected “On” in step 3, press i and select “Source”. Use o p to select the input source for video you want to play back, then press ENTER.
Contents Connections Playback Settings Adjusting the picture quality for your viewing environment (Picture Mode) 3 n Supported input sources : CBL/SAT / DVD / Blu-ray / Game / AUX1 / AUX2 / Media Player / iPod/USB / Online Music / CDz / TV Audioz z You can set the picture mode when an HDMI, component video or video is assigned. 1 2 Press OPTION during video playback. The option menu screen is displayed. Use ui to select “Picture Mode”, then press ENTER. 4 Tips Use o p to select picture mode.
Contents Connections Playback Settings 1 You can play back the music being played back in MAIN ZONE simultaneously in ZONE2 (separate room). It is useful when you want to enjoy the same music at the same time in multiple rooms during home party or when you want to play back the same BGM in the entire house. 2 3 Appendix o Stopping the All Zone Stereo mode Playing the same music in all zones (All Zone Stereo) 1 Tips During playback in All Zone Stereo mode, press OPTION.
Contents Connections Playback Settings Tips Appendix Selecting a sound mode ZONE SELECT MAIN This unit allows you to enjoy various kinds of surround and stereo playback modes. Disc formats such as Blu-ray Disc and DVD, as well as being supported by digital broadcasting, and even by streaming movies and music from internet-based subscription services. This unit supports playback of almost all of these multi-channel audio formats.
Contents Connections Playback Settings 0 Press MOVIE, MUSIC or GAME to display a list of the sound modes that can be selected. Each time you press MOVIE, MUSIC or GAME, the sound mode changes. 0 While the list is displayed, you can also use ui to select a sound mode. 0 Try out various sound modes and enjoy sound mode in your favorite mode. GExampleH When MOVIE is pressed Press MOVIE, MUSIC or GAME to select a sound mode. MOVIE : Switches to the sound mode suitable for enjoying movies and TV programs.
Contents Connections Playback Settings Appendix Pure Direct playback Direct playback This mode is for playback with higher sound quality than in Direct playback mode. This mode turns off the main unit display and analog video circuit. Doing so suppresses noise sources that affect sound quality. Sound recorded in source is played as is. 1 Tips Press PURE to select “Direct”. Direct playback begins. 1 0 While DSD signals are played back, “DSD Direct” is displayed.
Contents Connections Playback Settings Tips Auto surround playback This mode detects the type of input digital signal, and automatically selects the corresponding mode for playback. Perform stereo playback when the input signal is PCM. When the input signal is Dolby Digital or DTS, the music is played back according to the respective channel number. 1 Press PURE to select “Auto”. Auto surround playback begins. 0 This can also be set by pressing PURE DIRECT on the main unit.
Contents Connections Playback Settings Tips Appendix o Description of sound mode types Dolby sound mode Sound mode type Description Dolby Surround This mode uses Dolby Surround Upmixer to extend various sources to natural and realistic multi channels for playback. Use ceiling speakers such as top middle speakers to realize a three-dimensional sound field. Dolby Digital This mode can be selected when playing sources recorded in Dolby Digital.
Contents Connections Playback Settings Tips Appendix DTS sound mode Sound mode type Description DTS Surround This mode can be selected when playing sources recorded in DTS. DTS ES Dscrt6.1z This mode is suitable for playing discs recorded in DTS-ES. The surround back channel added using the discrete method is played as an independent channel. Since all channels are independent, the 360-degree spacial expressiveness and sound localization are enhanced. DTS ES Mtrx6.
Contents Connections Playback Settings Tips Appendix PCM multi-channel sound mode Sound mode type Multi Ch In Description This mode can be selected when playing multi-channel PCM/DSD sources. Original sound mode Sound mode type Description Multi Ch Stereo This mode is for enjoying stereo sound from all speakers. Virtual This mode lets you experience an expansive surround sound effect when playing back through just the front (L/R) speakers only, and when listening with stereo headphones.
Contents Connections Playback Settings Tips Appendix Stereo sound mode Sound mode type Stereo Description This mode plays 2-channel stereo audio with no additional surround sound processing. 0 Sound is output from the front left and right speakers, and subwoofer if connected. 0 When multi-channel signals are inputted, they are mixed down to 2-channel audio and are played back with no additional surround sound processing.
Contents Connections Playback Settings Tips Appendix o Sound mode that can be selected for each input signal 0 The following sound modes can be selected using the MOVIE, MUSIC and GAME buttons. . 0 Adjust the sound field effect with the menu “Surround Parameter” to enjoy surround sound the way you like it. (v p.
Connections Playback Settings Tips Appendix .
Connections Playback Settings Tips Appendix . Contents DTS-HD / DTS Express DTS:X PCM multi-channel Multi-channel z3 GAME button MOVIE button MUSIC button DTS-HD HI RES S S S DTS-HD MSTR S S S Sound mode Input signal DTS Express S S S DTS-HD + Neural:X S S S DTS:X S S S DTS:X MSTR S S S Multi Ch In S S S Multi Ch In 7.
Contents Connections Playback Settings Tips o Views on the display q . w A Shows a decoder to be used. 0 In the case of the Dolby Digital Plus decoder, “y” is displayed. B Shows a decoder that creates sound output. 0 “k” indicates that the Dolby Surround decoder is being used.
Contents Connections Playback Settings Tips Appendix HDMI control function A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with another device via the HDMI cable connection. Setting procedure 1 2 3 5 Enable the HDMI control function of this unit. Set “HDMI Control” to “On”. (v p. 189) Turn the power on for all the devices connected by HDMI cable.
Contents Connections Playback Settings Tips Appendix Smart Menu function This function can be used to configure the settings of this unit, select an input source and set Tuner and Internet Radio stations using the TV remote control. 2 3 Enjoy content from the input source currently selected on this unit. o Source Enable the HDMI control function of this unit and the TV. (v p. 189) Switch the input of this unit.
Contents Connections Playback Settings Tips o Setup Menu Displays a setup menu for configuring the settings of this unit. o Smart Select Calls up the SMART SELECT items registered to this unit. NOTE 0 If the “HDMI Control” or “Smart Menu” settings have been changed, always reset the power to connected devices after the change. 0 The Smart Menu function may not work properly depending on the specifications of your TV. In this case, set “Smart Menu” to “Off”. (v p.
Contents Connections Playback Settings Tips Appendix Sleep timer function MAIN ZONE2 ZONE SELECT MAIN You can have the power automatically switched to standby once a set time has elapsed. This is convenient for viewing and listening while going to sleep. The sleep timer function can be set for each zone.
Contents Connections Playback Settings Press SLEEP when the sleep timer is in operation. The remaining time appears on the display. Press MAIN or ZONE2 to select the operating zone with the remote control. o To cancel the sleep timer The button for the selected zone is lit. 2 Appendix o Checking the remaining time Using the sleep timer 1 Tips Press SLEEP to select “Off”. The sleep timer indicator on the display turns off. Press SLEEP and display the time you want to set.
Contents Connections Playback Settings Tips Appendix Smart select function ZONE SELECT MAIN Settings such as the input source, volume level and sound mode can be registered to the SMART SELECT 1 - 4 buttons. You can simply press one of the registered SMART SELECT buttons in subsequent playbacks to switch to the group of saved settings in a batch. By saving frequently used settings at the SMART SELECT 1 – 4 buttons, you will always be able to easily call up the same playback environment.
Contents Connections Playback Settings Tips Calling up the settings 1 2 Press MAIN or ZONE2 to select the operating zone with the remote control. The button for the selected zone is lit. Press SMART SELECT. The Smart Select settings registered to the button you pressed are called up. 0 The default settings for the input source and volume are as shown below.
Contents Connections Playback Settings Changing the settings 1 2 Tips Press MAIN or ZONE2 to select the operating zone with the remote control. The button for the selected zone is lit. Set the items below to the settings you want to register. 3 The following settings from A to H can be memorized for MAIN ZONE, and settings A and B can be memorized for ZONE2. A Input source (v p. 82) B Volume (v p. 83) C Sound mode (v p.
Contents Connections Playback Settings Tips Appendix Web control function You can control this unit from a web control screen on a web browser. PC Router Controlling the unit from a web control 1 This unit 2 Switch the “Network Control” setting to “Always On”. (v p. 236) Check the IP address of this unit with “Information”. (v p. 230) Network/Information Friendly Name DHCP Connection IP Address MAC Address Marantz SR6011 On Wired (Ethernet) 192.168.100.19 zzzzzz-000000 Checking the IP address.
Contents Playback Settings 5 Enter the IP address of this unit in browser’s address box. For example, if the IP address of this unit is “192.168.100.19”, enter “http://192.168.100.19”. Tips When the top menu is displayed, click on the menu item you want to operate. Setup Menu MAIN ZONE CBL/SAT Audio http://192.168.100.19 File Edit View Appendix Video Favorites Tools Help ZONE2 CBL/SAT Inputs . Speakers Network General Save Load .
Contents Connections Playback Settings Tips Appendix Panel lock function To prevent accidental operation of this unit, you can disable operation of the buttons on the front panel. X M-DAX DIMMER Disabling all key button operations 1 STATUS 2 . 3 TUNER PRESET CH – 2 3 Display Rear panel Use TUNER PRESET CH + or TUNER PRESET CH - to select “P/V LOCK On”. Press STATUS to enter the setting. All button operations except X are disabled.
Contents Connections Playback Settings Tips Canceling the Panel lock function 1 2 Press X while you press and hold M-DAX and DIMMER with the unit in standby mode. Press TUNER PRESET CH + or TUNER PRESET CH - to select “FP LOCK zOff”. (z The currently set mode.) 3 Press STATUS to enter the setting. The Panel lock function is canceled. 0 Even when the Panel lock function is set, you can operate the unit using the remote control unit.
Contents Connections Playback Settings Tips Appendix Remote lock function When connecting an IR receiver, enable the Remote lock function. When the function is enabled, you can not perform operations with the remote control unit. By default, this function is disabled. X M-DAX DIMMER Disabling the sensor function of the remote control unit 1 STATUS 2 . 3 TUNER PRESET CH – Press X while you press and hold M-DAX and DIMMER with the unit in standby mode.
Contents Connections Playback Settings Tips Appendix Playback in ZONE2 (Separate room) You can operate this unit to enjoy video and audio in a room (ZONE2) that is different from the room where this unit is placed (MAIN ZONE). You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can also play back separate sources in the MAIN ZONE and ZONE2. Connecting ZONE2 You can use the following three methods to play back video and audio in ZONE2.
Contents Connections Playback Settings o Connection 2: Connecting using a speaker output terminal Tips Appendix o Connection 3 : Connection using an external amplifier (ZONE2) When “Assign Mode” is set to “ZONE2” in the menu, ZONE2 audio is output from the SURROUND BACK speaker terminal. (v p. 215) The audio signals of this unit’s ZONE2 audio output connectors are output to the ZONE2 amplifiers and played on these amplifiers.
Contents Connections Playback Settings Playback in ZONE2 1 Tips Appendix Press ZONE2 to set the operating zone to ZONE2 with the remote control. The ZONE2 button lights. ZONE SELECT ZONE2 Input source select buttons MAIN POWER SLEEP ZONE 2 CBL/SAT DVD Blu-ray GAME AUX1 MEDIA PLAYER TV AUDIO AUX2 TUNER iPod/USB CD Bluetooth ONLINE MUSIC PHONO INTERNET RADIO 2 POWER X 3 MUTE : VOLUME MUTE INFO Press the input source select button to select the input source to be played.
Contents Connections Playback Settings Tips o Adjusting the volume (ZONE2) Use VOLUME df to adjust the volume. ”. 0 At time of purchase, “Volume Limit” is set to “70（–10 dB） (v p. 242) 0 Turn VOLUME after pressing ZONE2 SOURCE on the main unit to adjust the volume. o Turning off the sound temporarily (Muting) (ZONE2) Press MUTE :. The sound is reduced to the level set at “Mute Level” in the menu. (v p. 243) 0 To cancel mute, either adjust the sound volume or press MUTE : again.
Contents Connections Playback Settings Tips Appendix Menu map When using menu operations, connect this unit to a TV and operate this unit while viewing the TV. The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences. Detailed items Description Page Dialog Level Adjust This setting adjusts the output level to clarify the dialogue output from the center channel.
Contents . Setting items Inputs Connections Playback Settings Detailed items Tips Appendix Description Page Input Assign Changes input connector assignment. 199 Source Rename Changes the display name for input source. 201 Hide Sources Removes from the display input sources that are not used. 202 Source Level Adjusts the playback level of the audio input. 202 Input Select Sets the audio input mode.
Contents Connections . Setting items General Playback Settings Detailed items Tips Description Page Language Changes the language of the display on the TV screen. 238 ECO Configures the ECO Mode and Auto Standby energy-saving functions. 238 ZONE2 Setup Makes settings for audio playback with ZONE2. 241 Zone Rename Changes the display title of each zone to one you prefer. 243 Smart Select Names Changes the Smart Select Name display title to one you prefer.
Contents Connections Playback Settings Tips Appendix Menu operations MAIN ZONE SELECT MAIN POWER CBL/SAT 1 SLEEP ZONE 2 DVD Blu-ray GAME AUX1 MEDIA PLAYER TV AUDIO AUX2 TUNER iPod/USB CD Bluetooth ONLINE MUSIC PHONO INTERNET RADIO The MAIN button lights. 2 3 ECO CH / PAGE VOLUME MUTE INFO uio p ENTER 4 5 OPTION ENTER BACK SETUP BACK TUNE - TUNE Press MAIN on the remote control unit to set the operating zone to the MAIN ZONE. Press SETUP.
Contents Connections Playback Settings Tips Inputting characters On this unit, you can change the name displayed on the following screens to the names that you prefer. 0 Preset Name (v p. 102) 0 Text Search (v p. 130) 0 Source Rename (v p. 201) 0 Friendly Name (v p. 236) 0 Zone Rename (v p. 243) 0 Smart Select Names (v p.
Contents Connections Playback Settings Tips Appendix Using the keyboard screen 1 3 Display the screen for inputting characters. GExampleH “Source Rename” screen Inputs/Source Rename CBL/SAT Insert Delete A B C D E F G H N O P Q R S I J K L M T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ! $ % & < = > a/A 4 CBL/SAT Clear ‘ ( ) * + Space , ; Cancel “ 5 6 # O K Select a character to be input with uio p then press ENTER. Repeat steps 2 - 4 to change the name.
Contents Connections Playback Settings Tips Appendix Audio Make audio-related settings. Dialog Level Adjust Subwoofer Level Adjust This setting adjusts the output level to clarify the dialogue output from the center channel. This setting adjusts the volume level for the subwoofer. o Subwoofer Level Adjust o Dialog Level Adjust Set whether to adjust the subwoofer level. Set whether to adjust the dialog level or not. On: Enables the adjustment of the dialog level.
Contents Connections Playback Settings Tips Appendix o Loudness Management Surround Parameter This sets whether to output as specified in “Dynamic Compression” or output directly without compressing the dynamic range of audio recorded in the disc. You can adjust the surround audio sound field effects to match your preferences. The items (parameters) that can be adjusted depend on the signal being input and the currently set sound mode.
Contents Connections Playback Settings Tips Appendix o Low Frequency Effects o Dynamic Compression Adjust the low frequency effects level (LFE). Compress dynamic range (difference between loud and soft sounds). Auto: Automatic dynamic range compression on/off control according to source. Low / Medium / High: These set the compression level. Off: Dynamic range compression is always off. n When “Input Mode” is set other than to “7.
Contents Connections Playback Settings o Center Spread Tips Appendix o Speaker Select Center spread expands the center channel signal to left and right front speakers to create a wider frontal audio image for the listener. It is optimized and designed primary for playback of stereo music content. On: Use “Center Spread”. Off (Default): Do not use “Center Spread”. Makes settings for the speakers outputting sound. Floor (Default): Plays back without height speakers.
Contents Connections Playback Settings o Subwoofer On (Default): The subwoofer is used. Off: The subwoofer is not used. Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The “M-DAX” function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression.
Contents Connections Playback Settings Tips Appendix Audio Delay 0 The M-DAX indicator lights. 0 This item can be set with analog signals or PCM signal (Sample Rate = 44.1/48 kHz) is input. 0 This item default setting for “Online Music”, “iPod/USB” and “Bluetooth” is “Low”. All others are set to “Off”. 0 This cannot be set when the sound mode is set to “Direct” or “Pure Direct”. 0 This cannot be set when the input mode is set to “7.1CH IN”. 0 “M-DAX” settings are stored for each input source.
Contents Connections Playback Settings Tips Appendix o Power On Level Volume Define the volume setting that is active when the power is turned on. Set the MAIN ZONE (room where the unit is located) volume setting. Last (Default): Use the memorized setting from the last session. Set how volume is displayed. Mute: 0 - 98 (Default): Always use the muting on condition when power is turned on. Display in the range 0 (Min) to 98. 1 – 98 (–79 dB – 18 dB) : The volume is adjusted to the set level.
Contents Connections Playback Settings Tips Appendix o MultEQ® XT32 Audyssey® MultEQ® XT32 compensates for both time and frequency characteristics of the listening area based on Audyssey® Setup measurement results. Selection is done from three types of compensation curves. We recommend the “Reference” setting. Set Audyssey MultEQ® XT32, Audyssey Dynamic EQ®, Audyssey Dynamic Volume® and Audyssey LFC™. These can be selected after Audyssey® Setup has been performed.
Contents Connections Playback Settings o Dynamic EQ Tips Appendix o Reference Level Offset Solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Works with MultEQ® XT32. On (Default): Use Dynamic EQ. Off: Do not use Dynamic EQ. Audyssey Dynamic EQ® is referenced to the standard film mix level. It makes adjustments to maintain the reference response and surround envelopment when the volume is turned down from 0 dB.
Contents Connections Playback Settings o Dynamic Volume Tips Appendix o Audyssey LFC™ Solves the problem of large variations in volume level between TV, movies and other content (between quiet passages and loud passages, etc.) by automatically adjusting to the user’s preferred volume setting. Heavy: Most adjustment to softest and loudest sounds. Medium: Medium adjustment to loudest and softest sound. Light: Least adjustment to loudest and softest sounds.
Contents Connections Playback Settings Tips o Speaker Selection Graphic EQ Select whether to adjust tones for individual speakers or for all speakers. Uses the graphic equalizer to adjust the tone of each speaker. 0 Speakers for which “Graphic EQ” can be set differ according to the sound mode. 0 This can be set when the “MultEQ® XT32” setting is “Off”. (v p. 180) 0 This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.
Contents Connections Playback Settings o Adjust EQ Tips Appendix o Curve Copy Adjust tonal balance for each frequency band. Copy the Flat correction curve created in the Audyssey® Setup. 1. Select the speaker. 2. Select the adjustment frequency band. 63 Hz / 125 Hz / 250 Hz / 500 Hz / 1 kHz / 2 kHz / 4 kHz / 8 kHz / 16 kHz 3. Adjust the level. –20.0 dB – +6.0 dB (Default : 0.0 dB) 0 “Curve Copy” is displayed after Audyssey® Setup has been performed.
Contents Connections Playback Settings Tips Appendix Video Make video-related settings. o Picture Mode Picture Adjust Select the desired picture mode according to the video content and your viewing environment. Picture quality can be adjusted. 0 Can be set when the “Video Conversion” setting is “On”. (v p. 194) 0 Can be set when “HDMI”, “COMP” or “VIDEO” is assigned for each input source. (v p.
Contents Connections Playback Settings Tips o Contrast Adjust picture contrast. 0 The two special adjustment modes, ISF Day and ISF Night, should be used by a certified technician to adjust the color calibration to match the installation conditions. We recommend that the settings and adjustments be carried out by an ISFcertified technician. 0 These settings can also be configured using “Picture Mode” in the option menu. (v p. 185) 0 The default settings are as follows.
Contents Connections Playback Settings o Noise Reduction Tips Appendix HDMI Setup Reduce overall video noise. Make settings for HDMI audio output, HDMI Pass Through and HDMI Control settings. Low / Medium / High / Off (Default : Off) NOTE o Enhancer 0 When “HDMI Pass Through” and “HDMI Control” is set to “On”, it consumes more standby power. (“HDMI Pass Through” (v p. 188), “HDMI Control” (v p.
Contents Connections Playback Settings o HDMI Pass Through Tips Appendix o Pass Through Source Selects how this unit will transmit HDMI signals to the HDMI output in standby power mode. On (Default): Transmits the selected HDMI input through the AV receiver’s HDMI output when this unit is in standby power mode. Off: No HDMI signals are transmitted through this unit’s HDMI output in standby power mode. Sets the HDMI connector that inputs HDMI signals when in standby.
Contents Connections Playback Settings o RC Source Select Tips Appendix o HDMI Control Set whether to allow this unit to be turned on by the input source select button on the remote control when this unit is on standby. You can link operations with devices connected to HDMI and compatible with HDMI Control. Power On + Source (Default): The power of this unit is turned on and the input source changes. On: Use HDMI control function. Do not use HDMI control function.
Contents Connections Playback Settings o ARC Tips Appendix o TV Audio Switching On the TV connected to the HDMI MONITOR connector, set whether to receive sound from the TV via HDMI. Sets automatic switching to the “TV Audio” input when a TV connected via HDMI sends an appropriate CEC control command to the AVR. On: Use ARC function. Off (Default): Do not use ARC function. On (Default): Select the “TV Audio” input automatically when receiving a command from the TV.
Contents Connections Playback Settings o Power Off Control Appendix o Power Saving Links the power standby of this unit to external devices. All (Default): If power to a connected TV is turned off independently of the input source, power to this unit is automatically set to standby. Video: With an input source being selected that is assigned either “HDMI”, “COMP” or “VIDEO”, when you turn the power of the TV off, power to this unit is automatically set to standby. (v p.
Contents Connections Playback Settings Tips o Smart Menu This function can be used to configure the settings of this unit, select an input source and set Tuner and Internet Radio stations using the TV remote control. On: Use Smart Menu function. Off: Do not use Smart Menu function. 0 “Smart Menu” can be set when “HDMI Control” is set to “On”. (v p. 189) NOTE 0 If the “Smart Menu” settings have been changed, always reset the power to connected devices after the change.
Contents Connections Playback Settings Tips Appendix o Video Mode Output Settings Configure the video processing method to match the type of video content. Makes settings for video output. 0 Can be set when “HDMI”, “COMP” or “VIDEO” is assigned for each input source. (v p. 200) 0 “Resolution”, “Progressive Mode” and “Aspect Ratio” can be set when “i/p Scaler” is set to anything other than “Off”. (“Resolution” (v p. 195), “Progressive Mode” (v p. 196), “Aspect Ratio” (v p.
Contents Connections Playback Settings o Video Conversion Appendix o i/p Scaler The input video signal is converted automatically in conjunction with the connected TV. (v p. 277) On (Default): The input video signal is converted. Off: The input video signal is not converted. Front panel Tips Display Rear panel Set the video input signal to be subjected to i/p scaler processing. i/p Scaler will convert the resolution of the input video signal to the value set in “Resolution”. (v p.
Contents Connections Playback Settings Use i/p scaler function. Off: Do not use i/p scaler function. Appendix o Resolution n When the input source is set to “iPod/USB” and “Online Music” On (Default): Tips Set the output resolution. You can set “Resolution” separately for HDMI output of the analog video input and HDMI input. 0 “Analog & HDMI” can be set for input sources for which an HDMI input connector is assigned.
Contents Connections Playback Settings o Progressive Mode Tips Appendix o Aspect Ratio Set an appropriate progressive conversion mode for the source video signal. Auto (Default): The video signal is automatically detected and the appropriate mode is set. Video: Select mode suitable for video playback. Video and Film: Select mode suitable for video and 30frame film material playback. Set the aspect ratio for the video signals output to the HDMI. 16:9 (Default): Output at 16:9 aspect ratio.
Contents Connections Playback Settings Tips Appendix o Now Playing On Screen Display Select the on-screen display user interface preferences. Sets the display time for the playback display when the input source is “Online Music”, “iPod/USB”, “Bluetooth” or “Tuner”. o Volume Always On (Default): Show display continuously. Auto Off: Show display for 30 seconds after operation. Sets where to display the volume level. Bottom (Default): Top: Off: Display at the bottom. Display at the top.
Contents Connections Playback Settings Tips TV Format Set the video signal format to be output for the TV you are using. o Format NTSC (Default): Select NTSC output. PAL: Select PAL output. 0 “Format” can also be set by the following procedure. However, the menu screen is not displayed. Following the display content to make the setting. 1. Press and hold the main unit’s ZONE2 SOURCE and STATUS at the same time for at least 3 seconds. “Video Format ” appears on the display. 2.
Contents Connections Playback Settings Tips Appendix Inputs Perform settings related to input source playback. You do not have to change the settings to use the unit. Make settings when needed. Input Assign 0 By default, each item is set as follows. By making connections as indicated by the input sources printed on the audio/video input connectors of this unit, you can just press one of the input source select buttons to easily play back audio or video from a connected device.
Contents Connections Playback Settings o HDMI Tips Appendix o ANALOG Set this to change the HDMI input connectors assigned to the input sources. Set this to change the analog audio input connectors assigned to the input sources. 1/2/3/4/5/6/7/ Front: Assign an HDMI input connector to the selected input source. 1 / 2 / 3 / 4 / 5 / Front: –: Do not assign an HDMI input connector to the selected input source.
Contents Connections Playback Settings o VIDEO –: Appendix Source Rename Set this to change the composite video input connectors assigned to the input sources. 1 / 2 / 3 / Front: Tips Change the display name for input source. This is convenient when the name of your device and the input source name of this unit are different. You can change the name to suit your needs. When the renaming is completed, the name is displayed on this unit’s display and on the menu screen.
Contents Connections Playback Settings Hide Sources Appendix Source Level Remove from the display input sources that are not used. Show (Default): Use this source. Hide: Do not use this source. This function corrects the playback level of the selected input source’s audio input. Make this setting if there are differences in the input volume levels between the different sources. -12 dB – +12 dB (Default : 0 dB) 0 The “Bluetooth” function can be disabled by setting Bluetooth to “Hide”.
Contents Connections Playback Settings Tips Input Select Set the audio input mode of each input source. The input modes available for selection may vary depending on the input source. 0 “Input Select” settings are stored for each input source. o Input Mode Set the audio input modes for the different input sources. It is normally recommended to set the audio input mode to “Auto”. Auto (Default): Automatically detect input signal and perform playback. HDMI: Play only signals from HDMI input.
Contents Connections Playback Settings Tips Appendix Speakers The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey® Setup”. You do not have to perform Audyssey® Setup when you have already performed “Speaker Calibration” in “Setup Assistant”. To set up the speakers manually, use “Manual Setup” on the menu. (v p.
Contents Connections Playback Settings o About the main listening position 0 Make the room as quiet as possible. Background noise can disrupt the room measurements. Close windows and turn off the power on electronic devices (radios, air conditioners, fluorescent lights, etc.). The measurements could be affected by the sounds emitted by such devices. 0 During the measurement process, place cell phones outside the listening room. Cell phone signals could disrupt the measurements.
Contents Connections Playback Settings Procedure for speaker settings (Audyssey® Setup) 1 Tips Appendix Attach the Sound calibration microphone to the supplied microphone stand or own tripod and install it at the main listening position. When installing the Sound calibration microphone, point the tip of the microphone toward the ceiling and adjust the height to match the height of the ears of a listener in a seated position.
Contents Playback Settings 4 Connect the Sound calibration microphone to the SETUP MIC jack of this unit. When the Sound calibration microphone is connected, the following screen is displayed. . Audyssey Setup Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the included microphone and microphone stand. Set the following items if necessary. 5 Amp Assign Channel Select Dolby Speaker Setup Tips Select “Start”, then press ENTER.
Contents Playback Settings 7 When the following screen is displayed, select “Begin Test” and then press ENTER. Start the measurement of the first position. Tips Appendix When the detected speaker is displayed, select “Next” and then press ENTER. Audyssey Setup Speaker Detection Audyssey Setup Select “Begin Test” to start the calibration. NOTE: You will hear a series of loud chirps starting and stopping during the tests. Front Center Subwoofer Surround Surr.
Contents Playback Settings 9 Move the Sound calibration microphone to position 2, select “Continue”, then press ENTER. The measurement of the second position starts. Measurements can be made in up to eight positions. Tips Appendix Repeat step 8, measuring positions 3 to 8. 0 To skip measuring the fourth and subsequent listening position, press o to select “Complete” and press ENTER to proceed to step 11.
Contents 11 Connections Playback Settings 12 Perform the settings for Audyssey Dynamic EQ® and Audyssey Dynamic Volume®. The following screen is displayed during the analysis. Configure the settings as preferred. Tips Appendix When the analysis and storage ends, unplug the Sound calibration microphone from the SETUP MIC jack on the main unit and then press “Next”. Audyssey Setup Now Analyzing and correcting the your room data. Please disconnect the microphone from your AV receiver.
Contents 13 Connections Playback Settings Tips Select “Details” and press ENTER to verify the measurement results. 0 Subwoofers may measure a greater reported distance than the actual distance due to added electrical delay common in subwoofers. NOTE 0 Do not change the speaker connection or subwoofer volume after Audyssey® Setup. If these are changed, run Audyssey® Setup again in order to configure the optimum equalizer settings.
Contents Connections Playback Settings Tips Appendix Error messages An error message is displayed if Audyssey® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Be sure to turn off the power before checking speaker connections. Examples Error details No speakers found.
Contents Connections Playback Settings o Subwoofer level error message and how to adjust 1 2 The optimal level of each subwoofer channel for Audyssey® Setup measurement is 75 dB. During subwoofer level measurement, an error message is displayed when one level of subwoofers is outside the 72 – 78 dB range. When using a subwoofer with built-in amplifier (active type), adjust the subwoofer volume so that the subwoofer level is within the 72 to 78 dB range.
Contents Connections Playback Settings Tips Retrieving Audyssey® Setup settings If you set “Restore...” to “Restore”, you can return to Audyssey® Setup measurement result (value calculated at the start by MultEQ® XT32) even when you have changed each setting manually. Audyssey Setup Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the included microphone and microphone stand. Set the following items if necessary.
Contents Connections Playback Settings Manual Setup Tips Appendix Amp Assign Select the power amplifier usage method to match your speaker system. Perform when setting the speakers manually or when changing settings made in Audyssey® Setup. 0 If you add or remove a speaker after performing Audyssey® Setup, you will no longer be able to select Audyssey MultEQ® XT32, Audyssey Dynamic EQ® or Audyssey Dynamic Volume®. (v p. 180) 0 “Manual Setup” can be used without changing the settings.
Contents Connections Playback Settings 0 Settings to assign all power amplifier 9.1ch: 5.1ch (Bi-Amp) + ZONE2: 0 You can connect speakers for up to 9.1- channels for MAIN ZONE. Speakers to output audio are automatically switched for playing back up to 7.1channels in accordance with the input signal and sound mode. 7.1ch + Front B: 0 Setting to assign the power amplifiers in Front panel this unit for front speaker bi-amp connection to 2-channels. 0 You can connect speakers for up to 9.
Contents Connections Playback Settings Tips Appendix o Height n Height Sp 0 When “Assign Mode” is set to “7.1ch + ZONE2”, “7.1ch (Bi-Amp)” or “7.1ch + Front B” in the menu, the assigned channels are output from HEIGHT2 speaker terminals. 0 When Assign Mode is set to “5.1ch (Bi-Amp) + ZONE2” in the menu, the front channels for Bi-Amp connection are output from HEIGHT1 speaker terminals, and the ZONE2 channels are output from HEIGHT2 speaker terminals.
Contents Connections Playback Settings Tips Appendix n Layout Select the height, ceiling, or Dolby Atmos Enabled speaker location. The layouts that can be selected differ depending on the combinations of “Assign Mode” and “Floor” - “Layout” in the menu. (“Assign Mode” (v p. 215), “Floor” - “Layout” (v p.
Contents Connections Playback Settings NOTE Height Speakers Dolby Speakers 2ch 2ch z1 None 4ch z1 Settings Layout Front Dolby & Top Rear Front Dolby & Rear Height Front Height & Surr.
Contents Connections Playback Settings o Pre-out Tips Appendix Speaker Config. When “Assign Mode” is set to “11.1ch”, selects the PRE OUT connect the external power amplifier used in MAIN ZONE. The PRE OUT connectors that can be selected differ depending on the combination of “Floor” - “Layout” and “Height” - “Layout” settings configured in the menu. Select whether or not speakers are present, playback capacity for low bass frequencies and speaker size.
Contents Connections Playback Settings Tips Appendix o Surround o Center Set the presence and size of the surround speakers. Set the presence and size of the center speaker. Large: Use a large speaker that can adequately play back very low bass frequencies. Large: Use a large speaker that can adequately play back very low bass frequencies. Small (Default): Use a small speaker that has inadequate playback capacity for very low bass frequencies.
Contents Connections Playback Settings o Surr. Back Tips Appendix o Front Height Set the presence, size and number of surround back speakers. Set the presence and size of the front height speakers. Large: Use a large speaker that can adequately play back very low bass frequencies. Large: Use a large speaker that can adequately play back very low bass frequencies. Small (Default): Use a small speaker that has inadequate playback capacity for very low bass frequencies.
Contents Connections Playback Settings Tips Appendix o Surround Dolby o Top Front Set the presence and size of the surround Dolby speakers. Set the presence and size of the top front speakers. Large: Use a large speaker that can adequately play back very low bass frequencies. Large: Use a large speaker that can adequately play back very low bass frequencies. Small (Default): Use a small speaker that has inadequate playback capacity for very low bass frequencies.
Contents Connections Playback Settings o Rear Height Use a large speaker that can adequately play back very low bass frequencies. Small (Default): Use a small speaker that has inadequate playback capacity for very low bass frequencies. None: Select when the rear height speakers are not connected. Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. o Unit Set the unit of distance.
Contents Connections Playback Settings o Set the distance Tips Appendix o Dolby Speaker Setup Set the distance between the Dolby Atmos Enabled speaker and the ceiling. 0.0 ft – 60.0 ft / 0.00 m – 18.00 m 3.0 ft - 11.0 ft / 0.90 m - 3.30 m (Default : 6.0 ft) 0 The speakers that can be selected differ depending on the “Amp Assign” and “Speaker Config.” settings. (“Amp Assign” (v p. 215), “Speaker Config.” (v p. 220)) 0 Default settings: Front L / Front R / F. Height L / F.
Contents Connections Playback Settings Tips Levels Set the volume of the test tone to be the same at the listening position when it is output from each speaker. o Test Tone Start A test tone is output from the selected speaker. While listening to the test tone, adjust the volume output from the selected speaker. –12.0 dB – +12.0 dB (Default : 0.0 dB) 0 The set “Levels” are reflected in all sound modes.
Contents Connections Playback Settings Tips Appendix o Set the crossover frequency Crossovers 40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 200 Hz / 250 Hz (Default : 80 Hz) Set in accordance with the lower limit frequency of the base frequencies that can be played back through each speaker. See the speaker manual for information concerning speaker crossover frequency.
Contents Connections Playback Settings Tips o LPF for LFE Bass Set LFE signal playback range. Set this when you want to change the playback frequency (low pass filter point) of the subwoofer. Set subwoofer and LFE signal range playback. o Subwoofer Mode 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 200 Hz / 250 Hz (Default : 120 Hz) Select low range signals to be reproduced by subwoofer.
Contents Connections Playback Settings Tips Front Speaker Set the front speaker A/B to use for every sound mode. A (Default): Front speaker A is used. B: Front speaker B is used. A+B : Both front speakers A and B are used. 0 This can be set when “Assign Mode” is set to “7.1ch + Front B”. (v p.
Contents Connections Playback Settings Tips Appendix Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On”. (Use the default setting.) This allows this unit to use your home network (LAN).
Contents Connections Playback Settings o Connect Using Appendix Wi-Fi Setup Select the method for connecting to the home network (LAN). Wired (Ethernet): Wireless (Wi-Fi) (Default): Tips Connect to a wireless LAN (Wi-Fi) router. The router can be connected in the following ways. Select the connection method to suit your home environment. Use a LAN cable to connect to a network. Use the wireless LAN (Wi-Fi) function to connect to a network.
Contents Connections Playback Settings Tips o WPS Router n When connecting using Wi-Fi Use a WPS-compatible router to connect. There are two ways to connect, using the push button method or the PIN code method. Select the connection method to match your router. 1. Select “Wireless connection” on the TV screen. 2. Check that your iOS device is connected to the wireless LAN (Wi-Fi) router and select “Marantz SR6011” from “SET UP NEW AIRPLAY SPEAKER...
Contents Connections Playback Settings Tips Appendix o Manual Enter the name (SSID) and password of the network you wish to connect to. 0 The wireless LAN (Wi-Fi) settings of this unit can also be configured from a PC or tablet that supports wireless LAN connection. 0 When using a device that has a firmware version of iOS 7 or later, “When connecting using Wi-Fi” (v p. 232) in “Use iOS Device”. 1. Set the following items. SSID: Input the name of the wireless network (SSID).
Contents Connections Playback Settings Tips o DHCP Settings Selects how to connect to the network. Configure the proxy settings and IP address. 0 If you are using a broadband router (DHCP function), the information required for network connection such as the IP address will be automatically configured since the DHCP function is set to “On” in the default settings of this unit.
Contents Connections Playback Settings o Default Gateway Tips o Port When connected to a gateway (router), input its IP address. Enter port number. o Primary DNS, Secondary DNS 0 If you cannot connect to the Internet, recheck the connections and settings. (v p. 76) 0 If you do not understand about Internet connection, contact your ISP (Internet Service Provider) or the store from which you purchased your computer.
Contents Connections Playback Settings Network Control Tips Appendix Friendly Name Enables network communication in standby power mode. Off In Standby: Suspend network function during standby. Always On (Default): Network is on during standby. Main unit operable with a network compatible controller. The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your preferences. o Friendly Name Selects Friendly Name from the list.
Contents Connections Playback Settings Checks whether this unit has access to the Internet (WAN). Used to check the network connection. OK o Physical Connection Error: Checks the physical LAN port connection. OK Failed to connect to the Internet. Check the Internet connection environment or router settings. The LAN cable is not connected. Check the connection. 0 When connected using a wireless LAN, “Connection be displayed.
Contents Connections Playback Settings Tips Appendix General Make various other settings. Language ECO Set the language for display the menu on the TV screen. Configure the settings of the ECO Mode and auto standby mode. English / Français / Español (Default : English) o ECO Mode This mode can reduce the power consumption when the power of the unit is on. 0 “Language” can also be set up by the following operation. However, the menu screen is not displayed.
Contents Connections Playback Settings o Power On Default Appendix o On Screen Display Set the mode to ECO when the power is on. Last (Default): The ECO Mode will be set to the previous setting before the power was switched off. On: When power is turned on, the mode will always be switched to the ECO Mode in “On”. Auto: When power is turned on, the mode will always be switched to the ECO Mode in “Auto”. Off: When power is turned on, the mode will always be switched to the ECO Mode in “Off”.
Contents Connections Playback Settings o Auto Standby Tips Appendix n ZONE2 When there are no operations for a certain period of time as set here, the power is automatically shut off even if there is audio or video input. Set so the unit power automatically switches to standby. n MAIN ZONE Sets the time for switching to auto standby when there are no audio or video signals input into this unit. Before the unit enters standby mode, “Auto Standby” is displayed on the unit display and the menu screen.
Contents Connections Playback Settings Tips o Lch Level ZONE2 Setup Adjust the left channel output level. Makes settings for audio playback with ZONE2. -12 dB – +12 dB (Default : 0 dB) o Rch Level 0 Values set for “Volume Limit” and “Power On Volume” are displayed according to the setting specified for the volume “Scale”. (v p. 179) Adjust the right channel output level. o Bass -12 dB – +12 dB (Default : 0 dB) Adjust bass.
Contents Connections Playback Settings o HDMI Audio Tips Appendix o Volume Limit Selects the audio signal format for playing an HDMI source in ZONE2. Make a setting for maximum volume. Through (Default): The HDMI audio signal is passed through this unit to the device in ZONE2. 60 (-20 dB) / 70 (-10 dB) / 80 (0 dB) (Default : 70 (-10 dB)) The HDMI audio signal input into this unit is converted to a PCM signal that can be output from the ZONE2 PRE OUT connectors or speaker terminals.
Contents Connections Playback Settings o Mute Level Tips Appendix Zone Rename Set the amount of attenuation when muting is on. Change the display title of each zone to one you prefer. Full (Default): The sound is muted entirely. MAIN ZONE / ZONE2 –40 dB : The sound is attenuated by 40 dB down. Set Defaults: –20 dB : The sound is attenuated by 20 dB down. The default setting is restored for the edited zone name. 0 Up to 10 characters can be input.
Contents Connections Playback Settings Smart Select Names Select the conditions for activating trigger out. For details about how to connect the DC OUT jack, see “DC OUT jack” (v p. 79). Smart Select 1 / Smart Select 2 / Smart Select 3 / Smart Select 4 n When setting for zone (MAIN ZONE/ZONE2) The default setting is restored for the edited smart select name. Trigger out is activated through linkage to the power of the zone set to “On”.
Contents Connections Playback Settings Tips Front Display Makes settings related to the display on this unit. o Dimmer Adjust the display brightness of this unit. Bright (Default): Normal display brightness. Dim: Reduced display brightness. Dark: Very low display brightness. Off: Turns the display off. 0 You can also adjust the display by pressing DIMMER on the main unit.
Contents Connections Playback Settings Firmware Display Checks for the latest firmware information about updates and upgrades, updates the firmware, and sets up the notification message display for updates and upgrades. o Update Updates the firmware of this unit. Update: Execute the update process. When the update starts, the menu screen is shut down. During the update, the progress is shown on the display. 0 This unit automatically retries updating if updating fails.
Contents Connections Playback Settings o Notifications Appendix o Add New Feature When the latest firmware is available, a notification message is displayed on the TV screen at power on. The notification message is displayed for about 40 seconds when the power is turned on. Display new features that can be downloaded to this unit and perform an upgrade. Update On (Default): Display update message. Off: Do not display update message. Upgrade Package: Display the items to be upgraded.
Contents Connections Playback Settings Show information about this unit settings, input signals, etc. requirements and settings for an Internet connection. (v p. 76) 0 Do not turn off the power until updating or upgrading is completed. o Audio 0 Approximately 1 hour is required for the updating/upgrading procedure Show the audio information for MAIN ZONE. to be completed. 0 Once updating/upgrade starts, normal operations on this unit cannot be performed until updating/upgrading is completed.
Contents Connections Playback Settings o Video Tips Appendix o Notifications Show the HDMI input/output signals and HDMI monitor information for MAIN ZONE. Displays and sets notifications. Also, sets whether or not to display the notification when the power is turned on. HDMI Signal Info. Notification Alerts Resolution / Color Space / Pixel Depth HDMI Monitor On (Default): Notification messages are displayed. Interface / Resolutions Off: Notification messages are not displayed.
Contents Connections Playback Settings Usage Data Tips Appendix Setup Lock To help us improve our products and customer service, Marantz collects anonymous information about how you use your AV receiver (such as frequently used input sources and sound modes and speaker settings). Marantz will never provide any information we collect to third parties. Yes: Provide information on the operating status of this unit. No: Do not provide information on the operating status of this unit.
Contents Connections Playback Settings Tips Appendix Limiting the operating zone with the remote control ZONE2 operations can be disabled using the remote control. ZONE SELECT ZONE2 CBL/SAT 1 POWER ZONE 2 MAIN SLEEP DVD Blu-ray MEDIA PLAYER GAME AUX1 TV AUDIO AUX2 TUNER iPod/USB CD Bluetooth ONLINE MUSIC PHONO INTERNET RADIO 1 INFO Press and hold ZONE2 and SETUP while configuring the setting. The MAIN and ZONE2 buttons blink and the setting is canceled.
Contents Connections Playback Settings o Contents Tips Appendix Troubleshooting Tips I want the volume not to become too loud by mistake 253 I want to keep the volume at the same level when I turn the power on 253 I want to have the subwoofer always output audio 253 I want to make human voices in the movies clearer 253 I want to keep bass and clarity during playback at a lower volume level 253 I want to automatically adjust the volume level difference in content such as TV and movies 253
Contents Connections Playback Settings Tips Appendix Tips I want the volume not to become too loud by mistake 0 Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake. You can set this for each zone. (“Volume” (v p. 179), “Volume Limit” (v p.
Contents Connections Playback Settings Tips Appendix I want to set the optimized listening environment after changing the configuration/position of the speakers or changing a speaker to a new one. 0 Perform Audyssey® Setup. This automatically makes the optimized speaker settings for the new listening environment. (v p. 204) I want to combine a desired video with the current music 0 Set “Video Select” in the option menu to “On”.
Contents Connections Playback Settings Tips Appendix Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the corresponding symptoms in this section. If the symptoms do not match any of those described here, consult your dealer as it could be due to a fault in this unit.
Contents Connections Playback Settings Tips Appendix o Power does not turn on / Power is turned off Symptom Cause / Solution Page Power does not turn on. 0 Check whether the power plug is correctly inserted into the power outlet. 80 Power automatically turns off. 0 The sleep timer is set. Turn on the power again. 153 0 “Auto Standby” is set. “Auto Standby” is triggered when there is no operation for a set amount of time. To 240 Power turns off and the power indicator flashes in red approx.
Contents Connections Playback Settings Tips Appendix o Operations cannot be performed through the remote control unit Symptom Operations cannot be performed through the remote control unit. Cause / Solution Page 0 Batteries are worn out. Replace with new batteries. 8 0 Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 8 30°. 0 Remove any obstacle between this unit and the remote control unit.
Contents Connections Playback Settings Tips Appendix o No sound comes out Symptom No sound comes out of speakers. Cause / Solution Page 0 Check the connections for all devices. 28 0 Insert connection cables all the way in. － 0 Check that input connectors and output connectors are not reversely connected. － 0 Check cables for damage. － 0 Check that speaker cables are properly connected. Check that cable core wires come in contact with the 35 0 Securely tighten the speaker terminals.
Contents Connections Playback Settings Tips Appendix o Desired sound does not come out Symptom The volume does not increase. Cause / Solution Page 0 The maximum volume is set too low. Set the maximum volume using “Limit” on the menu. 0 Appropriate volume correction processing is performed according to the input audio format and settings, so the volume may not reach the upper limit. No sound comes out with the HDMI connection. 0 Check the connection of the HDMI connectors.
Contents Connections Playback Symptom Settings Tips Appendix Cause / Solution Page DTS Neural:X mode cannot 0 DTS Neural:X cannot be selected when using the headphones. be selected. － Dolby Surround mode cannot be selected. 0 Dolby Surround cannot be selected when using the headphones. Sound modes other than “Stereo” or “Direct” cannot be selected. 0 Only “Stereo” or “Direct” can be selected for the sound mode if Headphone:X signals are input.
Contents Connections Playback Settings Tips Appendix o Sound is interrupted or noise occurs Symptom During playback from the Internet radio or USB memory device, sound is occasionally interrupted. Cause / Solution Page 0 When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted. － 0 The network communication speed is slow or the radio station is busy. － When making a call on iPhone, noise occurs in audio output on this unit.
Contents Connections Playback Settings Tips Appendix o No video is shown on the TV Symptom No picture appears. Cause / Solution Page 0 Check the connections for all devices. 63 0 Insert connection cables all the way in. － 0 Check that input connectors and output connectors are not reversely connected. － 0 Check cables for damage. － 0 Match the input settings to the input connector of the TV connected to this unit. 199 0 Check that the proper input source is selected.
Contents Connections Playback Symptom While the menu is being displayed, no video is shown on the TV. Settings Tips Cause / Solution Page 0 The video being played will not appear in the background of the menu when the menu is operated during － playback of the following video signals.
Contents Connections Playback Settings Tips Appendix o The menu screen is not displayed on the TV Symptom The menu screen or status information screen is not displayed on the TV. Cause / Solution Page 0 The menu screen is only displayed on this unit and a TV connected with an HDMI cable. If this unit is connected to a TV using a different video output connector, operate while watching the display on this unit.
Contents Connections Playback Settings Tips Appendix o iPod cannot be played back Symptom Cause / Solution Page iPod cannot be connected. 0 When using iPod by connecting it to the USB port, some iPod variations are not supported. 0 When iPod is connected by using a USB cable other than the genuine cable, iPod may not be － 0 This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN).
Contents Connections Playback Settings Tips Appendix o USB memory devices cannot be played back Symptom “No connection” is displayed. Cause / Solution Page 0 This unit cannot recognize the USB memory device. Disconnect and reconnect the USB memory device. 72 0 Mass storage class compatible USB memory devices are supported. － 0 This unit does not support a connection through a USB hub. Connect the USB memory device directly to － 0 The USB memory device must be formatted to FAT16 or FAT32.
Contents Connections Playback Settings Tips Appendix o File names on the iPod/USB memory device are not displayed properly Symptom The file names are not displayed properly (“...”, etc.). Cause / Solution Page 0 Characters that cannot be displayed have been used. On this unit, characters that cannot be displayed are replaced with a “. (period)”. － o Bluetooth cannot be played back Symptom Bluetooth devices cannot be connected to this unit. The sound is cut off.
Contents Connections Playback Settings Tips Appendix o The Internet radio cannot be played back Symptom Cause / Solution Page A list of broadcasting stations is not displayed. 0 The LAN cable is not properly connected, or the network is disconnected. Check the connection status. Internet Radio cannot be played. 0 The selected radio station is broadcasting in a format that is not supported by this unit. Formats that can 0 Perform the network diagnostic mode.
Contents Connections Playback Settings Tips Appendix o Music files on PC or NAS cannot be played back Symptom Files stored on a computer cannot be played. Cause / Solution Page 0 Files are stored in a non-compatible format. Record in a compatible format. 281 0 Files that are copyright protected cannot be played on this unit. － 0 The set’s USB port cannot be used for connection to a computer. － 0 Media sharing settings are not correct.
Contents Connections Playback Settings Tips Appendix o The HDMI control function does not work Symptom The HDMI control function does not work. Cause / Solution Page 0 Check that “HDMI Control” in the menu is set to “On”. 189 0 You cannot operate devices that are not compatible with the HDMI control function. In addition, 150 0 Check that the HDMI control function setting is enabled on all devices connected to this unit.
Contents Connections Playback Settings Tips Appendix o Cannot connect to a wireless LAN network Symptom Cannot connect to the network. Cause / Solution Page 0 The network name (SSID), password and encryption setting have not been set up correctly. Configure the 233 0 Shorten the distance from the wireless LAN access point and remove any obstructions to improve access － network settings according to the setting details of this unit. first before re-connecting again.
Contents Connections Playback Settings Tips Appendix o When using HDMI ZONE2, the devices does not function properly Symptom When using MAIN ZONE, video output is interrupted in HDMI ZONE2. Cause / Solution Page 0 With the same input source selected for MAIN ZONE and ZONE2, when you operate MAIN ZONE, video － may be interrupted in HDMI ZONE2. When using HDMI ZONE2, 0 Check that the power is on for ZONE2. no video or audio is output 0 Check the input source for ZONE2. from the TV in ZONE2.
Contents Connections Playback Settings Tips Appendix Resetting factory settings Perform this procedure if the display is abnormal or if operations cannot be performed. Various settings are reset to the factory default values. Make settings again. X 1 2 M-DAX 3 . Display Press X while simultaneously pressing M-DAX and ZONE2 SOURCE. Remove your fingers from the two buttons when “Initialized” appears on the display.
Contents Connections Playback Settings Tips Appendix About HDMI HDMI is an abbreviation of High-Definition Multimedia Interface, which is an AV digital interface that can be connected to a TV or amplifier. With the HDMI connection, high definition video and high quality audio formats adopted by Blu-ray Disc players (Dolby Digital Plus, Dolby TrueHD, DTS-HD, DTS-HD Master Audio) can be transmitted, which is not possible with the analog video transmission.
Contents Connections Playback Settings 0 Auto Lip Sync 0 ARC (Audio Return Channel) This function can automatically correct delay between the audio and video. Use a TV that is compatible with the Auto Lip Sync function. Even when the power to this unit is set to standby, signals input from the HDMI input connector are output to a TV or other device that is connected to the HDMI output connector.
Contents Connections Playback Settings o Supported audio formats 2-channel, 32 kHz – 192 kHz, 16/20/24 bit Multi-channel Linear PCM 7.1-channel, 32 kHz – 192 kHz, 16/20/24 bit Bitstream Dolby Digital / DTS / Dolby Atmos / Dolby TrueHD / Dolby Digital Plus / DTS:X / DTS-HD Master Audio / DTS-HD High Resolution Audio / DTS Express DSD 2-channel – 5.1-channel, 2.
Contents Connections Playback Settings Tips Appendix Video conversion function This unit automatically converts the input video signals as shown in the diagram before outputting them to the TV.
Contents Connections Playback Settings Tips Appendix . This unit can convert the input video signals to the resolution that is set for “Resolution” in the menu before outputting them to the TV. (v p.
Contents Connections Playback Settings Tips Appendix Playing back a USB memory devices 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4. 0 This unit is compatible with WMA META tags. 0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly.
Contents Connections Playback Settings The limits on the number of folders and files that can be displayed by this unit are as follows. Media Memory capacity USB memory device 8 levels Number of folders 500 filesz2 5000 Number of This unit supports the following Bluetooth profile. 0 A2DP (Advanced Audio Distribution Profile): When a Bluetooth device that supports this standard is connected, monaural and stereo sound data can be streamed at a high quality.
Contents Connections Playback Settings Tips Appendix Playing back a file saved on a PC or NAS 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4. 0 This unit is compatible with WMA META tags. 0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly.
Contents Connections Playback Settings Tips Appendix Playing back Internet Radio Personal memory plus function o Playable broadcast station specifications The most recently used settings (input mode, HDMI output mode, sound mode, tone control, channel level, MultEQ® XT32, Dynamic EQ, Dynamic Volume, M-DAX and audio delay, etc.) are saved for each input source. WMA Sampling frequency 32/44.1/48 kHz MP3 32/44.1/48 kHz Bit rate 48 – 192 kbps 32 – 320 kbps MPEG-4 AAC 32/44.
Contents Connections Playback Settings Tips Appendix Sound modes and channel output . S This indicates the audio output channels or surround parameters that can be set. D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”. (v p.
Contents z1 z2 z3 z4 z5 z6 Connections Playback Settings Tips The applicable sound mode includes “Dolby Surround” and sound modes that have “+Dolby Surround” in the sound mode name. The applicable sound mode includes “DTS Neural:X” and sound modes that have “+Neural:X” in the sound mode name. A signal for each channel contained in an input signal is output as audio. Audio is not output when “Speaker Config.” - “Surr. Back” in the menu is set to “1 spkr”. (v p.
Contents Connections Playback Settings Tips Appendix .
Connections Playback Settings Tips Appendix .
Contents z1 z2 z3 z4 z5 z6 z7 z8 Connections Playback Settings Tips This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos signal is played. This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS:X or DTS signal is played. This item can be selected when a DTS:X signal that is compatible with the Dialog Control function is input. This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
Contents Connections Playback Settings Tips Appendix Types of input signals, and corresponding sound modes . F This indicates the default sound mode. S This indicates the selectable sound mode. 2-channel signal Sound mode NOTE Analog / PCM Dolby Digital (+/HD) DTS (-HD) Multi-channel signal DSD (Super Audio CD) PCM Multi DTS Surround DTS:X MSTR / DTS:X DTS-HD MSTR DTS-HD HI RES DTS ES Dscrt6.1 DTS ES Mtrx6.
Connections Playback Settings Tips Appendix . Contents 2-channel signal Sound mode Multi Ch In Multi Ch In Multi Ch In + Dolby Surround Multi Ch In 7.1 Multi Ch In + Neural:X Direct Direct DSD Direct Pure Direct Pure Direct DSD Pure Direct Original sound mode Multi Ch Stereo Virtual Stereo Stereo z2, z8 NOTE Analog / PCM Dolby Digital (+/HD) DTS (-HD) Multi-channel signal DSD (Super Audio CD) PCM Multi DTS:X DTSHD DTS Express DTS ES Dscrt6.1 DTS ES Mtrx6.
Contents Connections Playback Settings Tips Appendix z1 This item can be selected when using any of the Surround Back, Front Height, Top Front, Top Middle, Top Rear, Rear Height, Front Dolby, Surround Dolby or Back Dolby speaker. z2 This item can be selected when surround back speakers are used. z3 This item can be selected when the input signal is DTS-HD Master Audio. z4 This item can be selected when the input signal is DTS-HD Hi Resolution.
Contents Connections Playback Settings Tips Appendix Explanation of terms o Audyssey Audyssey LFC™ (Low Frequency Containment) Audyssey LFC™ solves the problem of low frequency sounds disturbing people in neighboring rooms or apartments. Audyssey LFC™ dynamically monitors the audio content and removes the low frequencies that pass through walls, floors and ceilings. It then applies psychoacoustic processing to restore the perception of low bass for listeners in the room.
Contents Connections Playback Settings o Dolby Tips Appendix Dolby Digital Dolby Digital is a multi-channel digital signal format developed by Dolby Laboratories. A total of 5.1-channels are played: 3 front channels (“FL”, “FR” and “C”), 2 surround channels (“SL” and “SR”) and the “LFE” channel for low frequency effects. Because of this, there is no crosstalk between channels and a realistic sound field with a “three-dimensional” feeling (sense of distance, movement and positioning) is achieved.
Contents Connections Playback Settings Tips Appendix o DTS Dolby Speaker Technology (Dolby Atmos Enabled speakers) A convenient alternative to speakers built into the ceiling, Dolby Atmos Enabled speakers employ the ceiling above you as a reflective surface for reproducing audio in the height plane above the listener. These speakers feature a unique upward firing driver and special signal processing. These features can be built into a conventional speaker or standalone speaker module.
Contents Connections Playback Settings Tips Appendix DTS-ES™ Discrete 6.1 DTS-HD High Resolution Audio DTS-ES™ Discrete 6.1 is a 6.1-channel discrete digital audio format adding a surround back (SB) channel to the DTS digital surround sound. Decoding of conventional 5.1-channel audio signals is also possible according to the decoder.
Contents Connections Playback Settings o Audio This is a codec for lossless audio compression method developed by Apple Inc. This codec can be played back on iTunes, iPod or iPhone. Data compressed to approximately 60 – 70 % can be decompressed to exactly the same original data. FLAC (Free Lossless Audio Codec) FLAC stands for Free lossless Audio Codec, and is a lossless free audio file format. Lossless means that the audio is compressed without any loss in quality. The FLAC license is as shown below.
Contents Connections Playback Settings Tips Appendix MPEG (Moving Picture Experts Group), MPEG-2, MPEG-4 Speaker impedance These are the names for digital compression format standards used for the encoding of video and audio. Video standards include “MPEG-1 Video”, “MPEG-2 Video”, “MPEG-4 Visual”, “MPEG-4 AVC”. Audio standards include “MPEG-1 Audio”, “MPEG-2 Audio”, “MPEG-4 AAC”. This is an AC resistance value, indicated in Ω (ohms). Greater power can be obtained when this value is smaller.
Contents Connections Playback Settings Tips Appendix o Video o Network ISF AirPlay ISF (Imaging Science Foundation) is an organization that certifies video technicians who are then qualified to carry out calibration and adjustment to match the installation conditions. It also sets quality standards for the optimization of device video performance. AirPlay sends (plays) contents recorded in iTunes or on an iPhone/iPod touch/iPad to a compatible device via the network.
Contents Connections Playback Settings Tips Appendix WEP Key (network key) WPA-PSK/WPA2-PSK (Pre-shared Key) This is key information used for encrypting data when conducting data transfer. On this unit, the same WEP key is used for data encryption and decryption, so the same WEP key must be set on both devices in order for communications to be established between them.
Contents Connections Playback Settings Tips o Others HDCP When transmitting digital signals between devices, this copyright protection technology encrypts the signals to prevent content from being copied without authorization. MAIN ZONE The room where this unit is placed is called the MAIN ZONE. Pairing Pairing (registration) is an operation that is required in order to connect a Bluetooth device to this unit using Bluetooth.
Contents Connections Playback Settings Tips Appendix Trademark information . . Manufactured under license from Audyssey Laboratories™. U.S. and foreign patents pending. Audyssey MultEQ® XT32, Audyssey Dynamic EQ®, Audyssey Dynamic Volume® and Audyssey LFC™ are registered trademarks of Audyssey Laboratories. .
Connections Playback Settings Tips Appendix . Contents For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol, DTS:X, and the DTSX logo are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved. . . The Wi-Fi CERTIFIED logo is a registered trademark of the Wi-Fi Alliance.
Contents Connections Playback Settings Tips Specifications o Audio section 0 Power amplifier Rated output: Front: 110 W + 110 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) 150 W + 150 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 110 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) 150 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround: 110 W + 110 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) 150 W + 150 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.
Contents Connections Playback Settings Tips 0 Analog Input sensitivity: 200 mV Frequency response: 10 Hz – 100 kHz — +1, –3 dB (Direct mode) S/N: 100 dB (IHF–A weighted, Direct mode) Distortion: 0.005 % (20 Hz – 20 kHz) (Direct mode) Rated output: 1.2 V 0 Digital D/A output: Rated output — 2 V (at 0 dB playback) Total harmonic distortion — 0.
Contents Connections Playback Settings Tips o Video section 0 Standard video connectors Input/output level and impedance: 1 Vp-p, 75 Ω/ohms Frequency response: 5 Hz – 10 MHz — 0, –3 dB 0 Color component video connector Input/output level and impedance: Y signal — 1 Vp-p, 75 Ω/ohms PB / CB signal — 0.7 Vp-p, 75 Ω/ohms PR / CR signal — 0.
Contents Connections Playback Settings Tips o Wireless LAN section Network type (wireless LAN standard): Security: Conforming to IEEE 802.11a Conforming to IEEE 802.11b Conforming to IEEE 802.11g Conforming to IEEE 802.11n (Wi-Fi® compliant) z1 WEP 64 bit, WEP 128 bit WPA/WPA2-PSK (AES) WPA/WPA2-PSK (TKIP) Radio frequency: 2.4 GHz, 5 GHz No. of channels: 2.
Contents Connections Playback Settings Tips Appendix o Bluetooth section Communications system: Bluetooth Version 2.1 + EDR (Enhanced Data Rate) Transmission power: Maximum 2.5 mW (Class 2) Maximum communication range: Approx. 32.8 ft/10 m in line of sight z2 Frequency band: 2.4 GHz band Modulation scheme: FHSS (Frequency-Hopping Spread Spectrum) Supported profiles: A2DP (Advanced Audio Distribution Profile) 1.2 AVRCP (Audio Video Remote Control Profile) 1.
Contents Connections Playback Settings Tips Appendix 15 3/8 (388) 3/4 (18) 3/4 (18) 2 1/8 (53) 9 7/8 (248) 15 3/4 (398) 13 3/4 (349) 1 7/8 (47) 7/8 (22) 1 3/8 (32) o Dimensions (Unit : in. (mm)) 2 1/4 (55) 13 1/2 (340) 9 1/8 (229) 6 3/8 (161) 2 (50) . 2 (50) 5/8 (14.5) 5 7/8 (146) 17 3/8 (440) o Weight: 27 lbs 16 oz (12.
Contents Connections Index Playback Settings vB v Numerics 3D ................................................................ 274 4K ................................................................ 274 5.1-channel .............................................. 32, 41 7.1-channel .............................................. 32, 42 9.1-channel ........................................... 0 , 46 AirPlay .......................................................... 123 All Zone Stereo ...................
Contents Connections vI Playback Settings vN Tips Appendix vS Input Assign ................................................. 199 NAS ............................................................. 109 Satellite tuner ................................................. 67 Input settings ........................................ 168, 199 Network settings .......................................... 230 Set-top box ..................................................... 67 Input signal ..................
Contents Connections vT Playback Settings vU Text Search .................................................. 130 Tips .............................................................. 253 Troubleshooting ........................................... 255 TV ....................................................... 63, 64, 65 Tips vW USB memory device ................................ 72, 89 Web control .................................................. 158 Wi-Fi settings .....................................
Contents Connections Playback Settings Tips Appendix License This section describes software license used for this unit. To maintain the correct content, the original (English) is used.
Contents Connections Playback Settings Definitions. “Articles” means, collectively, all articles written by Author which describes how the Source Code and Executable Files for the Work may be used by a user. “Author” means the individual or entity that offers the Work under the terms of this License. “Derivative Work” means a work based upon the Work or upon the Work and other pre-existing works.
Contents Connections Playback Settings You may distribute the Executable Files and Source Code only under the terms of this License, and You must include a copy of, or the Uniform Resource Identifier for, this License with every copy of the Executable Files or Source Code You distribute and ensure that anyone receiving such Executable Files and Source Code agrees that the terms of this License apply to such Executable Files and/or Source Code.
Contents Connections Playback Settings http://www.xiph.org/vorbis/ Copyright (c) 2002-2004 Xiph.org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 0 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Contents Connections Playback Settings 0 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 0 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 0 Neither the name of the Xiph.
Contents Connections Playback Settings http://curl.haxx.se COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1996 – 2011, Daniel Stenberg, . All rights reserved. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
Contents Connections Playback Settings Tips o License information for the software used in the unit About GPL (GNU-General Public License), LGPL (GNU Lesser General Public License) License This product uses GPL/LGPL software and software made by other companies. After you purchase this product, you may procure, modify or distribute the source code of the GPL/LGPL software that is used in the product.
. 3520 10450 00AM Copyright © 2016 D&M Holdings Inc. All Rights Reserved.
ENGLISH FRANÇAIS ESPAÑOL AV Surround Receiver SR6011 Quick Start Guide Check our AVR setup tips online Guide de démarrage rapide / Guía de inicio rápido Read Me First.... Lisez-moi en premier.... / Lea esto primero.... Us.Marantz.com/SetupTips Ca.Marantz.com/SetupTips Please do not return this unit to the store. If you need help… Call for Assistance 1-855-ONE-Marantz (USA) 1-855-663-6272 1-800-668-0652 (Canada) Monday – Friday 10:00AM to 10:00PM E.S.T Saturday 12:00PM to 8:00PM E.S.
Welcome Before You Begin Required for Setup Thank you for choosing a Marantz AV receiver. This guide provides step-bystep instructions for setting up your AV receiver. TV Speaker cables HDMI cable Subwoofer cable Speakers Optional or LAN cable Wi-Fi router • When connecting this unit to a device that is compatible with the Deep Color, 4K and ARC functions, use a “High Speed HDMI cable with Ethernet” that displays the HDMI logo.
What’s In the Box Quick Start Guide FM indoor antenna Safety Instructions AM loop antenna Notes on radio Sound calibration microphone Warranty (for USA/for CANADA) Cable labels Sound calibration microphone stand Remote control unit Receiver R03/AAA batteries Power cord External antennas for Bluetooth/ wireless connectivity • The included sound calibration microphone stand is convenient for use when performing Speaker Calibration.
Important: External Antennas The removable external antennas are required for both Bluetooth and Wireless network connectivity. Please make sure to connect the antennas before attempting to use the Bluetooth or Wi-Fi features of the SR6011. n Connecting the external antennas for Bluetooth/Wireless connectivity For each of the two antennas: q Place the antenna evenly over the antenna terminal located at the upper left or right corner of the rear panel.
Setup There are three steps to the setup process.
2 Connecting the receiver 1) Place the receiver near your TV and connect the power cord TV Receiver Power cord (supplied) Connect to household power outlet (AC 120 V, 60 Hz) 5
2) Connect the receiver to your home network Wired LAN Wireless LAN Connect an Ethernet cable (not included) between your receiver and your network router. When connecting to wireless LAN (Wi-Fi), follow the instructions in “Connecting the external antennas for Bluetooth/Wireless connectivity” and connect the antennas.
3) Connect the receiver to your TV with an HDMI cable 4) Turn on the TV HDMI IN $5& HDMI cable TV remote control unit HDMI OUT MONITOR $5& 5) Select the appropriate HDMI input on your TV HDMI INPUT Receiver (Rear panel) or TV/ VIDEO ARC (Audio Return Channel) : If your TV supports ARC, your TV can send audio back to the AV receiver when you are using your TV’s built-in video sources (TV tuner, Smart TV streaming services, etc…) ARC requires that you enable HDMI CEC on your TV.
6) Turn on the receiver • Press X to turn on the receiver. 7) Verify the connection • Verify that you can see this screen on your TV. AV Reciever Setup Assistant Please select a language... English Français Español If this screen is not displayed, please go back and retry the steps again in the recommended sequence.
3 Following the On-Screen Setup Assistant The Setup Assistant will walk you through connecting and configuring your speakers and components to your Marantz receiver. Please use the remote control and follow the on-screen instructions. AV Reciever Setup Assistant Please select a language...
Owner’s Manual • For more information, visit www.marantz.com. • Refer to the Online Manual for other functions information and operation procedure details. manuals.marantz.com/SR6011/NA/EN/ All New “Marantz 2016 AVR Remote” App The “Marantz 2016 AVR Remote” App allows you to remotely control your Marantz receiver wirelessly from your iOS, Android, or Kindle mobile devices. Please visit the Apple App Store, Google Play, or the Amazon Appstore and search for “Marantz 2016 AVR Remote” to get your free copy.
www.marantz.com You can find your nearest authorized distributor or dealer on our website. tnaPantz· is a registered trademark. Printed in Vietnam 5411 11382 00AM Copyright © 2016 D&M Holdings Inc. All Rights Reserved.
3URGXFW LQIRUPDWLRQ 65 &+$11(/ 1(7:25. $9 5(&(,9(5 :,7+ %/8(7227+ $1' :, ), 4K 4K HD VIDEO PC AUDIO STREAMING ,PPHUVH \RXUVHOI LQ VWXQQLQJ ' VXUURXQG VRXQG ZLWK WKH 65 $9 UHFHLYHU IHDWXULQJ 'ROE\ $WPRV DQG '76 ; 7KH 65 LV HTXLSSHG ZLWK FKDQQHO DPSOLILFDWLRQ ZKLFK PHDQV \RX FDQ VHWXS D RU ' H[SHULHQFH ZLWKRXW WKH QHHG RI H[WHUQDO DPSOLILHU ,I \RX OLNH WR WDNH DGYDQWDJH RI WKH FK SURFHVVLQJ MXVW DGG DQ FK SRZHU DPSOLILHU DQG HQMR\ 'ROE\
'HVLJQ DQG VSHFLILFDWLRQV DUH VXEMHFW WR FKDQJH E\ 0DUDQW] ZLWKRXW QRWLFH 65 &+$11(/ 1(7:25. $9 5(&(,9(5 :,7+ %/8(7227+ $1' :, ), )($785(6 65 $8',2 $QDORJXH ,Q 2XW 08/7,&+$11(/ 6855281' '76 +' 0DVWHU '76 ; '76 1HXUDO ; • é é 'LJLWDO 2SWLFDO ,Q 'ROE\ 7UXH+' 'ROE\ $WPRV 'ROE\ 6XUURXQG • é é 'LJLWDO &RD[LDO ,Q 0XOWLFKDQQHO 6WHUHR é 0XOWLFKDQQHO 3UH 2XW • ZLWK SURFHVVLQJ &RPSUHVVHG DXGLR (QKDQFHU 0'$; é =RQH DXGLR SUHRXW é
Microphone Stand Assembly Instructions 1 4 Montageanleitung Mikrofonstander Instructions d'assemblage du support de microphone lstruzioni per il montaggio del supporto microfono lnstrucciones de montaje del soporte del micr6fono 2 Montage-instructies Microfoonstatief Monteringsanvisning for mikrofonstall li1HCTPYK4~~ '<'1'? ::z?Z / H:li
tnaPantz® ENGLISH Please Read Please keep this for future reference We at Marantz appreciate your business. Please accept our thanks for purchasing our product. Your satisfaction with our product is our main concern. Information about firmware update This unit has the ability to update its firmware over the internet. If an update is interrupted or fails, a message (See below) may appear on the receiver front panel. I 1Jpd.
~~....r 7.2 SURROUND SPEAKERS ~-----~ FRONT L SURROUND L FRONT L SURROUND L SUBWOOFER2 i SUBWOOFER2 R SURROUND BACK '' i' SURROUND BACK R ' :..... ------------- ................. ------- .. --..--...... --------------- ... ------------------------------------------------------------------------..-- .. --......... -.. -..--.. -..... -- .................. -----.. -. : : ': :' i ' ~- L ,.,._ L .
Fi CERTIFIED
Safety Instructions marantz (Read these safety instructions before operating the unit.) 0 SAFETY PRECAUTIONS CAUTIONS ON INSTALLATION CAUTION: To completely disconnect this product from the mains, disconnect the plug from the wa ll socket outlet. The mains pl ug is used to completely interrupt the power supply to the unit and must be within easy access by the user. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK}. NO USER·SERVICEABLE PARTS INSIDE.
CAUTION (FOR AMPLIFIER): HOT SURFACE. DO NOT TOUCH. The top surface over the internal heat sink may become hot when operating this product continuously. Do not touch hot areas, especially around the "Hot surface mark" and the top panel. Hot PRECAUTION (POUR AMPLIFICATEUR): surface mark SURFACE CHAUDE. NE PAS TOUCHER. La surface superieure du dissipateur de chaleur peut devenir chaude si vous utilisez ce produit en continu.
Notes on radio tnarantz #I FCC Information (For US customers) 1. COMPUANCE INFORMATION • Product Name: AV Surround Receiver • Model Number. NR1607 1 SR5011 / SR6011 • CONTAINS TRANSMITTER MODULE FCC ID: ZOO-CY920C IC Information {For Canadian customers) I This product complies with Part 15 of the FCC Rules.
- D 11-I~II.IT-l>~)i· :d:-?btii!l'~ttGt1v.::UJ'®l) © lif':IO)iiJ.I:~Jilll<'OtlTL ' *~ , :$:~1'1<1. 2.4GHz/ 5GHz 0)10i5&l&i*O)~;&~~IJIIJ!_., Hc~!lll:: 'f )!Ji.u. -ottJ'lliiJ;JJtltc 1)11(1 utc l) ~ vlTIMelitJ'® l) a;~ o (2.4GHz/ 5GHz 0)10i5&:l1l*~~IIJ!_., TL \?;;tt<>~!iil
For CANADA -a•antz® MARANTZ CANADA LIMITED WARRANTY Marantz Canada ("Marantz") warrants the following Marantz products for the periods indicated: Who May Enforce the Warranty 3-year warranty for both Parts & Labour, from the original purchase date : What We Will Pay For Amplifiers; Pre Amplifiers; Pre Amplifier-Processor-Tuners; Integrated Amplifiers; AV Pre Tuner; Tuners; Receivers; AV Surround Receiver; Blu-ray DVD Super Audio CD/CD Players/ Changers; CD Receiver; Turntable; Network Audio Player; D/
Pour CANADA tnateantz® GARANTIE LIMITEE DE MARANTZ CANADA Marantz Canada ("Marantz") garantie les produits suivants pour les periodes indiquees : 3 ans de garantle pour les pieces et Ia main d'muvre prenant effet apartir de Ia date d'achat du prodult : Amplificateurs, Preamplificateurs, Pre-ampli-processeurssyntoniseurs; amplificateurs integres, Pre-tuner AV, syntoniseurs, recepteurs, Recepteur Audio-Video, Blu-ray DVD Super Audio CD/ Lecteur CD/Changeur, Ampli-tuner CD, Platines TD, Lecteur reseau audio,
For U.S.A. 1naPa ntz® Limited Warranty Marantz America, Inc. ("Marantz") warrants the following Marantz Products for the periods indicated: 1. The following Marantz AudioNideo components, have a 3 year warranty for both Parts & Labor, from the original Who may enforce the warranty This warranty extends only to the original purchaser, not subsequent owners.
