Contents Connections Playback Settings Tips Appendix . Network Receiver M-CR511 You can print more than one page of a PDF onto a single sheet of paper.
Contents Connections Playback Accessories Inserting the batteries Operating range of the remote control unit Features Multiple music formats are supported, all in a compact form factor Easy operation Part names and functions Front/Top panel Rear panel Remote control unit Front/Top panel Rear panel Remote control unit Settings Tips Appendix Connections 6 7 7 8 8 8 9 9 12 14 Speaker connection Connecting the speaker cables Connecting the subwoofer Connecting speakers Connecting a digital device Co
Contents Connections Playback Settings Playback Basic operation Turning the power on Selecting the input source Adjusting the volume Turning off the sound temporarily Listening to Internet Radio Listening to Internet Radio Playing the last played Internet Radio station Using vTuner to add Internet Radio stations to favorites Playing back files stored on a PC and NAS Applying media sharing settings Playing back files stored on a PC and NAS Favorite function Registering stations or files to the favorites
Contents Connections Playback Settings Settings 71 74 75 75 76 77 77 78 78 79 79 80 80 80 81 83 Menu map Menu operation Inputting characters Using the number buttons Using the cursor buttons General Alarm Clock Clock Mode Volume Limit Speaker Response Language Auto-Standby Usage Data Firmware Reset Front/Top panel Network Network Information Network Control Friendly Name Wi-Fi Bluetooth Settings Rear panel Remote control unit 4 Index Tips Appendix 84 84 84 85 85 85 86
Contents Connections Playback Settings Tips 93 95 Tips Troubleshooting Appendix 107 109 109 109 110 111 112 117 118 123 125 Playing back USB memory devices Playing back Internet Radio Playing back Bluetooth devices Bluetooth communications Playing back files stored on PC or NAS Last function memory Explanation of terms Trademark information Specifications Index License Front/Top panel Rear panel Remote control unit 5 Index Tips Appendix
Contents Connections Playback Settings Tips Appendix Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories . Check that the following parts are supplied with the product.
Contents Connections Playback Settings Inserting the batteries Tips Appendix NOTE 0 To prevent damage or leakage of battery fluid: A Remove the rear lid in the direction of the arrow and remove it. 0 Do not use a new battery together with an old one. 0 Do not use two different types of batteries. 0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery compartment and insert new batteries. Operating range of the remote control unit .
Contents Connections Playback Settings Tips Appendix Features Multiple music formats are supported, all in a compact form factor Easy operation 0 Easy wireless connection is possible by pressing the Wi-Fi 0 Supports Internet Radio and music streaming 0 0 0 0 0 Supports AirPlay® (v p. 54) You can enjoy a wide variety of content, including listening to Internet Radio, playing audio files stored on your PC.
Contents Connections Playback Settings Tips Part names and functions Front/Top panel GTop panelH q GFront panelH .
Contents Connections Playback GTop panelH Settings Tips Appendix A N mark (Q) Touch this mark with a Bluetooth device that includes the NFC function when pairing (registering) with it. (v p. 51) q B Cursor buttons (uio p) These select items. C ENTER button This determines the selection. D Display Various information is displayed here. GFront panelH we r t y ui E Remote control sensor This receives signals from the remote control unit. (v p.
Contents Connections Playback Settings Tips Appendix K Power operation button (X) Turns power to this unit on and off (standby). (v p. 29) GFront panelH 0 When “Clock Mode” is turned on, this button switches between normal mode and Clock mode. (v p. 78) . L Headphones jack (PHONES) Used to connect headphones. When the headphones are plugged into this jack, audio will no longer be output from the speaker terminals and SW OUT connector.
Contents Connections Playback Settings Tips Appendix Rear panel q w e .
Contents q Connections w Playback Settings Tips Appendix E USB port (T, Rear) Used to connect iPod or USB memory devices. (v p. 22) e r t F SW OUT connector Used to connect a subwoofer with a built-in amplifier. (v p. 19) G ANALOG IN connectors Used to connect devices equipped with analog audio connectors. (v p. 21) . y u H NETWORK connector Used to connect this unit to the network. (v p. 24) i A AC inlet (AC IN) Used to connect the supplied power cord. (v p.
Contents Connections Playback Settings Tips Appendix Remote control unit A Remote control signal transmitter This transmits signals from the remote control unit. (v p. 7) q w e B CLOCK button The current time appear on the unit. (v p. 69) C SLEEP button This sets the sleep timer. (v p. 69) r D Input source select buttons These select the input source. (v p. 29) t E System buttons These perform playback related operations. Channel buttons (CH +, –) These operate the Favorite function. (v p.
Contents Connections Playback Settings Tips Appendix G FAVORITES ADD / CALL buttons 0 To add radio stations or files to the favorite list, press ADD button. (v p. 40) 0 To call up a radio station or file registered in the favorite list, press CALL button. (v p. 40) H TOP MENU button To back to the top of the menu. (v p. 74) I ENTER button This determines the selection. J Cursor buttons (uio p) These select items. u K SEARCH button This displays the search menu.
Contents Connections Playback Q5 Q6 Settings Tips Appendix O DIMMER button Adjust the display brightness of this unit. (v p. 70) P POWER button (X) This turns the power on/standby. (v p. 29) Q VOLUME buttons (df) These adjust the volume level. (v p. 30) R Information button (INFO) This switches display items such as the artist name and album name in the playback screen. Q7 S MUTE button (O) This mutes the output audio. (v p. 30) T SETUP button The setting menu is displayed on the display. (v p.
Contents Connections Playback Settings o Contents Tips o Cables used for connections Connecting a digital device 20 Connecting an analog device 21 Connecting an iPod or USB memory device to the USB port 22 Connecting to a home network (LAN) 24 Connecting the power cord 27 Provide necessary cables according to the devices you want to connect. Speaker cable . 18 Subwoofer cable . Speaker connection Optical cable .
Contents Connections Playback Settings Tips Appendix Speaker connection Here we connect the speakers in the room to this unit. This section explains how to connect them using typical examples. Connecting the speaker cables Connect the speaker cable to the + speaker terminal (red) and the speaker terminal (black). NOTE 1 Peel off about 10 mm of sheathing from the tip of the speaker cable, then twist the core wire tightly. .
Contents Connections Playback Settings Connecting the subwoofer Tips Connecting speakers Use a subwoofer cable to connect the subwoofer. . .
Contents Connections Playback Settings Connecting a digital device 0 Linear PCM signals with a sampling frequency of 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, or 192 kHz can be input into this device. 0 Do not input signals other than linear PCM signals, such as Dolby digital, DTS, AAC etc. into this device. Doing so may cause noise, which may cause damage to the speakers. Digital device AUDIO .
Contents Connections Playback Settings Connecting an analog device You can connect this unit to various devices with analog audio output.
Contents Connections Playback Settings Tips Appendix Connecting an iPod or USB memory device to the USB port 0 To connect an iPod/iPhone to this unit, use the USB adapter cable that was supplied with the iPod/iPhone. 0 For operating instructions, see “Playing an iPod” (v p. 41) or “Playing files stored on USB memory devices” (v p. 46). iPod USB memory device . or 0 Marantz does not guarantee that all USB memory devices will operate or receive power.
Contents Connections Playback Settings o Supported iPod/iPhone models • iPod classic • iPod nano • iPod touch .
Contents Connections Playback Settings Tips Appendix Connecting to a home network (LAN) You can connect this unit to your home network (LAN) to perform various types of playbacks and operations as follows.
Contents Connections Playback Settings Wireless LAN Modem 0 Built-in DHCP server This function automatically assigns IP addresses on the LAN. 0 Built-in 100BASE-TX switch When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater. 0 Use only a shielded STP or ScTP LAN cable which is easily available at electronics stores. (CAT-5 or greater recommended) 0 The normal shielded-type LAN cable is recommended.
Contents Connections Playback Settings NOTE 0 The types of routers that can be used depend on the ISP. Contact your ISP or a computer shop for details. 0 This unit is not compatible with PPPoE. A PPPoE-compatible router is required if you have a contract for a type of line set by PPPoE. 0 Do not connect a NETWORK connector directly to the LAN port/ Ethernet connector on your computer.
Contents Connections Playback Settings Connecting the power cord After completing all the connections, insert the power plug into the power outlet. Power cord (supplied) .
Contents Connections Playback Settings o Contents Tips Appendix Playback network audio/service Basic operation Listening to Internet Radio 31 29 Playing back files stored on PC or NAS 35 Selecting the input source 29 AirPlay function 54 Adjusting the volume 30 Spotify Connect function 57 Turning off the sound temporarily 30 Turning the power on Other functions Playback a device Favorite function 39 58 Playing an iPod 41 Remote play function Playing a USB memory device 45 We
Contents Connections Playback Settings Tips Appendix Basic operation Turning the power on 1 POWER X Input source select buttons Press POWER X to turn on power to the unit. 0 You can also switch the power to standby by pressing X on the main unit. Selecting the input source 1 VOLUME df MUTE Press the input source select button to be played back. The desired input source can be selected directly. . 0 Press AUX again to switch between AUX:Optical In/AUX:Analog In.
Contents Connections Playback Settings Adjusting the volume 1 Use VOLUME df to adjust the volume. The volume level is displayed. 0 You can also adjust the volume by turning VOLUME df on the main unit. Turning off the sound temporarily 1 Press MUTE O. “MUTING” appears on the display. 0 To cancel mute, either adjust the sound volume or press MUTEO again.
Contents Connections Playback Settings Tips Appendix Listening to Internet Radio 0 Internet Radio refers to radio broadcasts distributed over the Internet. Internet Radio stations from around the world can be received. 0 The broad cast station types and specifications supported by this unit for playback are as follows. INTERNET RADIO 0 WMA 0 MP3 0 MPEG-4 AAC 1/3 FAVORITES ADD/CALL INFO uio p ENTER .
Contents Connections Playback Settings Listening to Internet Radio This unit memorizes the last played Internet Radio station. If you press INTERNET RADIO to switch to the Internet Radio function from another input source, the last Internet Radio station you listened to is played. 1 (v p. 24) 2 3 Displays recommended Internet Radio stations. radiomarantz.com : Displays Internet Radio stations added to favorites in vTuner.
Contents Connections Operation buttons Playback Settings Playback / Stop FAVORITES CALL Call from the Favorite list FAVORITES ADD Add to the Favorite list SEARCH Character search 0 If the list is not in alphabetical order, you may not be able to perform a character search. uiop Select the item ENTER Enter the selected item INFO Switching the file type/ bit rate and radio station name etc. TOP MENU Returns to the top menu of the Internet radio function 1 Press INTERNET RADIO.
Contents Connections Playback Settings Using vTuner to add Internet Radio stations to favorites 5 6 7 Check the MAC address of this unit. “Network Information” (v p. 84) Select the radio station of your choice from the list, and then click the Add to Favorites icon. Enter the name of the favorite group, then click “Go”. A new favorite group that includes the selected radio station is created. 0 Internet Radio stations added to favorites in vTuner can be played from “radiomarantz.com” (v p.
Contents Connections Playback Settings Tips Appendix Playing back files stored on a PC and NAS 0 This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA. 0 The network audio playback function of this unit connects to the server using technologies shown below. MUSIC SERVER 0 Windows Media Player Network Sharing Service 0 This unit can play back the following files.
Contents Connections Playback Settings Tips Appendix Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. If you are using a Media Server, be sure to apply this setting first. o When using Windows Media Player 12 (Windows 7 / Windows 8) 1 2 3 Select “More streaming options...” in the “Stream”. 4 Select “Allowed” in the drop-down list for “Media programs on this PC and remote connections...”.
Contents Connections Playback Settings Playing back files stored on a PC and NAS Operation buttons 2 3 4 Appendix Function Playback / Pause 1/3 Use this procedure to play music files or playlists. 1 Tips (Press and hold) Stop Skip to previous track / Skip to next track Prepare for playback. 89 A Check the network environment, then turn on this unit’s power. “Connecting to a home network (LAN)” (v p. 24) B Prepare the computer (vComputer’s operating instructions).
Contents Connections Playback Settings o Files that can be played back See “Playing back files stored on PC or NAS” (v p. 110). 0 WMA Lossless files can be played when using a server supporting transcoding, such as Windows Media Player Ver. 11 or later. NOTE 0 When playing back music files with your PC or NAS connected through wireless LAN, audio may be interrupted depending on your wireless LAN environment. In this case, play back music files with your PC or NAS connected through wired LAN.
Contents Connections Playback Settings Tips Appendix Favorite function This section provides information on the Favorite function. 0 The Favorite function allows you to register your favorite broadcast stations and files in the Favorite List in advance so that you can call and listen to the stations or files right away, whenever you want. 0 The contents that you can register and call are Internet radio station, music server, USB and iPod (only when using “On-Display” mode).
Contents Connections Playback Settings 2 1 Press FAVORITES ADD while the Internet radio station or file to register is played back. Use CH+, CH– or ui. Deleting stations or files from the favorite list Use ui to select a number to register the station or file, and press ENTER. “Added To Favorites” is displayed and the registration is competed. 1 2 Calling stations or files from the favorites list 1 2 3 Press FAVORITES CALL.
Contents Connections Playback Settings Tips Appendix Playing an iPod 0 You can use the USB cable provided with the iPod to connect the iPod with the unit’s USB port and enjoy music stored on the iPod. 0 For information on the iPod models that can be played back with this unit, see “Supported iPod/iPhone models” (v p. 23). FRONT USB REAR USB 1/3 89 INFO uio p ENTER RANDOM REPEAT .
Contents Connections Playback Settings Listening to music on an iPod 1 2 When you connect iPod to the front USB port, the input source automatically switches to “Front USB”. Press FRONT USB or REAR USB to switch the input source to “Front USB” or “Rear USB”. NOTE 0 Depending on the type of iPod and the software version, some functions may not operate.
Contents Connections Playback Settings Setting operation mode (“On-Display” mode) Operation buttons Use ui to select the file to be played, then press ENTER. Playback starts. Display mode From iPod On-Display P Video file z Active buttons Remote control unit (This unit) P iPod P Function (Press and hold) Stop Skip to previous track / Skip to next track Press MODE and display “On-Display”.
Contents Connections Playback Settings Charging the iPod/iPhone You can charge your iPod/iPhone by connecting it to USB port. o Standby charging If the unit enters power standby mode while the iPod/iPhone is charging, the unit will switch to standby charging mode, and the iPod/ iPhone will continue to be charged. When in standby charging mode, the power indicator lights turns red.
Contents Connections Playback Settings Tips Appendix Playing a USB memory device 0 Playing back music files stored on a USB memory device. 0 Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit. 0 This unit is compatible with USB memory devices in “FAT16” or “FAT32” format. FRONT USB 0 This unit can play back the following files.
Contents Connections Playback Settings Playing files stored on USB memory devices 1 Operation buttons 3 Appendix Function Playback / Pause 1/3 Connect the USB memory device to the USB port. (v p. 22) (Press and Hold) Stop Skip to previous track / Skip to next track When you connect USB memory device to the front USB port, the input source automatically switches to “Front USB”. 2 Tips Press FRONT USB or REAR USB to switch the input source to “Front USB” or “Rear USB”.
Contents Connections Playback Settings Tips Appendix Listening to music on a Bluetooth device Music files stored on Bluetooth devices such as smartphones, digital music players, etc. can be enjoyed on this unit by pairing and connecting this unit with the Bluetooth device. Communication is possible up to a range of about 10 m. Bluetooth NOTE 0 To play back music from a Bluetooth device, the Bluetooth device needs to support the A2DP profile. 1/3 89 INFO ENTER .
Contents Connections Playback Settings Playing music from Bluetooth device 3 In order to enjoy music from a Bluetooth device on this unit, the Bluetooth device must first be paired with this unit. Once the Bluetooth device has been paired, it does not need to be paired again. 1 Appendix Select this unit when its name appears in the list of devices displayed on the screen of the Bluetooth device. Connect to the Bluetooth device while “Pairing Mode” is being displayed on the display of the unit.
Contents Connections Operation buttons 1/3 Playback Settings Function Playback / Pause Skip to previous track / Skip to next track 89 (Press and hold) Fast-reverse / Fastforward 0 Press INFO on the remote control unit during playback to switch the display between Artist name, Album name, etc. 0 Incompatible characters are displayed as “.” (period). NOTE 0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth device needs to support the AVRCP profile.
Contents Connections Playback Settings Pairing with other Bluetooth devices 3 4 Activate the Bluetooth settings on your mobile device. Press SEARCH when the input source is “Bluetooth”. The device will go into the pairing mode. Select this unit when its name appears in the list of devices displayed on the screen of the Bluetooth device.
Contents Connections Playback Settings Reconnecting to this unit from a Bluetooth device 2 3 4 You can just touch this unit with a Bluetooth device to turn on power to this unit and perform pairing or establish a connection between this unit and the Bluetooth device. 1 If a Bluetooth device is currently connected, deactivate the Bluetooth setting of that device to disconnect it. 2 Activate the Bluetooth setting of the Bluetooth device to be connected.
Contents 3 Connections Playback Settings Play back music on the Bluetooth device. This unit outputs music from the Bluetooth device. 0 When “Network Control” is set to “On”, startup and connection can be performed even when the unit power is off. 0 When you touch the N mark (Q) on this unit with the Bluetooth device that is playing back music, this unit outputs that music. 0 Touch the N mark (Q) again during the Bluetooth connection to disconnect the connection.
Connections Playback Settings Tips Appendix Listening to DIGITAL IN . Contents 1 2 3 AUX Prepare for playback. Check the connection, then turn on this units. Press AUX to select “AUX:Optical In”. Play the component connected to this unit. 0 Only 2-channel linear PCM digital audio signals can be inputted through the DIGITAL IN connector of this unit. Listening to ANALOG IN 1 2 3 Front/Top panel Rear panel Remote control unit 53 Prepare for playback.
Contents Connections Playback Settings Tips Appendix AirPlay function Music files stored on your iPhone, iPod touch, iPad or iTunes can be played on this unit via the network. PC Router This unit You can stop AirPlay playback by pressing o or choosing other input source. To see song and artist names together, press INFO on the remote control unit. For information about how to use iTunes, also see the Help for iTunes. The screen may differ depending on the OS and software versions. .
Contents Connections Playback Settings Playing songs from your iPhone, iPod touch or iPad 1 2 Connect your iPhone, iPod touch or iPad Wi-Fi to the same network as this unit. 0 For details, see your device’s manual. 2 Install iTunes 10, or later, on a Mac or Windows PC that is connected to the same network as this unit. Turn this unit ON. Set “Network Control” to “On” for this unit. (v p. 84) NOTE Play the song on your iPhone, iPod touch or iPad.
Contents Connections Playback Settings Selecting multiple speakers (devices) It is possible to play iTunes songs on your home’s AirPlay compatible speakers (devices) other than those of this unit. 1 2 Click the AirPlay icon ' and select “Multiple”. Check the speakers you want to use. NOTE 0 In playback using the AirPlay function, the sound is output at the iPhone, iPod touch, iPad or iTunes volume setting level.
Contents Connections Playback Settings Tips Appendix Spotify Connect function Spotify is the world’s most popular streaming service. If you subscribe to Spotify Premium, you can control your new speaker with your phone or tablet. Because Spotify is built-in to your speaker, you can still take calls or use other apps - the music never stops. For information on how to set up and use Spotify Connect please visit www.spotify.
Contents Connections Playback Settings Tips Appendix Remote play function You can use your home network to play back with this unit music files stored on PC, NAS, smartphones and portable audio players. In this case, you use PC, smartphones and portable audio players for operations. o Roles each device plays The following devices are used for Remote Play. As specified in the DLNA standard, these devices are called DMC, DMS or DMR according to their role.
Contents Connections Playback Settings Configure the settings so that this unit (DMR) can play back music files stored on your portable audio player. For details on the settings, see the owner’s manual of your portable player. You must make settings on DMC and DMS for Remote Play. Make the following settings. Also see the owner’s manual of each device for settings. o Settings on this unit o Settings on computer and NAS Connect this unit to the DLNA network. You do not need to make other settings.
Contents Connections Playback Settings Tips Appendix o Remote Play operations Operations are different for each device, but the procedures for preparing for Remote Play are the same. The preparation procedures are shown below. 1 Turn on this unit. 2 Display the music file playback screen on DMC. 0 Press o to exit Remote Play mode. NOTE 0 During Remote Play, you cannot perform playback operations with this unit. Use the DMC device for these operations.
Contents Connections Playback Settings Tips Appendix Web control function You can control this unit from a web control screen on a web browser. PC Controlling the unit from a web control Router 1 This unit 2 Switch the “Network Control” setting to “On”. (v p. 84) Check the IP address of this unit with “Network Information”. (v p. 84) [Network Information ] IP Address 192.168.0.2 . Checking the IP address. 3 . Tablet Start up the web browser.
Contents 4 Connections Playback Settings 5 Enter the IP address of this unit in browser’s address box. For example, if the IP address of this unit is “192.168.0.2”, enter “http://192.168.0.2”. w http://192.168.0.2 Bonjour apple NETWORK Yahoo! Japan q Appendix When the top menu is displayed, click on the menu item you want to operate. NETWORK FIRMWARE YouTube Wikipedia news(45) Tips e r Please select the menu. Please select the menu. . FIRMWARE .
Contents 6 Connections Playback Settings Operate. FIRMWARE NETWORK Set Test Connection y Set Default u 0 Only characters that can be displayed on this unit can be set. (v p. 75) o n Network connection settings i G Click to change the network connection method. If you select “Wi-Fi”, a new item will appear on-screen. (vGExample 2H) H Click to change DHCP/proxy settings. (vGExample 2H) I Click to connect using the newly applied settings. .
Contents 7 Connections Playback Settings Operate. FIRMWARE Appendix n Network connection settings GExample 2H Network Setting 2 NETWORK Tips J GExample 2H - Displayed when “Wi-Fi” is selected in G. Select or input items as necessary, and then click “Test Connection” to apply the changes. 0 Items displayed may vary depending on selected items and connection status. 0 After selecting each item, wait a moment for the display to be updated.
Contents Connections Playback Settings o Update on web screen 2 “Web control function” (v p. 61) settings must be completed in advance on a computer belonging to the same network. For information on obtaining update files, please contact our customer service center. Appendix When the following screen is displayed by the PC, click the “Choose File” (A) button, select the update file, and click the “Upload” (B) button. Firmware Click D from step 5 for the “Web control function”. (v p.
Contents 4 Connections Playback Settings When the following screen is displayed, updating is complete. Firmware New Firmware: xxx.fw Firmware upload status: 100% completed. . The upload process finished successfully. Please close this. 0 Button names may vary depending on the OS language used on your computer.
Contents Connections Playback Settings Tips Appendix Convenience functions Adjusting the tone SLEEP CLOCK DIMMER DBB/ TONE Sleep timer function 69 Checking the current time 69 Switching the display’s brightness 70 VOLUME df uio p .
Contents Connections Playback Settings 2 Appendix n Treble Adjusting the tone 1 Tips Adjusts the treble sound. Press DBB/TONE to select the tone parameter to be adjusted. –10dB – +10dB (Default : 0dB) n Balance Use ui to adjust the “Dynamic Bass Boost”, “Bass”, “Treble”, “Balance” or “S.Direct”. Use op to adjust the left/right volume balance. n S.Direct n Dynamic Bass Boost The “Dynamic Bass Boost”, “Bass”, “Treble” and “Balance” are not adjusted.
Contents Connections Playback Settings Sleep timer function Appendix Checking the current time You can have the power automatically switched to standby once a set time has elapsed. This is convenient for listening while going to sleep. 1 Tips o Checking the current time when the power is on Press SLEEP during playback and select the setting time. Press CLOCK. 0 Press once more and the display returns to its original condition. 0 The o indicator on the display lights.
Contents Connections Playback Settings Switching the display’s brightness 1 Press DIMMER. 0 The brightness of the display switches each time the button is pressed (5 levels). 0 If the buttons are operated when the display is turned off, information is displayed temporarily at a low brightness level.
Contents Connections Playback Settings Tips Appendix Menu map For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. o Quick Setup Setting items Quick Setup Front/Top panel Description Performs the network settings using a Wizard style window. For details on the operations, see the separate “Quick Setup Guide”.
Contents Connections Playback Settings Tips Appendix o General Setting items Description Page Alarm Sets the timer playback. 77 Clock Sets the current time. 78 Clock Mode The clock is constantly displayed. 78 Volume Limit Make a setting for maximum volume. 79 Speaker Response Set the output frequency characteristics. 79 Language Sets the language for display the menu. 80 Auto-Standby Sets the unit power to standby when the unit is not in use.
Contents Connections Playback Settings Tips Appendix o Network Setting items Description Page Network Information Displays various information about the network. 84 Network Control Performs the ON/OFF settings for the network function when in standby mode. 84 Friendly Name Edits a name displayed on the Internet. 85 Wi-Fi Enables/disables the Wi-Fi function. 85 Bluetooth Enables/disables the Bluetooth function. 85 Settings Performs the settings for a wired or wireless LAN.
Contents Connections Playback Settings Tips Appendix Menu operation 1 2 3 4 Press SETUP. The menu is displayed. Use uiop to select the menu to be set or operated, then press ENTER. Use ui to change to desired setting. Press ENTER to enter the setting. 0 To return to the previous item, press o. 0 Exiting the Menu, press SETUP while the menu is displayed. TOP MENU uio p ENTER The menu display disappears. 0 To back to the top of the menu, during menu operation, press TOP MENU. .
Contents Connections Playback Settings Tips Appendix Inputting characters On this unit, you can change the name displayed on the following screens to the names that you prefer. 0 Friendly Name (v p. 85) 0 Character input for the network functions (v p. 32) Using the number buttons 1 3 Display the screen for inputting characters. 0 To change a character, use op to align the cursor with the 0 The types of characters that can be input are as shown below. character that you want to change.
Contents Connections Playback Settings Using the cursor buttons 1 Display the screen for inputting characters. 0 To change a character, use op to align the cursor with the character that you want to change. 2 Use ui to change the character. 0 The types of characters that can be input are as shown below. GLower caseH abcdefghijklmnopqrstuvwxyz GUpper caseH ABCDEFGHIJKLMNOPQRSTUVWXYZ !“#$%&‘()z+,-./:;<=>?@ [\]^_`{|}~ GNumbersH 0123456789 (Space) .
Contents Connections Playback Settings Tips Appendix General Make various other settings. o Edit Alarm Alarm Edit the once alarm and everyday alarm. Set the once alarm and everyday alarm. 1 2 o Once Once Alarm Setting: Set the once alarm to on. Off: The alarm does not operate. 3 o Every Day Every Day: Set the everyday alarm to on. Off: The alarm does not operate. Use ui to select the alarm mode, then press ENTER. Use ui to setting for the alarm start time, then press ENTER.
Contents Connections Playback Settings Clock The clock is constantly displayed. You can automatically adjust the clock of this unit using the Internet. 0 To use this function, the unit must be connected to the Internet. Use ui to select your time zone, then press ENTER. Use ui to select the summer time, then press ENTER. On: Set the summer time to on. Off (Default): Set the summer time to off.
Contents Connections Playback Settings Volume Limit Tips Appendix Speaker Response Set the output frequency characteristics. Flat Properties are flat. (Default) : o Make a setting for maximum volume Limits the volume to ensure safe use of this product, and also makes it easier to adjust the volume from AirPlay or an app to an ideal range. 30 / 45 / 60(Full throttle) / Other (Default : 30) When “Other” is selected, the volume upper limit can be set within the range of 16 - 60.
Contents Connections Playback Settings Language Appendix Usage Data Set the language for display on the menu. For product improvement purposes, please send information on the device settings and operating conditions of the functions to Marantz. Information provided by customers will be used as reference material for product development purposes in the future. Marantz will never provide any information we collect to third parties.
Contents Connections Playback Settings Tips Appendix o Notifications Firmware Notification messages are displayed in the screen when the power is switched on when new firmware can be used, or when there are other notification messages. Set whether or not to check for firmware update, update the firmware, and display update, upgrade and alert notifications. o Update Update Update the firmware of this unit. Check For Update: Check for firmware updates. On (Default): Display update message.
Contents Connections Playback Settings o Add New Feature Appendix Notes concerning use of “Update” and “Add New Feature” 0 In order to add new functions, the environment and settings required Display new features that can be downloaded to this unit and perform an upgrade. Upgrade package: Display the items to be upgraded. Upgrade Status: Display a list of the additional functions provided by the upgrade. Upgrade Start: Execute the upgrade process.
Contents Connections Playback Settings Reset Perform this procedure if the display is abnormal or if operations cannot be performed. Various settings are reset to the factory default values. Make settings again. Cancel: Values are not reset. Reset factory defaults: Values are reset.
Contents Connections Playback Settings Tips Appendix Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network via DHCP, set “DHCP” to On (use the default setting). This allows this unit to use your home network. If you assign an IP address for each device, you must use the “IP Address” setting to assign an IP address to this unit and enter the information about your home network such as the gateway address and subnet mask.
Contents Connections Playback Settings Friendly Name Tips Appendix Wi-Fi The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your preferences. You can stop the Wi-Fi function when connecting this unit to the network using Wired LAN. o Select Name Enabled (Default): The Wi-Fi function is used. Disabled: The Wi-Fi function is stopped. Selects Friendly Name from the list.
Contents Connections Playback Settings Set the IP address within the ranges shown below. 0 The Network Audio function cannot be used if other IP addresses are set. CLASS A: 10.0.0.1 - 10.255.255.254 CLASS B: 172.16.0.1 - 172.31.255.254 CLASS C: 192.168.0.1 - 192.168.255.254 You can make detailed settings for the network. To change the network environment, perform “Quick Setup”. (For details on the operations, see the separate “Quick Setup Guide”.
Contents Connections Playback Settings Tips Appendix o Wi-Fi Setup Method n Proxy Make this setting when connecting to the Internet via a proxy server. Make the proxy settings only when you connect to the Internet via a proxy server that is on your internal network or provided by your provider, etc. Proxy (Off) or Proxy Set the proxy server. (On): In this menu, Wi-Fi settings and connections can be made using any of the five connection methods.
Contents Connections Playback Settings n Auto-Scan You can use an iOS device such as an iPhone or iPad to configure WiFi settings. After selecting this item, select Settings/Wi-Fi from the iOS device home screen, select “Marantz M-CR511” displayed at the bottom of the screen, and then follow the setting instructions displayed on the iOS device. For details, see the “Quick Setup Guide”. From the list of the networks, select the one you want to connect to.
Contents Connections Playback Settings n Web Browser Setup 3 Use a web browser to set up Wi-Fi. A Wi-Fi device that can perform web browse operations is required. Appendix Enter the IP address of this unit in browser’s address box. Read the precautions on the screen, and press ENTER. w http://192.168.1.16 Bonjour apple Yahoo! Japan q YouTube Wikipedia news(45) Please select the menu. NETWORK Select “Marantz M-CR511” from the Wi-Fi network list of the Wi-Fi device. . The IP address (192.
Contents Playback Settings Operate. NETWORK NETWORK NETWORK Friendly Name Friendly Name Network Connection Select Connection Select Connection Conn Appendix GExample 2H Network Setting 2 GExample 1H Network Setting 1 NETWORK Tips Network Connection Select Connection Manual SSID Security Security Key Defaullt Key r Test Connecti Connection Wi-Fi --None t Key1 Test Connection . .
Contents Connections Playback Settings n Manual Sets the wireless connection manually Input the name of the wireless network SSID : (SSID). Security: Select the encryption method according to the encryption setting of the access point you are using. Default Key: Select the Default Key. 0 When connecting to a “WEP” encrypted network, “Default Key” menu is displayed. Password: Input the password. DHCP/Proxy: Performs the DHCP and proxy setting. (“DHCP” (v p. 86), “Proxy” (v p.
Contents Connections Playback Settings o Contents Tips Appendix Troubleshooting Tips Power does not turn on / Power is turned off 95 93 LED is flashing 95 Simple operations for iPod/USB 93 Operations cannot be performed through the remote control unit 96 I only want to recharge my iPod 93 Display on this unit shows nothing 96 Specifying the iPod track with the alarm function 93 No sound comes out 97 Specifying the desired track with the alarm function 93 Desired sound does not co
Contents Connections Playback Settings Tips Appendix Tips Simple operations in the power off state 0 When a input source select buttons, 1/3 button or FAVORITES CALL button is pressed, the operation is performed at the same time as the unit switches on. (“Basic operation” (v p. 29), “Favorite function” (v p. 39)) 0 When the “Network Control” is set to “On”, you can perform playback, or other operations through AirPlay, “Marantz Hi-Fi Remote”. (v p.
Contents Connections Playback Settings Tips Appendix Changing or resetting the network environment 0 Prepare the provided Quick Setup Guide, and run Setup – “Quick Setup”. For detailed settings, run Setup - “Network” - Settings. (v p.
Contents Connections Playback Settings Tips Appendix Troubleshooting 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
Contents Connections Playback Settings Tips Appendix o Operations cannot be performed through the remote control unit Symptom Operations cannot be performed through the remote control unit. Cause / Solution 0 Batteries are worn out. Replace with new batteries. Page 7 0 Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°. 7 0 Remove any obstacle between this unit and the remote control unit.
Contents Connections Playback Settings Tips Appendix o No sound comes out Symptom No sound comes out of speakers. Cause / Solution 0 Check the connections for all devices. 18 0 Insert connection cables all the way in. - 0 Check that input connectors and output connectors are not reversely connected. - 0 Check cables for damage. - 0 Check that speaker cables are properly connected. Check that cable core wires come in contact with the 18 0 Check that a proper input source is selected.
Contents Connections Playback Settings Tips Appendix o Desired sound does not come out Symptom Cause / Solution Page Left/right volume balance is 0 Press the DBB/TONE button on the remote control to adjust the balance. unbalanced. 68 No sound from the sub woofer. 19 0 Check the subwoofer connections. 0 Switch the subwoofer power on. - Set values are not reflected 0 “Dynamic Bass Boost”, “Bass” and “Treble” setting values are not reflected in subwoofer out.
Contents Connections Playback Settings Tips Appendix o Sound is interrupted or noise occurs Symptom During playback from the Internet radio or USB memory device, sound is occasionally interrupted. When making a call on iPhone, noise occurs in audio output on this unit. Cause / Solution - 0 The network communication speed is slow or the radio station is busy. - 0 When making a call, keep a distance of 20 cm or longer between iPhone and this unit.
Contents Connections Playback Settings Tips Appendix o iPod cannot be played back Symptom Cause / Solution iPod cannot be connected. 0 When using iPod by connecting it to the USB port, some iPod variations are not supported. - 0 This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN). Connect it to 24 0 The firmware on iTunes / iPhone / iPod touch / iPad is not compatible with AirPlay.
Contents Connections Playback Settings Tips Appendix o USB memory devices cannot be played back Symptom “No Connection” is displayed. Cause / Solution 0 The set cannot recognize a USB memory device. Disconnect and reconnect the USB memory device. 0 USB memory devices of a mass storage class or those compatible with MTP are supported. - - 0 The USB memory device must be formatted to FAT16 or FAT32. - 0 Not all USB memory devices are guaranteed to work. Some USB memory devices are not recognized.
Contents Connections Playback Settings Tips Appendix o Bluetooth cannot be played back Symptom Bluetooth devices cannot be connected to this unit. NFC connection fails The sound is cut off. Cause / Solution - 0 Bring the Bluetooth device near to this unit. - Bluetooth device to enable the Bluetooth function. 0 The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile. - 0 Turn the power of the Bluetooth device off and on again, and then try again.
Contents Connections Playback Settings Tips Appendix o File names on the iPod/USB memory device are not displayed properly Symptom The file names are not displayed properly (“…”, etc.). Front/Top panel Cause / Solution 0 Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters that cannot be displayed are replaced with a “.” (period).
Contents Connections Playback Settings Tips Appendix o The Internet radio cannot be played back Symptom Cause / Solution Page The radio station list is not displayed. 0 The LAN cable is not properly connected, or the network is disconnected. Check the connection status. 24 Internet Radio cannot be played. 0 The selected radio station is broadcasting in a format that is not supported by this unit. Formats that can 109 be played back in this unit are MP3, WMA and AAC.
Contents Connections Playback Settings Tips Appendix o Music files on PC or NAS cannot be played back Symptom Files stored on a computer cannot be played. Cause / Solution 0 Files are stored in a non-compatible format. Record in a compatible format. 0 You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be played on this unit. Music files on PC cannot be played back. - 36 0 The computer’s or router’s firewall is activated.
Contents Connections Playback Settings Tips Appendix o Cannot connect by Wi-Fi Symptom Cannot connect to the network. Cause / Solution 90 0 Reduce the distance between the wireless LAN access point and this unit, remove any obstructions and - 0 Check the router power supply. - according to the setting details of this unit. make sure the view to the access point is unobstructed before trying to connect again. Also, install microwave ovens and other network access points as far away as possible.
Contents Connections Playback Settings Sampling frequency 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit is compatible with WMA META tags. 0 If the image size of an album artwork exceeds 600 kB, then music may not be played back properly. WMAz1 32/44.1/48 kHz MP3 32/44.1/48 kHz WAV 32/44.1/48/ 88.2/96/176.4/ 192 kHz MPEG-4 AACz2 32/44.
Contents Connections Playback Settings Tips Appendix o Maximum Number of Playable Files and Folder z1 Copyright-protected files can be played on certain portable players compatible with MTP. z2 Only files that are not protected by copyright can be played on this unit. Content downloaded from pay sites on the Internet are copyright protected. Also, files encoded in WMA format when ripped from a CD, etc. on a computer may be copyright protected, depending on the computer’s settings.
Contents Connections Playback Settings This unit supports the following Bluetooth profiles. 0 A2DP (Advanced Audio Distribution Profile) : When a Bluetooth device that supports this specification is connected, you can perform high quality streaming distribution of monaural and stereo audio data. 0 AVRCP (Audio/Video Remote Control Profile) : When a Bluetooth device that supports this specification is connected, you can operate the Bluetooth device from this unit.
Contents Connections Playback Settings Sampling frequency 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit is compatible with WMA META tags. 0 If the image size of an album artwork exceeds 600 kB, then music may not be played back properly. 0 A server or server software compatible with distribution in the WMA 32/44.1/48 kHz MP3 32/44.1/48 kHz WAV 32/44.1/48/ 88.2/96/176.4/ 192 kHz MPEG-4 AACz1 32/44.
Contents Connections Playback Settings Rear panel Remote control unit Appendix Last function memory z1 Only files that are not protected by copyright can be played on this unit. Content downloaded from pay sites on the Internet are copyright protected. Also, files encoded in WMA format when ripped from a CD, etc. on a computer may be copyright protected, depending on the computer’s settings. z2 Copyright [2012] [D&M Holdings. Inc.] Licensed under the Apache License, Version 2.
Contents Connections Playback Settings Explanation of terms FLAC stands for Free lossless Audio Codec, and is a lossless free audio file format. Lossless means that the audio is compressed without any loss in quality. The FLAC license is as shown below.
Contents Connections Playback Settings THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Contents Connections Playback Settings Appendix o Network Sampling frequency Sampling involves taking a reading of a sound wave (analog signal) at regular intervals and expressing the height of the wave at each reading in digitized format (producing a digital signal). The number of readings taken in one second is called the “sampling frequency”. The larger the value, the closer the reproduced sound is to the original.
Contents Connections Playback Settings Tips Appendix vTuner WPA2 (Wi-Fi Protected Access 2) This is a free online content server for Internet Radio. For inquiries about this service, visit the vTuner site below. vTuner website: http://www.radiomarantz.com This product is protected by certain intellectual property rights of Nothing Else Matters Software and BridgeCo.
Contents Connections Playback Settings o Others Pairing Pairing (registration) is an operation that is required in order to connect a Bluetooth device to this unit using Bluetooth. When paired, the devices authenticate each other and can connect without mistaken connections occurring. When using Bluetooth connection for the first time, you need to pair this unit and the Bluetooth device to be connected.
Contents Connections Playback Settings Tips Appendix Trademark information . . The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Inc. is under license. Other trademarks and trade names are those of their respective owners. .
Contents Connections Playback Settings Specifications o Audio section 0 Audio amplifier Rated output: 2-channel driving 50 W + 50 W (6 Ω/ohms, 1 kHz, THD+N 0.7 %) Dynamic power: 60 W + 60 W (6 Ω/ohms, 1 kHz, THD+N 10 %) Output terminals: Speaker: 4-16 Ω/ohms (impedance) Compatible with headphones/stereo headphones Input sensitivity/impedance: Analog In: 200 mV/22 kΩ/kohms Total harmonic distortion (1 kHz, 5 W, 6 Ω/ohms): Analog In: 0.
Contents Connections Playback Settings Tips o Wireless LAN section Network type (wireless LAN standard): Security: Conforming to IEEE 802.11b Conforming to IEEE 802.11g Conforming to IEEE 802.11n (Wi-Fi® compliant)z1 WEP 64 bit, WEP 128 bit WPA/WPA2-PSK (AES) WPA/WPA2-PSK (TKIP) Radio frequency: 2.4 GHz No. of channels: 1 – 13 ch z1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.
Contents Connections Playback Settings Tips Appendix o Bluetooth section Communications system: Bluetooth Version 2.1 + EDR (Enhanced Data Rate) Transmission power: Maximum 2.5 mW (Class 2) Maximum communication range: Approx. 10 m in line of sightz2 Frequency band: 2.4 GHz band Modulation scheme: FHSS (Frequency-Hopping Spread Spectrum) Supported profiles: A2DP (Advanced Audio Distribution Profile) 1.2 AVRCP (Audio Video Remote Control Profile) 1.
Contents Connections Playback Settings Tips o Clock/Alarm/Sleep Clock type: Power line frequency synchronized method (Within ±60 seconds per month) Alarm: Once alarm/Everyday alarm: One system each Sleep: Sleep timer: Max. 90 minutes o General Power supply: AC 220 - 230 V, 50/60 Hz Power consumption: 50 W Power consumption in standby mode : 0.
Contents Connections Playback Settings Tips o Dimensions 2 36 218 302 46 Unit : mm 6 71 292 30 210 35 . 35 o Weight : 2.
Contents Connections Index Playback Settings vI vA AirPlay ............................................................ 54 Alarm .............................................................. 77 Bluetooth device ............................................ 47 vR Random playback .................................... 37, 46 Internet Radio ................................................. 31 Rear panel ...................................................... 12 iPod ....................................
Contents Connections Playback Settings vV Volume ........................................................... 30 vTuner ............................................................ 34 vW Web control function ...................................... 61 Wired LAN ......................................................
Contents Connections Playback Settings Tips Appendix License This section describes software license used for this unit. To maintain the correct content, the original (English) is used.
Contents Connections Playback Settings Definitions. “Articles” means, collectively, all articles written by Author which describes how the Source Code and Executable Files for the Work may be used by a user. “Author” means the individual or entity that offers the Work under the terms of this License. “Derivative Work” means a work based upon the Work or upon the Work and other pre-existing works.
Contents Connections Playback Settings You may distribute the Executable Files and Source Code only under the terms of this License, and You must include a copy of, or the Uniform Resource Identifier for, this License with every copy of the Executable Files or Source Code You distribute and ensure that anyone receiving such Executable Files and Source Code agrees that the terms of this License apply to such Executable Files and/or Source Code.
Contents Connections Playback Settings http://www.xiph.org/vorbis/ Copyright (c) 2002-2004 Xiph.org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 0 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Contents Connections Playback Settings 0 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 0 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 0 Neither the name of the Xiph.
Contents Connections Playback Settings http://curl.haxx.se COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1996 – 2011, Daniel Stenberg, . All rights reserved. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
Contents Connections Playback Settings o License information for the software used in the unit About GPL (GNU-General Public License), LGPL (GNU Lesser General Public License) License This product uses GPL/LGPL software and software made by other companies. After you purchase this product, you may procure, modify or distribute the source code of the GPL/LGPL software that is used in the product.
. 3520 10404 00AM Copyright ©2015 D&M Holdings Inc. All Rights Reserved.