Contents Connections Playback Settings Tips Appendix CD Receiver M-CR610 You can print more than one page of a PDF onto a single sheet of paper.
Contents Connections Playback Settings Tips Appendix Contents Connecting an FM/AM antenna················································· 23 Connecting to a home network (LAN)····································· 25 Accessories························································································· 5 Inserting the batteries······································································· 6 Operating range of the remote control unit······································ 6 Feat
Contents Connections Playback Settings Listening to Pandora®·································································· 42 Rear panel Remote Appendix Playing a USB memory device··················································· 59 Listening to Pandora®······································································ 43 Creating a new station···································································· 43 Listening to an existing station···········································
Contents Connections Playback Settings Settings Appendix Tips Menu map························································································· 77 Contents···························································································· 90 Menu operation··············································································· 79 Inputting characters······································································ 80 Using the number buttons·····················
Contents Connections Playback Settings Appendix Tips Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories Check that the following parts are supplied with the product.
Contents Connections Playback Settings Inserting the batteries Operating range of the remote control unit q Remove the rear lid in the direction of the arrow and remove it. Point the remote control unit at the remote sensor when operating it. w Load the two batteries properly as indicated by the q and w marks in the battery compartment. R03/AAA Approx. 23 ft/7 m 30° e Put the rear cover back on.
Contents Connections Playback Settings Tips Appendix Features Multiple music formats are supported, all in a compact form factor Easy operation • Easy wireless connection is possible by pressing the Wi-Fi CONNECT button (WPS and Wi-Fi Sharing) See the separate “Quick Setup Guide”. • Supports Internet Radio and music streaming Supports AirPlay® (vpage 62) You can enjoy a wide variety of content, including listening to Internet Radio, playing audio files stored on your PC.
Contents Connections Playback Settings Appendix Tips Part names and functions Front panel Q5 Q4 qw Front panel e Rear panel Remote Q1 Q0 Q2 Q3 r t 8 Index y u o i
Contents Connections Q5 Q4 Playback Q2 Q3 Settings Tips Appendix t Remote control sensor Q1 Q0 o This receives signals from the remote control unit (vpage 6). y Headphones jack (PHONES) Used to connect headphones. When the headphones are plugged into this jack, audio will no longer be output from the connected speakers. NOTE • To prevent hearing loss, do not raise the volume level excessively when using headphones.
Contents Connections Playback Settings Appendix Tips Rear panel Q1 q Front panel w Rear panel Remote e r 10 Index Q0 t o i y u
Contents Connections Playback Q1 Q0 o Settings Tips Appendix y NETWORK connector i Used to connect this unit to the network (vpage 25). u USB port (Rear) Used to connect iPod or USB memory devices (vpage 21). i Wi-Fi CONNECT button Used to connect to the wireless LAN. (See the separate “Quick Setup Guide”.) o DIGITAL IN connector Used to connect devices equipped with digital audio connector (vpage 20). q w er t Q0 AM antenna terminal (ANTENNA) yu Used to connect AM antennas (vpage 23).
Contents Connections Playback Settings Tips Appendix Remote control unit q Remote control signal transmitter q w e This transmits signals from the remote control unit (vpage 6). w CLOCK button The current time appear on the unit (vpage 82). e SLEEP button r This sets the sleep timer (vpage 76). r Input source select buttons These select the input source (vpage 29). t t System buttons y These perform playback related operations (vpage 31, 34, 36, 40, 42, 46, 48, 57, 60).
Contents Connections Playback Settings Tips Appendix u FAVORITES ADD / CALL buttons • To add radio stations or files to the favorite list, press ADD. • To call up a radio station or file registered in the favorite list, press CALL (vpage 53). Q5 Q6 i TOP MENU button To back to the top of the menu (vpage 79). o ENTER button This determines the selection (vpage 79). Q0 Cursor buttons (uio p) These select items (vpage 79). Q1 SEARCH button This displays the search menu (vpage 36, 52, 60).
Contents Connections Playback Settings Tips Appendix Q7 DBB/TONE button Adjusting the tone (vpage 75). Q8 VOLUME buttons (df) These adjust the volume level (vpage 30). Q9 Information button (INFO) This switches display items such as the elapsed time, album name and title name in the playback screen (vpage 31, 40, 52, 57). W0 SETUP button This displays the setup menu on the display (vpage 79). W1 CLEAR button This cancels the settings (vpage 32, 54, 80).
Contents Connections Playback Settings Tips Appendix Connections 22Cables used for connections Speaker connection (vpage 16) Provide necessary cables according to the devices you want to connect.
Contents Connections Playback Settings Tips Appendix Speaker connection Here we connect the speakers in the room to this unit. This section explains how to connect them using typical examples. Connecting the speaker cables Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to this unit, and be sure to connect the channels and polarities correctly.
Contents Connections Playback Settings Connection the subwoofer Tips Speaker A connection (Standard) Use a subwoofer cable to connect the subwoofer.
Contents Connections Playback Settings About the speaker B connections R (B) L (B) % • When using this connection, also set “Bi-Amp” in the menu to “Disable” (vpage 82).
Contents Connections Playback Settings Tips Appendix About the Bi-Amp connection Some audiophile loudspeakers can be connected to an amplifier with two separate amp-to-speaker connections per each speaker. One amplifier channel’s output is hooked up to the speaker’s bass driver (woofer), while the other amplifier drives the upper range transducers (tweeter, or in some cases midrange and tweeter).
Contents Connections Playback Settings Connecting an analog device Rear panel Appendix Connecting a digital device Analog device Digital device AUDIO OUT R L OPTICAL OUT AUDIO Front panel Tips R L R L Remote AUDIO 20 Index
Contents Connections Playback Settings Tips Appendix Connecting an iPod or USB memory device to the USB port To connect an iPod to this unit, use the USB adapter cable that was supplied with the iPod. For operating instructions see “Playing iPod” (vpage 55) or “Playing a USB memory device” (vpage 59). USB memory device Front iPod Rear or % • Marantz does not guarantee that all USB memory devices will operate or receive power.
Contents Connections Playback Settings 22Supported iPod / iPhone models • iPod classic • iPod nano • iPod touch • iPhone Front panel Rear panel Remote 22 Index Tips Appendix
Contents Connections Playback Settings Tips Appendix Connecting an FM/AM antenna NOTE After connecting the antenna and receiving a broadcast signal (vpage 51 “Listening to FM/AM broadcasts” ), fix the antenna with tape in a position where the noise level becomes minimal. • Do not connect two FM antennas simultaneously. • Even if an external AM antenna is used, do not disconnect the AM loop antenna. • Make sure the AM loop antenna lead terminals do not touch metal parts of the panel.
Contents Connections Playback Settings 22AM loop antenna assembly 22Using the AM loop antenna 1 Put the stand section through the bottom of the loop antenna from the rear and bend it forward. 2 Insert the projecting part into the square hole in the stand. Suspending on a wall Suspend directly assembling. Standing alone Use the procedure assemble. Square hole Projecting part Front panel Rear panel on Remote a wall without Nail, tack, etc.
Contents Connections Playback Settings Appendix Tips Connecting to a home network (LAN) You can connect this unit to your home network (LAN) to perform various types of playbacks and operations as follows.
Contents Connections Playback Settings Wireless LAN Appendix % • With this unit, it is possible to use the DHCP and Auto IP functions to make the network settings automatically. • When using this unit with the broadband router’s DHCP function enabled, this unit automatically performs the IP address setting and other settings. When using this unit connected to a network with no DHCP function, make the settings for the IP address, etc., at “Network” (vpage 86).
Contents Connections Playback Settings Connecting the power cord After completing all the connections, insert the power plug into the power outlet.
Contents Connections Playback Settings Tips Appendix Playback Turning the power on (vpage 29) Playing iPod (vpage 55) Selecting the input source (vpage 29) Playing a USB memory device (vpage 59) Adjusting the master volume (vpage 30) Listening to ANALOG IN (vpage 61) Turning off the sound temporarily (vpage 30) Listening to DIGITAL IN (vpage 61) Playing CDs (vpage 31) AirPlay function (vpage 62) Playing DATA CDs (vpage 33) Remote play function (vpage 65) Listening to Internet Radio (vpage
Contents Connections Playback Settings Tips Appendix Basic operation Turning the power on POWER X 1 Input source select buttons Press POWER X to turn on power to the unit. % • You can also switch the power to standby by pressing X on the main unit. Selecting the input source 1 VOLUME df MUTE Press the input source select button to be played back. The desired input source can be selected directly. % • Press the TUNER again to switch between FM/AM.
Contents Connections Playback Settings Adjusting the master volume 1 Use VOLUME df to adjust the volume. The volume level is displayed. % • You can also adjust the master volume by turning VOLUME df on the main unit. Turning off the sound temporarily 1 Press MUTE . The “MUTING” is displayed. % • To cancel, press MUTE Front panel again.
Contents Connections Playback Settings Tips Appendix Playing CDs Playing CDs 1/3 2 89 67 CD 1 2 Press CD to switch an input source. 3 Press 1/3. Insert a disc (vpage 108). • Press 5 on the main unit to open/close the disc tray. NOTE • Do not place any foreign objects in the disc tray. Doing so could damage it. • Do not push the disc tray in by hand when the power is turned off. Doing so could damage the set.
Contents Operation buttons 1/3 2 89 67 0 – 9, +10 RANDOM REPEAT INFO Connections Playback Settings Tips Appendix Playing tracks in the desired order (Program playback) Function Playback / Pause Stop Previous / Next (Press and hold) Fast-reverse / Fast-forward Select the track Random playback • Can be set during stop Repeat playback • Switching between Single-track repeat and All-track repeat. Switching the elapsed time display 1 In the stop mode, press PROGRAM.
Contents Connections Playback Settings Tips Appendix Playing DATA CDs 1/3 2 89 67 • This section explains how to playback MP3 and WMA files that are recorded onto a CD-R or CD-RW. • There are many music distribution sites on the Internet allowing you to download music files in MP3 or WMA (Windows Media® Audio) format. The music (files) downloaded from such sites can be stored on CD-R or CD-RW discs and played on this unit.
Contents Connections Playback Settings Playing files Operation buttons 1/3 2 1 2 Press CD to switch an input source . 3 Use ui to select the file to be played, then press ENTER. 89 Load a CD-R or CD-RW disc containing music files in the MP3 or WMA format into the disc tray (vpage 108). 67 ui op 0 – 9, +10 Playback starts.
Contents Connections Playback Settings Tips Appendix Listening to Internet Radio • Internet Radio refers to radio broadcasts distributed over the Internet. Internet Radio stations from around the world can be received. • The broad cast station types and specifications supported by this unit for playback are as follows.
Contents Connections Playback Settings Listening to Internet Radio Prepare for playback. 2 3 Press INTERNET RADIO. 4 • Check the network environment, then turn on this unit’s power (vpage 25 “Connecting to a home network (LAN)”). zzzzz (Country name) : • Displays typical Internet Radio stations your country. Search Stations : • Displays all Internet Radio stations that this unit can tune in to. Search Podcasts : • Displays Internet Radio stations in the podcasts that this unit can tune in to.
Contents Connections Playback Settings Playing the last played Internet Radio station 1 Press INTERNET RADIO. The source switches to “Internet Radio” and the last played radio station plays. There are many Internet Radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be difficult, because there are too many stations.
Contents Connections Playback Settings Tips Appendix Playing back files stored on a PC and NAS • This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA. • The network audio playback function of this unit connects to the server using technologies shown below. • Windows Media Player Network Sharing Service • Windows Media DRM10 • This unit can play back the following files.
Contents Connections Playback Settings Tips Appendix Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. If you are using a Media Server, be sure to apply this setting first. 22When using Windows Media Player 12 (Windows 7 / Windows 8) 1 2 3 4 Start up Windows Media Player 12 on the PC. 5 Click “OK” to finish. 22When using Windows Media Player 11 Select “More streaming options...” in the “Stream”.
Contents Connections Playback Settings Playing back files stored on a PC and NAS Operation buttons 1/3 2 Use this procedure to play music files or playlists. 89 1 Prepare for playback. 67 2 3 Press MUSIC SERVER. Use ui to select the server including the file to be played, then press ENTER. RANDOM 4 Use ui to select the file, then press ENTER. REPEAT q Check the network environment, then turn on this unit’s power (vpage 25 “Connecting to a home network (LAN)”).
Contents Connections Playback Settings % • WMA Lossless files can be played when using a server supporting transcoding, such as Windows Media Player Ver. 11 or later. NOTE • When playing back music files with your PC or NAS connected through wireless LAN, audio may be interrupted depending on your wireless LAN environment. In this case, play back music files with your PC or NAS connected through wired LAN. • The order in which the tracks/files are displayed depends on the server specifications.
Contents Connections Playback Settings Tips Appendix Listening to Pandora® Pandora is free, personalized internet radio that plays music and comedy you'll love. Just start with the name of one of your favorite artists, songs, comedians, or composers and Pandora will create a custom station that plays similar tracks. To listen to Pandora, use your Pandora log-in information, or register for a free account at www.pandora.com or from the Pandora smartphone application.
Contents Connections Playback Settings Listening to Pandora® 1 You can create up to 100 personalized radio stations. 1 2 3 Check the network environment, then turn on this unit’s power (vpage 25 “Connecting to a home network (LAN)”). • If you already have a Pandora account, you do not need to obtain a new account. Use your existing Pandora account. 2 Press ONLINE MUSIC to switch the input source to “Pandora”.
Contents Operation buttons 1/3 2 9 uio p SETUP TOP MENU INFO Connections Playback Settings 1 Remote Use ui and select the radio station (“Music2 Radio”) that you want to listen to, and press ENTER. Play random songs from your stations (Quick Mix) 1 • Your new station will play music with similar qualities to the artist or track you entered. • You can Skip up to 6 Tracks that are being played back within 1 hour.
Contents Connections Playback Settings Giving Feedback and Managing Stations Tips Appendix Sign Out You can personalize your stations by providing feedback. Disassociate this unit from your Pandora account. 1 Press p while a track is playing. 1 While the Pandora top menu is displayed, use ui to select “Sign Out”, then press ENTER. I like this track : • Press when you like the track that is being played. (Thumbs up) icon is • It will return to the Play Screen. And displayed.
Contents Connections Playback Settings Tips Appendix Listening to SiriusXM Internet Radio Enjoy anywhere access to the unparalleled content of SiriusXM. Whether on your computer, smartphone, tablet, Lynx Portable Enjoy anywhere access to the unparalleled content of SiriusXM. Whether on your computer, smartphone, tablet, Lynx Portable Radio, or compatible Internet-connected device, you don’t need to be in your vehicle to enjoy SiriusXM. For details, see the SiriusXM homepage. http://www.siriusxm.
Contents Connections Playback Settings Listening to SiriusXM Internet Radio Operation buttons 1/3 2 SETUP Over 120-channels of the SiriusXM programming you love, including commercial-free music plus sports, talk, news and entertainment. Listen anywhere on your computer or smartphone. 1 INFO Prepare for playback. q Check the network environment, then turn on this unit’s power (vpage 25 “Connecting to a home network (LAN)”). w Access the following website from your PC and obtain a SiriusXM account.
Contents Connections Playback Settings Tips Appendix Listening to Spotify Introduce your Marantz CD Receiver to a whole new world of music. With Spotify, you can enjoy instant access to millions of songs. A Spotify Premium subscription is required. For details, see the Spotify homepage. http://www.spotify.com ONLINE MUSIC 1/3 2 89 67 Listening to Spotify INFO uio p ENTER 1 Prepare for playback. 2 Press ONLINE MUSIC to switch the input source to “Spotify”.
Contents 4 Connections Playback Settings Input “Username” and “Password”. • For character input, see page 80. The types of characters that can be input are as shown below. 5 6 Use ui to select menu and then press ENTER. 8 Use ui to select a station, and press ENTER. Search : • Searches for tracks, artists and albums by entering keywords. What’s New : • Displays the list of the latest albums. Starred : • Displays the list of the starred tracks. Playlists : • Displays the playlists for Spotify.
Contents 9 Connections Playback Settings Operation buttons 1/3 2 When you press p during playback, the following menu appears. Star this track : • Adds a star to the selected track. Unstar this track : • Unregister a star to the selected track. Browse “Artist name” : • Displays the list of albums by the artist of the track that is being played back. Browse “Album name” : • Displays the list of tracks on the album that is being played back.
Contents Connections Playback Settings Appendix Tips Listening to FM/AM broadcasts For antenna connections, see “Connecting an FM/AM antenna” (vpage 23). Listening to FM/AM broadcasts TUNER 1 Press TUNER to select the reception band. 2 Press TUNE + or TUNE – to select the station you want to hear. TUNE +, – FM : When listening to an FM broadcast. AM : When listening to an AM broadcast. When a station is received, the MODE Front panel Rear panel Remote 51 Index will light.
Contents Connections Playback Settings Changing the FM tuning mode (Tune Mode) Appendix Automatically presetting FM stations (Auto Preset) You can change the mode for tuning into FM broadcasts. If you cannot tune in automatically with “Auto” mode, then change the mode to “Manual” and tune in manually. 1 Tips This unit can be preset to favorite list with a total of 50. For details on how to use Favorite, see “Favorite function” (vpage 53). Press MODE during FM reception.
Contents Connections Playback Settings Tips Appendix Favorite function This section provides information on the Favorite function. • The Favorite function allows you to register your favorite broadcast stations and files in the Favorite List in advance so that you can call and listen to the stations or files right away, whenever you want. • The contents that you can register and call are Internet radio station, music server and tuner. • Up to 50 items can be stored in the Favorite List.
Contents Connections Playback Settings Registering stations or files to the favorites list 1 Press FAVORITES ADD while the Internet radio station or file to register is played back. 2 Use ui to select a number to register the station or file, and press ENTER. Calling stations or files from the favorites list 1 2 Press FAVORITES CALL. 3 When the prompt “Delete?” appears, press ENTER. Use ui to select the station or file that you want to delete, and press CLEAR.
Contents Connections Playback Settings Tips Appendix Playing iPod FRONT USB REAR USB 1/3 2 89 67 INFO uio p ENTER RANDOM REPEAT Front panel • You can use the USB cable provided with the iPod to connect the iPod with the unit's Front and Rear USB port and enjoy music stored on the iPod. • For information on the iPod models that can be played back with this unit, see “Supported iPod / iPhone models” (vpage 22).
Contents Connections Playback Settings Listening to music on an iPod Connect the iPod to the USB port (vpage 21). 2 Press FRONT USB or REAR USB to switch the input source to “Front USB” or “Rear USB”. • The iPod display modes include “Direct iPod” and “Remote iPod”. By default, “Direct iPod”, where you directly operate the iPod itself while looking at the iPod screen, is set. • To change to “Remote iPod”, where you perform operations while having the iPod information displayed on the body.
Contents Connections Playback Settings Setting operation mode (Remote iPod Mode) Operation buttons 1/3 2 In this mode, various lists and screens during playback on the iPod are displayed on the body. This section describes the steps up to playing back tracks on the iPod in “Remote iPod”. 1 2 89 67 RANDOM Press MODE and display “Remote iPod”. REPEAT Use ui to select the file to be played, then press ENTER. MODE Playback starts.
Contents Connections Playback Settings Charging the iPod/iPhone You can charge your iPod/iPhone by connecting it to USB port. 22Standby charging If the unit enters power standby mode while the iPod/iPhone is charging, the unit will switch to standby charging mode, and the iPod/ iPhone will continue to be charged. When in standby charging mode, the power display light turns red.
Contents Connections Playback Settings Tips Appendix Playing a USB memory device • Playing back music stored on a USB memory device. • Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit. • This unit is compatible with USB memory devices in “FAT16” or “FAT32” format. • This unit can play back the following files.
Contents Connections Playback Settings Playing files stored on USB memory devices 1 Operation buttons 1/3 2 89 Connect the USB memory device to the USB port (vpage 21). 67 When you connect USB memory device to the Front USB port, the input source automatically switches to “Front USB”. 2 Press FRONT USB or REAR USB to switch the input source to “Front USB” or “Rear USB”. 3 Use ui to select the file to be played, then press ENTER. RANDOM REPEAT SEARCH Playback starts.
Contents Connections Playback Settings Tips Appendix Listening to ANALOG IN ANALOG IN DIGITAL IN 1 Prepare for playback. 2 Press ANALOG IN to select “Analog In 1” or “Analog In 2”. 3 Play the component connected to this unit. Check the connection, then turn on this units. Listening to DIGITAL IN 1 Prepare for playback. 2 3 Press DIGITAL IN to select “Digital In”. Check the connection, then turn on this units. Play the component connected to this unit.
Contents Connections Playback Settings Appendix Tips AirPlay function Enjoy music from your iTunes library with high quality sound anywhere in your home. Streaming music stored in iPhone, iPod touch, or iPad directly to the unit PC If you update your “iPhone/iPod touch/iPad” to iOS 4.2.1 or later, you can stream music stored in your “iPhone/iPod touch/iPad” directly to this unit. This unit Router 1 Make the Wi-Fi settings for iPhone, iPod touch, or iPad.
Contents Connections Playback Settings Playing iTunes music with this unit 1 Install iTunes 10, or later, on a Mac or Windows PC that is connected to the same network as this unit. 2 Turn this unit ON. Selecting multiple speakers (devices) It is possible to play iTunes songs on your home’s AirPlay compatible speakers (devices) other than those of this unit. 1 2 Set “Network Control” (vpage 86) to “On” for this unit. NOTE Click the AirPlay icon ' and select “Multiple”.
Contents Connections Playback Settings Perform iTunes playback operations with the remote control unit of this unit Devices Preferences General With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. 1 2 3 Playback Sharing Store Parental Devices Advanced Device backups: Select “Edit” – “Preferences...” on the menu. Select “Devices” in the iTunes setting window. Delete Backup ...
Contents Connections Playback Settings Appendix Tips Remote play function 22Roles each device plays You can use your home network to play back with this unit music files stored on PC, NAS, mobile phones and portable audio players. In this case, you use PC, mobile phones and portable audio players for operations. The following devices are used for Remote Play. As specified in the DLNA standard, these devices are called DMC, DMS or DMR according to their role.
Contents Connections Playback Settings Operations are different for each device, but the procedures for preparing for Remote Play are the same. The preparation procedures are shown below. You must make settings on DMC and DMS for Remote Play. Make the following settings. Also see the owner’s manual of each device for settings. 22Settings on PC and NAS Make settings on PC and NAS to exchange data with DMR devices. For settings, see “Applying media sharing settings” (vpage 39).
Contents Connections Playback Settings Tips Appendix Web control function You can control this unit from a web control screen on a web browser. Controlling the unit from a web control PC Router This unit 1 Switch the “Network Control” (vpage 86) setting to “On”. 2 Check the IP address of this unit with “Network Information” (vpage 86).
Contents 4 Connections Playback Settings 5 Enter the IP address of this unit in browser’s address box. For example, if the IP address of this unit is “192.168.0.2”, enter “http://192.168.0.2”. http://192.168.0.2 w Bonjour NETWORK apple Yahoo! Japan FIRMWARE e r Please select the menu. YouTube Wikipedia news(45) Please select the menu. FIRMWARE e Click when you setup network settings. (vGExample 1H) r Click when you update firmware (vpage 84) q Entering the IP address.
Contents 6 Operate. NETWORK FIRMWARE Connections Playback Settings GExample 1H Network Setting 1 NETWORK Friendly Name Marantz M-CR610 GExample 2H Network Setting 2 NETWORK t Set FIRMWARE y Set Default Network Connection Select Connection Select Connection [+]DHCP or Proxy Marantz M-CR610 u o Test Connection nn Friendly Name setting t To change the Friendly Name, enter the new name in the text box and click “Set”. y To reset the Friendly Name, click “Set Default”.
Contents Connections Playback Settings Tips 22Update on web screen nn Network connection settings Q0 Various items will be displayed if you selected “Wi-Fi” in Example 1. Select or input items as necessary, and then click “Test Connection” to apply the changes. • Items displayed may vary depending on selected items and connection status. • After selecting each item, wait a moment for the display to be updated. Firmware can be updated using the “Web control function” (vpage 67).
Contents 2 Connections Playback Settings 4 When the following screen is displayed by the PC, click the “Choose File” (q) button, select the update file, and click the “Upload” (w) button. Tips Appendix When the following screen is displayed, updating is complete. Firmware Firmware New Firmware: xxx.fw Upload new firmware Choose File Firmware upload status: 100% completed. The upload process finished successfully. Please close this.
Contents Connections Playback Settings Tips Appendix Other functions SLEEP CLOCK Listening to music in two locations using a multi-drive connection (vpage 73) DIMMER Adjusting the tone (vpage 75) Sleep timer function (vpage 76) Checking the current time (vpage 76) DBB/ TONE Switching the display’s brightness (vpage 76) uio p ENTER SETUP SPEAKER A/B Front panel Rear panel Remote 72 Index
Contents Connections Playback Settings Tips Listening to music in two locations using a multi-drive connection You can listen to music in different rooms using this unit with two pairs of speaker systems. 22Connecting the speaker cables M-CR610 Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to the unit, and be sure to connect the channels and polarities correctly.
Contents Connections Playback Settings 22Selecting speakers to output audio You can set up this unit to output audio from Speakers A, Speakers B, or both. 1 Press SPEAKER A/B. 2 Press SPEAKER A/B again to change the settings. The current setting is displayed. Speakers A are On : Outputs audio from Speakers A only. Speakers B are On : Outputs audio from Speakers B only. Both Speakers A and B are On : Outputs audio from both Speakers A and Speakers B.
Contents Connections Playback Settings Adjusting the tone 1 Press DBB/TONE to select the tone parameter to be adjusted. 2 Use ui to adjust the “Dynamic Bass Boost”, “Bass”, “Treble”, “Balance” or “Source Direct”. nn Balance Use o p to adjust the left/right volume balance. nn Source Direct The tone is not adjusted. On / Off (Default) nn Dynamic Bass Boost Emphasizes the bass sound with 10dB boost.
Contents Connections Playback Settings Sleep timer function Appendix Checking the current time You can have the power automatically switched to standby once a set time has elapsed. This is convenient for listening while going to sleep. 1 Tips 22Checking the current time when the power is on Press SLEEP and display the time you want to set. Press CLOCK. • Press once more and the display returns to its original condition. • The OFF indicator on the display lights.
Contents Connections Playback Settings Tips Appendix Settings Menu map For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. 22Quick Setup Setting items Quick Setup Description Performs the network settings using a Wizard style window. For details on the operations, see the separate “Quick Setup Guide”.
Contents Connections Playback Settings Tips Appendix 22Network Setting items Description Page Network Information Displays various information about the network. 86 Network Control Performs the ON/OFF settings for the network function when in standby mode. 86 Friendly Name Edits a name displayed on the Internet. 86 Settings Performs the settings for a wired or wireless LAN. 87 Performs the settings for a wired LAN.
Contents Connections Playback Settings Tips Appendix Menu operation TOP MENU uio p ENTER Front panel 1 Press SETUP. 2 Use uio p to select the menu to be set or operated, then press ENTER. 3 4 Use ui to change to desired setting. The menu is displayed. Press ENTER to enter the setting. • To return to the previous item, press o. • Exiting the Menu, press SETUP while the menu is displayed. The menu display disappears. • To back to the top of the menu, during menu operation, press TOP MENU.
Contents Connections Playback Settings Tips Appendix Inputting characters On this unit, you can change the name displayed on the following menu to the names that you prefer. • Character Search (vpage 36, 40, 60) • Friendly Name (vpage 86) • Character input for the network functions (vpage 36, 43, 47, 48) Using the number buttons 1 2 Using the cursor buttons Display the menu for inputting characters. Use o p to move the cursor to the character you want to change.
Contents Connections Playback Settings Tips Appendix General Make various other settings. 22Edit Alarm Alarm Edit the once alarm and everyday alarm. Set the once alarm and everyday alarm. 22Once Time display : Set the once alarm to on. Off : Set the once alarm to off. 22Everyday Time display : Set the everyday alarm to on. Off : Set the everyday alarm to off. 1 2 Use ui to select the alarm mode, then press ENTER. 3 4 Use ui to select the input source, then press ENTER.
Contents Connections Playback Settings Clock Appendix Speaker Configuration You can set up the Bi-Amp function, speakers to use, and the properties of speakers. 22Set the current time You can automatically adjust the clock of this unit using the Internet. 22Bi-Amp % You can use the Speakers A/B terminals to output audio from speakers compatible with Bi-Amp drive. • To use this function, the unit must be connected to the Internet. 1 2 Tips Use ui to select your time zone, then press ENTER.
Contents Connections Playback Settings 22Volume Offset Appendix Auto-Standby With the output of Speaker A fixed, the audio level of Speaker B can be adjusted within the range –6 dB to +6 dB. When this unit is in the stop state and there is no input signal and operation for 15 minutes, it automatically enters the standby mode.
Contents Connections Playback Settings Tips Appendix 22Notifications Firmware Set whether or not to check for firmware update, update the firmware, and display update, upgrade and alert notifications. Notification messages are displayed in the screen when the power is switched on when new firmware can be used, or when there are other notification messages. 22Update Update Update the firmware of Marantz CD Receiver. On (Default) : Display update message. Off : Do not display update message.
Contents Connections Playback Settings 22Add New Feature Tips Appendix Notes concerning use of “Update” and “Add New Feature” Display new features that can be downloaded to this unit and perform an upgrade. Upgrade Package : Display the items to be upgraded. Upgrade Status : Display a list of the additional functions provided by the upgrade. Upgrade Start : E xecute the upgrade process. When the upgrade starts, the display is shut down.
Contents Connections Playback Settings Tips Appendix Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network via DHCP, set “DHCP” to “On” (use the default setting). This allows this unit to use your home network.
Contents Connections Playback Settings Appendix nn Subnet Mask Settings When connecting an xDSL modem or connector adapter directly to this unit, input the subnet mask indicated in the documentation supplied by your provider. Normally input 255.255.255.0. You can make detailed settings for the network. To change the network environment, perform “Quick Setup”. (For details on the operations, see the separate “Quick Setup Guide”.
Contents Connections Playback Settings 22When making Wi-Fi connection 1 Auto Scan / WPS(PIN) / Web Browser Setup / Manual % 2 Set this PIN code to the register. nn Web Browser Setup nn Auto-Scan Use a web browser to set up Wi-Fi. A Wi-Fi device that can perform web browse operations is required. This automatically searches for networks. From the list of the networks, select the one you want to connect to. 1 2 3 When the network you want to connect to is not detected, select “Rescan”.
Contents Connections Playback Settings nn Manual Sets the wireless connection manually. SSID : Input the name of the wireless network (SSID). Security : Select the encryption method according to the encryption setting of the access point you are using. Password : Input the password. Default Key : Select the default key. • When connecting to a “WEP” encrypted network, “Default Key” menu is displayed. DHCP / Proxy : M ake settings for DHCP / Proxy (vpage 87). Test Connection : T est the connection.
Contents Connections Playback Settings Tips Appendix Tips Contents 22Tips.....................................................................(91) 22Troubleshooting...............................................(92) Simple operations in the power off state..........................................(91) Power does not turn on / Power is turned off...................................(92) Simple operations for iPod/USB........................................................(91) Indicator is flashing..
Contents Connections Playback Settings Tips Appendix Tips Simple operations in the power off state • When a input source select buttons, 1/3, FAVORITES CALL or 5 button is pressed, the operation is performed at the same time as the unit switches on (vpage 29, 31, 53). • When the Network Control function is set to “On”, you can perform playback, or other operations through AirPlay, App or the web control function (vpage 62, 67, 86).
Contents Connections Playback Settings Tips Appendix Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
Contents Connections Playback Settings Tips Appendix 22Operations cannot be performed through the remote control unit Symptom Operations cannot be performed through the remote control unit. Cause/Solution Page • Batteries are worn out. Replace with new batteries. • Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°. • Remove any obstacle between this unit and the remote control unit.
Contents Connections Playback Settings Tips Appendix 22No sound comes out Symptom Cause/Solution No sound comes out of speakers. • Check the connections for all devices. • Insert connection cables all the way in. • Check that input connectors and output connectors are not reversely connected. • Check cables for damage. • Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. Also, securely tighten speaker terminals.
Contents Connections Playback Settings Tips Appendix 22Desired sound does not come out Symptom Cause/Solution Left/right volume balance is unbalanced • Press the DBB/TONE button on the remote control to adjust the balance. Cannot switch between Speakers A/B • The Bi-Amp settings are enabled. Disable the Bi-Amp settings. Page 75 19, 82 No sound from the sub woofer. • Check the sub woofer connections. • Switch the sub woofer power on.
Contents Connections Playback Settings Tips Appendix 22Sound is interrupted or noise occurs Cause/Solution Page During playback from the Internet radio or USB memory device, sound is occasionally interrupted. Symptom • When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted. • The network communication speed is slow or the radio station is busy. – When making a call on iPhone, noise occurs in audio output on this unit.
Contents Connections Playback Settings Tips Appendix 22Cannot playback CDs Symptom Cause/Solution Cannot playback when the play button • The disc is dirty or scratched. Either clean the disc, or insert a different disc. is pressed, or cannot correctly play back a specific part of the disc. Page 108 108, 110 – Cannot playback CD-R/CD-RW. • CDs cannot be played back unless they have been finalized. Use a finalized disc.
Contents Connections Playback Settings Tips Appendix 22iPod cannot be played back Symptom Cause/Solution Page • When using iPod by connecting it to the USB port, some iPod variations are not supported. • When iPod is connected by using a USB cable other than the genuine cable, iPod may not be recognized. Use a genuine USB cable. 22 – • This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN).
Contents Connections Playback Settings Tips Appendix 22USB memory devices cannot be played back Symptom Cause/Solution Page • The set cannot recognize a USB memory device. Disconnect and reconnect the USB memory device. • USB memory devices of a mass storage class or those compatible with MTP are supported. • This unit does not support a connection through a USB hub. Connect the USB memory device directly to the USB port. • The USB memory device must be formatted to FAT16 or FAT32.
Contents Connections Playback Settings Tips Appendix 22File names on the iPod/USB memory device are not displayed properly Symptom The file names are not displayed properly (“...”, etc.). Cause/Solution Page • Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters that cannot be displayed are replaced with a “.” (period). – 22The Internet radio cannot be played back Symptom Cause/Solution Page The broadcasting station list is not displayed.
Contents Connections Playback Settings Tips Appendix 22Music files on PC or NAS cannot be played back Symptom Cause/Solution Page Files stored on a computer cannot be played. • Files are stored in a non-compatible format. Record in a compatible format. • You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be played on this unit. • Set and computer are connected by USB cable. The set’s USB port cannot be used for connection to a computer.
Contents Connections Playback Settings Tips Appendix 22Cannot connect by Wi-Fi Symptom Cannot connect to the network. Cannot connect to WPS. Cannot connect to the network using iPhone/iPod touch/iPad Front panel Rear panel Cause/Solution Page • The network name and password (WEP, etc.) settings are wrong. Configure the network settings according to the setting details of this unit.
Contents Connections Playback Settings Resetting factory settings Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values and all previously stored custom settings will be have to be manually restored. Tips Appendix 1 2 Pull the power cord out of the power outlet. 3 When the power indicator lights green, release the buttons.
Contents Connections Playback Settings Appendix Tips Appendix Playing back DATA CDs 22Compatible formats 22MP3 and WMA formats CD-R and CD-RW discs created in the format described below can be played. Writing software format File format Sampling frequency Bit rate MP3 32/44.1/48 kHz 32 – 320 kbps .mp3 WMA 32/44.1/48 kHz 64 – 192 kbps .wma % ISO9660 level 1 When written in other formats, it may not be possible to play the disc properly. • Be sure to give files the extension “.
Contents Connections Playback Settings Playing back USB memory devices 22Compatible formats • This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. • This unit can show the artwork that was embedded by using MP3 ID3Tag Ver. 2.3 or 2.4. • This unit is compatible with WMA META tags. • If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/ MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly.
Contents Connections Playback Settings The limits on the number of folders and files that can be displayed by this unit are as follows. Item Memory capacity z1 USB memory devices WMA (Windows Media Audio) MP3 (MPEG-1 Audio Layer-3) 8 levels Number of folders 500 Number of files z2 5000 z1 z2 22Playable broadcast station specifications FAT16 : 2 GB, FAT32 : 2 TB Number of folder directory levels The limited number includes the root folder.
Contents Connections Playback Settings Appendix Tips Playing back files stored on PC or NAS 22Playback file specifications • This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. • This unit can show the artwork that was embedded by using MP3 ID3Tag Ver. 2.3 or 2.4. • This unit is compatible with WMA META tags. • If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/ MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly.
Contents Connections Playback Settings About Discs Appendix Tips 22Loading discs • Place the disc in the tray, label side up. • Make sure the disc tray is fully open when inserting the disc. • Place the discs flat, 12 cm discs in the outer tray guide (Figure 1), 8 cm discs in the inner tray guide (Figure 2). 22Discs playable on this unit q Music CDs Discs marked with the logo below can be played in this unit.
Contents Connections Playback Settings 22Cautions on loading discs Appendix Tips 22Cleaning discs • Only load one disc at a time. Loading two or more discs can damage the unit or scratch the discs. • Do not use cracked or warped discs or discs that have been repaired with adhesive, etc. • Do not use discs on which the sticky part of cellophane tape or labels is exposed or on which there are traces of where labels have been removed. Such discs can get caught inside the player and damage it.
Contents Connections Playback Settings Explanation of terms F Finalize This is processing that enables playing back of disc of CD, which was recorded using a recorder, by other players. FLAC FLAC stands for Free lossless Audio Codec, and is a lossless free audio file format. Lossless means that the audio is compressed without any loss in quality. The FLAC license is as shown below.
Contents Connections Playback Settings M MP3 (MPEG Audio Layer-3) This is an internationally standardized audio data compression scheme, using the “MPEG-1” video compression standard. It compresses the data volume to about one eleventh its original size while maintaining sound quality equivalent to a music CD. MPEG (Moving Picture Experts Group), MPEG-2, MPEG-4 These are the names for digital compression format standards used for the encoding of video and audio.
Contents Connections Playback Settings P Protection circuit This is a function to prevent damage to devices within the power supply when an abnormality such as an overload, excess voltage occurs or over temperature for any reason. In this unit, the standby indicator blinks and the unit enters standby mode when an abnormality occurs. W WEP Key (Network Key) This is key information used for encrypting data when conducting data transfer.
Contents Connections Playback Settings Windows Media DRM This is a copyright protection technology developed by Microsoft. Content providers are using the digital rights management technology for Windows Media contained in this device (WM-DRM) to protect the integrity of their content (Secure Content) so that their intellectual property, including copyright, in such content is not misappropriated. This device uses WM-DRM software to play Secure Content (WM-DRM Software).
Contents Connections Playback Settings Tips Appendix Trademark information Adobe, the Adobe logo and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
Contents Connections Playback Settings Specifications 22Audio section • CD player Playback frequency response: Wow & flutter: Sampling frequency: • Audio amplifier Rated output: Dynamic power: Output terminals: Input sensitivity/impedance: THD+N (1 kHz, 5 W, 6 Ω/ohms): S/N ratio (10 W, 6 Ω/ohms, IHF-A): Tone control: Frequency response: Front panel Rear panel 10 Hz – 20 kHz Below measurable limits (± 0.001%) 44.1 kHz 2-channel driving 50 W + 50 W (6 Ω/ohms, 1 kHz, THD+N 0.
Contents Connections 22Tuner section Playback Settings [FM] 87.50 MHz – 107.90 MHz 1.2 μV / 75 Ω/ohms 30 dB (1 kHz) Monaural 74 dB Stereo 70 dB Monaural 0.3 % Stereo 0.4 % Receiving Range: Usable Sensitivity: Channel separation: S/N ratio: THD+N (1 kHz): Tips Appendix [AM] 520 kHz – 1710 kHz 20 μV 22Wireless LAN Network type (wireless LAN standards): Transfer rate: Security: Used frequency range: No. of channels: Conforming to IEEE 802.11b Conforming to IEEE 802.
Contents Connections Playback Settings Tips Appendix 22Clock/Alarm Clock type: Alarm: Power line frequency synchronized method (Within ±60 seconds per month) Everyday alarm / Once alarm : One system each Sleep timer : Max. 90 minutes 22General Power supply: Power consumption: Power consumption in standby mode: Power consumption in “Network Control” – “On” mode: AC 120 V, 60 Hz 55 W 0.3 W 3W For purposes of improvement, specifications and design are subject to change without notice.
Contents Connections Index Playback Settings vv C vv A Accessories······························································· 5 Add New Feature···················································· 85 Adjusting the master volume·································· 30 AES······································································· 110 AirPlay····························································· 62, 110 ALAC····································································· 110 Alar
Contents Connections vv P Settings vv Q Pandora®·································································· 43 Playback ALAC······························································ 38, 59 ANALOG IN·························································· 61 CD········································································ 31 DATA CD······························································ 34 DIGITAL IN··························································· 61 FLAC·······
Contents Connections Playback Settings License nn Expat This section describes software license used for this unit. To maintain the correct content, the original (English) is used. Expat License. Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd nn Boost http://www.boost.org/ Boost Software License - Version 1.
Contents Connections g. “Standard Version” refers to such a Work if it has not been modified, or has been modified in accordance with the consent of the Author, such consent being in the full discretion of the Author. h. “Work” refers to the collection of files distributed by the Publisher, including the Source Code, Executable Files, binaries, data files, documentation, whitepapers and the Articles. i.
Contents Connections 6. Representations, Warranties and Disclaimer. THIS WORK IS PROVIDED “AS IS”, “WHERE IS” AND “AS AVAILABLE”, WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS OR GUARANTEES. YOU, THE USER, ASSUME ALL RISK IN ITS USE, INCLUDING COPYRIGHT INFRINGEMENT, PATENT INFRINGEMENT, SUITABILITY, ETC.
Contents Connections • Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. • Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Contents Connections nn Tremor http://wiki.xiph.org/index.php/Tremor Copyright (c) 2002, Xiph.org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: • Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Contents Connections Playback Settings Tips Appendix nn zlib nn cURL nn c-ares zlib.h -- interface of the ‘zlib’ general purpose compression library version 1.2.3, July 18th, 2005 COPYRIGHT AND PERMISSION NOTICE Copyright 1998 by the Massachusetts Institute of Technology. http://www.zlib.net/ http://curl.haxx.se Copyright (C) 1995-2004 Jean-loup Gailly and Mark Adler This software is provided ‘as-is’, without any express or implied warranty.
Contents Connections Playback Settings 22License Information for the Software Used in the Unit About GPL (GNU-General Public License), LGPL (GNU Lesser General Public License) License This product uses GPL/LGPL software and software made by other companies. After you purchase this product, you may procure, modify or distribute the source code of the GPL/ LGPL software that is used in the product.
Connections Playback Settings Tips 1 13/16 (46) 22Dimensions Appendix 4 51/64 (122) 1/8 (3) 1 37/64 (36) 11 59/64 (303) 11 13/16 (300) Unit : in. (mm) 8 37/64 (218) Contents 5 1/8 (130) 1 39/64 (41) 22Weight : 7 lbs 8 oz (3.
D&M Holdings Inc.
CD Receiver M-CR610 Start Here Commencez ici Iniciar aquí Quick Setup Guide 1.M-CR610U̲QuickGuide̲ENG̲Final̲0527.
Before you begin What’s In The Box M-CR610 Power cord Remote and batteries Product manual on CD-ROM AM loop antenna FM indoor antenna Required For Setup Network router Speakers Speaker cables Router with WPS Network cable Optional iOS device and USB cable * For detailed instructions or assistance, please refer to the enclosed CD-ROM manual or visit our support site: www.marantz.com 1 1.M-CR610U̲QuickGuide̲ENG̲Final̲0527.
Español Française English 1. Connection Connect the left and right speakers to the M-CR610 Connect the power cord from the M-CR610 to a power outlet Insert the batteries into the remote Note: Please refer to the CD-ROM manual for Speaker A/B and Bi-amp connection options. 2 1.M-CR610U̲QuickGuide̲ENG̲Final̲0527.
2. Connecting to your home network Choose from one of the following options iOS device + USB cable iPod Power on Select language 100% 10:46 AM Search AirPlay Music Pod My favourite iPad Marantz Compilations AV receiver 1. Violin Concerto No.1 D majo Aud 2. Cello Suite #1(Bwv1007),1st m NA-11S1 Marantz Piano Sonata No.11 Metal 4. Concierto de Aranjuez On the go 5. Canon In D Rock 6. Piano Trio No.1 7. String Quintet in C major 8. Pavane [Select Language] 9.
Español Française English Network Control Press the red Wi-Fi CONNECT Button on the back of your M-CR610 This message will appear on your Share Wi-Fi Settings? iOS device Do you want to share your Wi-fi Select “Allow” settings so this accessory can [Network Control] Connected! On Press ENTER to use the Maran...
3. Enjoying your music! Enjoying Internet radio Press the “INTERNET RADIO” button on the remote Select a station Public Popular Stations Largest Cities Enjoying music using Apple AirPlay Tap the AirPlay Icon from within any app that supports AirPlay Select the “Marantz M-CR610” from the AirPlay Device list Note: Make sure your iOS device is on the same network as the M-CR610 5 1.M-CR610U̲QuickGuide̲ENG̲Final̲0527.
Español Française English Download the Marantz Remote App Scan the QR code to download and install the Marantz Remote App using your smartphone and a scanning app or manually search the Apple App store or Google Play store for the “Marantz Remote App” 6 1.M-CR610U̲QuickGuide̲ENG̲Final̲0527.
D&M Holdings Inc. Printed in China 5411 11059 00AM 4.M-CR610U̲QuickGuide̲Final̲BackPage.
