ESPAÑOL FRANÇAIS ENGLISH AV Surround Receiver SR5005
ESPAÑOL n SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ENGLISH FRANÇAIS ESPAÑOL n NOTES ON USE / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO WARNINGS AVERTISSEMENTS ADVERTENCIAS • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust. • Unplug the power cord when not using the unit for long periods of time. • Do not obstruct the ventilation holes.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Thank you for purchasing this Marantz product. To ensure proper operation, please read this user guide carefully before using the product. After reading them, be sure to keep them for future reference. Contents Simple version (Simple setup guide)···························3 Basic version· ·········································································12 Accessories Check that the following parts are supplied with the product.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Features Fully Discrete, identical quality and power for all 7 channels (100 W x 7ch, 8Ω) The unit is equipped with a power amplifier that plays back highfidelity sound in surround mode with equal quality and power for all channels, true to the original sound. The power amplifier circuit adopts a discrete-circuit configuration that achieves high-quality surround sound play back. Supports HDMI 1.4a with 3D, ARC, Deep Color, x.v.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH 1 2 Install (vpage 4) 3 Connect (vpage 4) 4 Turn on power (vpage 6) 5 Set up speakers Play back disc Use the setup microphone (ACM1H) included with the product, for automatic setup. Enjoy Blu-ray Disc and DVD in surround sound. (vpage 6) Basic version Here, we explain the entire setup procedure, from unboxing the unit to using it in a home theater.
ENGLISH DEUTSCH FRANÇAIS ITALIANO 1 Install ESPAÑOL 1 2 3 4 5 This unit can perform 2.0/2.1 to 7.1-channel surround playback. This page provides the speaker installation procedure for the 7.1-channel playback using surround back speakers as an example. The default setting is 7.1-channel. You can also perform 5.1-channel playback. To perform 5.1-channel playback, connect 5.1-channel speakers only.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Blu-ray Disc player and TV TV Basic version Use only an HDMI (High-Definition Multimedia Interface) cable that bears the HDMI logo (a certified HDMI product). Using a cable without the HDMI logo (an uncertified HDMI product) may result in abnormal playback. When outputting Deep Color or 1080p, etc., we recommend you use a “High Speed HDMI cable” or a “High Speed HDMI cable with Ethernet” for enhanced high-quality playback.
ENGLISH DEUTSCH FRANÇAIS 3 Turn on power 1 Turn on the TV and subwoofer power. Power on the TV input to the input of 2 Change this unit. 3 Press ON to turn on power to the unit. The power indicator switches off, and power is supplied to the unit. Power on ITALIANO ESPAÑOL 1 2 3 4 5 NEDERLANDS SVENSKA 4 Set up speakers (Audyssey® Auto Setup) 2 3 4 5 The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Set up speakers (Audyssey® Auto Setup) GExample qH GExample wH FL SW C FL SW C FR ( : Measuring positions) SBL SL SR SBL SBR nn Set up the operation mode Press AMP to set the remote control unit to amplifier operation mode.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Set up speakers (Audyssey® Auto Setup) Preparation 4 Connect the setup microphone to the SETUP MIC jack of this unit. Step 1 Speaker Detection 3-1.Audyssey Auto Setup MultEQ Please place microphone at ear height at main listening position. F.Height : Measure Front Sp. : A Amp Assign: Normal Start Cancel [ENT]:Select [RTN]:Back The setting method for 7.1-channel playback using the surround back speakers is described here.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Set up speakers (Audyssey® Auto Setup) Calculating Step 4 Step 5 Check Simple version Step 3 Finish Store Unplug the setup microphone from Use ui to select the item you want Use ui to select “Store” and then the screen, use ui 10 On 11 13 14 the unit’s SETUP MIC jack. to check, and then press ENTER . press ENTER . to select “Calculate”, and then press ENTER. 15 Set Dynamic Volume®.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Error messages Parameter Check An error message is displayed if Audyssey® Auto Setup could not be completed due to speaker placement, the measurement environment, etc. If this happens, check the relevant items, be sure to take the necessary measures, then perform Audyssey Auto Setup over again. This function enables you to check the measurement results and equalizer characteristics after Audyssey Auto Setup.
SVENSKA NEDERLANDS ESPAÑOL 1 Press BD two times in a row to switch an input source for a player used for playback. Make the necessary settings on the player (language setting, subtitles setting, etc.) beforehand. 2 3 4 DEUTSCH ENGLISH 5 When power is switched to standby Press STANDBY. GPower indicator status in standby modeH • Normal standby : Red • When “HDMI Control” is set to “ON” : Orange Basic version the component connected to 2 Play this unit.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Basic version Basic version Here, we explain the connections and basic operation methods for this unit. F Connections vpage 13 F Playback (Basic operation) vpage 22 F Selecting a listening mode (Surround mode) vpage 29 nnRefer to the pages indicated below for information on connecting and playing back the various media and external devices.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Simple version Connections Important information • Make connections as follows before using this unit. Select an appropriate connection type according to the components to be connected. • You may need to make some settings on this unit depending on the connection method. Refer to each description for more information. • Select the cables (sold separately) according to the components being connected.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL Important information How the on-screen display appears in accordance with the video input signal The way the on-screen display of the menus, status, etc., is displayed differs according to the type of video signal input to this unit. nnWhen video signals are input from the HDMI or component video connector • Menu: Switches to a screen with a black background and the menu is superimposedz. • Status display: Not displayed.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Connecting an HDMI-compatible device NOTE • To enable the ARC function,set “HDMI Control” to “ON” (vpage 58). • When connecting a TV that does not support the ARC function, a separate connection using an audio cable is required. In this case, refer to “Connecting a TV” (vpage 16) for the connection method. NOTE To enable the Content type, set “Video Mode” to “Auto” (vpage 49).
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL Connecting a TV To listen to TV audio through this device, use the optical digital connection. NOTE This connection is not required when a TV compatible with the ARC function (Audio Return Channel (HDMI 1.4a standard function)) is connected to this unit via an HDMI connection. For details, see “About ARC (Audio return channel) function” (vpage 15) or refer to the instruction manual for your TV.
SVENSKA NEDERLANDS Cables used for connections Cables used for connections Video cable (Yellow) Audio cable (sold separately) (Green) Y Y (Blue) PB PB (Red) PR PR Audio cable (White) L L (Red) R R (White) L L (Red) R R Basic version Coaxial digital cable ENGLISH Connecting a video cassette recorder Video cassette recorder Audio cables (sold separately) Audio cable DEUTSCH • You can record video onto a video cassette tape.
ENGLISH DEUTSCH FRANÇAIS ITALIANO Connecting a digital camcorder • You can enjoy video and audio from a digital comcorder. • You can enjoy games by connecting a game machine via the AUX1 input connector. In this case, select the input source to “AUX1”. • For instructions on HDMI connections, see “Connecting an HDMIcompatible device” (vpage 14). Cables used for connections (Yellow) NEDERLANDS SVENSKA Connecting a wireless receiver (RX101) Connecting a CD player • You can enjoy CD sound.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Simple version Connecting an iPod or USB memory device to the USB Port You can enjoy music, stored on an iPod or USB memory device.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Connecting an antenna Connecting an FM/AM antenna Connecting a SIRIUS connector • Connect the FM antenna or AM loop antenna supplied with the unit to enjoy listening to radio broadcasts. • After connecting the antenna and receiving a broadcast signal (vpage 27 “Listening to FM/AM broadcasts”), fix the antenna with tape in a position where the noise level becomes minimal. • This unit is a SIRIUS Satellite Radio Ready® receiver.
SVENSKA Connecting an antenna Keep the power cord unplugged until the SiriusConnect Home Tuner connection have been completed. nnPositioning the antenna For a consistent satellite signal, the antenna must be positioned correctly. Use the following map to determine which area you are in and position the antenna accordingly.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Playback (Basic operation) nnUsing the “Source Select” menu nn Selecting the input source (vpage 22) nn Adjusting the master volume (vpage 22) nn Turning off the sound temporarily (vpage 22) nn Playing a Blu-ray Disc player/DVD player (vpage 23) nn Playing a CD player (vpage 23) nn Playing an iPod® (vpage 23) nn Playing a USB memory device (vpage 24) nn Tuning in radio stations (vpage 25) Selecting a listening mode (Surround mode) (vpage 29
SVENSKA The following describes the procedure for playing Blu-ray Disc player/ DVD player. 1 Prepare for playback. q Turn on the power of the TV, You can play back both video, photo and audio. 4 Play the component connected to this unit. Make the necessary settings on the player (language setting, subtitles setting, etc.) beforehand. The following describes the procedure for playing CD player. 1 Prepare for playback. q Turn on the power of the subwoofer and player. w Load the disc in the player.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Playing a USB memory device Playing back music files recorded on a USB memory device. Playing files stored on USB memory devices Important information nnUSB memory devices A USB memory device can be connected to the USB port of this unit to play music files stored on the USB memory device. • Only USB memory devices conforming to mass storage class can be played on this unit.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Important information nnAbout SIRIUS XM radio To listen to Satellite Radio, you’ll need to connect either a SIRIUS or XM Satellite Radio tuner (sold separately) to your satellite-ready receiver. Satellite Radio is available to residents of the US (except Alaska and Hawaii) and Canada. Listening to SIRIUS satellite radio SATR twice to switch the 1 Press input source to “SIRIUS”. TUNING + or TUNING – to 2 Use select the channel.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Tuning in radio stations nnPresetting radio channels (Preset memory) Your favorite broadcast channels can be preset so that you can tune them in easily. Up to 56 channels can be preset. in the broadcast channel 1 Tune you want to preset. 2 Press MEMORY. SHIFT to select the block 3 Press (A to G) in which to preset the channel (1 to 8 per block), then press PRESET +, PRESET – or 1 – 8 to select the preset number.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Tuning in radio stations Listening to FM/AM broadcasts Operation buttons Function PRESET +, – Preset channel selection Cursor operation / Category search uio p ENTER To parental lock password check screen (Press and hold) Direct search Return Channel selection 0–9 Preset channel selection (1 – 8) / Channel direct call SHIFT MEMORY TV POWER TV INPUT Preset channel block selection Preset memory registration TV power on/standby (Default
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Tuning in radio stations nnListening to preset stations 1 PRESET +, PRESET – or 2 Press 1 – 8 to select the desired preset Press SHIFT/TOP MENU to select the memory block (A to G). channel. nnTuner (FM/AM) operation Operation buttons PRESET +, – uio p ENTER SEARCH BAND T.MODE TUNING +, – 0–9 SHIFT MEMORY TV POWER TV INPUT You can also operate via the main unit. In this case, perform the following operations.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH This unit can play input audio signals in multi-channel surround mode or in stereo mode. Select a listening mode suitable for the playback contents (cinema, music, etc.) or according to your liking.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Multi-channel playback nnSurround playback of multi-channel sources (Dolby Digital, DTS etc.) Playing the source (vpage 23 – 1 27). Press SURR. to select the 2 surround decoder to play back multichannel sound. Select the surround mode while viewing the display on the screen (v“Displaying the currently playing surround mode” at right).
SVENSKA Stereo playback begins. ITALIANO Direct playback Sound recorded in source is played as is. • Surround back signals or front height signals are not created. • In this mode, the following items cannot be adjusted. • Tone (vpage 53) • MultEQ® (vpage 53) • Dynamic EQ® (vpage 54) • Dynamic Volume® (vpage 54) • M-DAX (vpage 55) the source (vpage 23 1 Playing – 27). Press P.DIRECT to select the 2 direct mode.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Advanced version Advanced version Here, we explain functions and operations that let you make better use of this unit. F Speaker installation/connection (Other than 7.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH This section explains a wide range of speaker installation/connection/setting procedures. For details on installing/connecting/setting 7.1 channel audio that uses surround back speakers, see “Simple version (Simple setup guide)” (vpage 3). Use the Audyssey® Auto Setup function of this unit to automatically detect the number of connected speakers and perform optimal settings for the speakers to be used. When 7.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Connect • For the method of connecting the 7.1-channel system with surround back speakers, see page 4. • For the method of connecting the TV, see page 5. 7.1-channel (Front height speaker) connection For 7.1-channel (Front height speaker) playback, set “Amp Assign” in “Set up speakers” (vpage 37) to “Normal”. 6.1-channel (Surround back speaker) connection If a single surround back speaker is to be used (with a 6.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Connect Front A/B connection The second set of front speakers can be connected to the FRONT B/HEIGHT terminals. In this case, set “Front Speaker Setup” (vpage 58) of “Speaker Setup” to “B” or “A+B”. Simple version 5.1-channel connection For 5.1-channel playback, set “Amp Assign” in “Set up speakers” (vpage 37) to “Normal”.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Connect Bi-amp connection 2.1-channel/2-channel connection A bi-amp connection is to connect separate amplifiers to the tweeter terminals and woofer terminals of speakers compatible with the bi-amp function. This prevents the back electromotive force (returned force without output) of the woofer sent to the tweeter, which affects the sound quality of the tweeter, and you can enjoy playback with higher-quality sound.
SVENSKA NEDERLANDS ESPAÑOL Set up speakers ITALIANO FRANÇAIS DEUTSCH ENGLISH around items indicate the settings. Simple version This section provides the setup methods of speaker systems other than the 7.1-channel system (with surround back speakers). For the setup methods of the 7.1-channel system with surround back speakers, see “Set up speakers (Audyssey® Auto Setup)” (vpage 6) of “Simple version”. First install and connect the speakers to this unit. 1 Set up the remote control unit 3 3-1.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Connections (Advanced connection) REMOTE CONTROL jacks RS-232C connector When you use this unit connected to Marantz audio components, it sends operation signals to operate each component. nnConnection Use the remote connection cable (supplied with a Marantz audio component you want to connect) to connect the REMOTE CONTROL OUT terminal of this unit to the REMOTE CONTROL IN terminal of the component to be connected.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Playback (Basic operation) (vpage 22) Selecting a listening mode (Surround mode) (vpage 29) HDMI control function When you make an HDMI connection with a TV or player compatible with this unit and HDMI control functions, you can perform the following operations by setting the HDMI control function of each device. nn This unit power off can be linked to the TV power off step. nn You can switch audio output devices with a TV operation.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Convenient functions Sleep timer function Adjusting the volume of the speakers The power automatically goes into standby once the set time has elapsed. This is convenient for playing sources while going to sleep. You can adjust the channel level either according to the playback sources or to your taste, as described below. Press SLEEP and display the time you want to set. The “SLEEP” indicator on the display lights.
SVENSKA Convenient functions To prevent accidental operation of this unit, you can disable operation of the buttons on the front panel. ON/STANDBY AUTO RETURN p nnDisabling all key button operations Press ON/STANDBY while you press and hold AUTO and ENTER with the unit in standby mode.
ENGLISH DEUTSCH FRANÇAIS ITALIANO Playback Press Z2 to switch the remote 1 control operating mode. The remote control unit switches to the operating mode for ZONE2. Press ON to turn on the ZONE2 2 power. The NEDERLANDS SVENSKA Adjusting the volume Use VOLUME + – to adjust the volume.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. 1.Audio Adjust 2.Information 3.Auto Setup 4.Manual Setup 5.Input Setup 1. Audio Adjust 1.Audio Adjust 1.Surround Parameter 2.Tone 3.Audyssey Settings 4.Manual EQ 5.M-DAX 6.Audio Delay [ENT]:Select [RTN]:Back 2. Information 2.Information 1.Status 2.Audio Input Signal 3.HDMI Information 4.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Examples of on-screen display and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. On-screen Display Top menu display Front Display Description MENU q Adjust w 1.Audio 2.Information e 3.Auto Setup 4.Manual Setup 5.Input Setup Audio Adjust w e q The menu items are displayed here. w The selected line is displayed here.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Method for inputting characters Method Using the keyboard screen • Operating with the remote control unit. • Select a character on the TV screen to input characters. Normal screen nnDisplay of a normal input screen 5-4.Rename Default e [SFT]:a/A [ENT]:OK • The types of characters that can be input are as shown below. q ABCDEFGHIJKLMNOPQRSTUVWXYZ GLower case charactersH abcdefghijklmnopqrstuvwxyz GSymbolsH ’ ( ) z + – .
ENGLISH DEUTSCH FRANÇAIS ITALIANO Inputting characters 1 Press SEARCH/INFO while a normal screen is 2 displayed. Display the screen for inputting characters (vpage 43 “Menu map”). A keyboard screen is displayed. a character to be changed. 3 Select q Press uio p to select “[ ]” or “[ ]”. w Press ENTER to place the cursor at the character to be changed. Each time ENTER is pressed, the cursor moves by one character. a character to be input with 4 Select uio p then press ENTER.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Input Setup Parental Lock nnAbout the display of input sources For any channel, set the radio reception limits. In this section, the configurable input sources for each item are shown as follows. BD DVD VCR SAT GAME AUX1 USB TV CD SIRIUS TUNER M-XPort NOTE Input sources that have been set to “Delete” at “Source Delete” (vpage 60) cannot be selected. Default settings are underlined.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Input Setup Preset Name Setting items Assign a name to a preset memory. Setting items A1 – G8 Select the preset channel. Setting details • Up to eight characters can be input. • For character input, see page 45. TUNER Examples of input assign menu screen displays 5-1.Input Assign Default HDMI Digi Comp BD DVD VCR SAT GAME AUX1 1 2 C2 1 2 3 4 C1 3 GAME AUX1 TV Yes : Reset to the defaults. No : Do not reset to the defaults.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Input Setup Component Set this to change the component video input connectors assigned to the input sources. DVD VCR GAME AUX1 TV Comp1/Comp2/Comp3 (Component video) None : Do not assign a component video input connector to the selected input source. • At time of purchase, the settings of the different input sources are as shown below.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Input Setup Setting items Progressive Mode Set an appropriate progressive conversion mode for the source video signal. BD SAT TV DVD VCR GAME z AUX1 z Aspect Set the aspect ratio for the video signals output to the HDMI. BD SAT TV Setting details Auto : The video signal is automatically detected and the appropriate mode is set.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Input Setup Simple version Rename Change the display name of the selected input source. Setting items • Up to eight characters can be input. • For character input, see page 45. Yes : Reset to the defaults. No : Do not reset to the defaults. Source Level Basic version Rename Change the display name of the selected input source. Default The input source name is returned to the default setting.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Surround Parameter Audio Adjust The sound being played in the surround mode can be adjusted to your liking. The items (parameters) that can be adjusted depend on the signal being input and the currently set surround mode. For details on the adjustable parameters, see “Surround modes and surround parameters” (vpage 74). Menu operation AMP to set the remote control unit to amplifier operation 1 Press mode. 2 Press MENU.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Audio Adjust Height Gain Control the front height channel volume. Setting details Low : Reduce the front height channel volume. Mid : Front height channel sound is output with standard sound volume. High : Increase the front height channel volume. Default settings are underlined. Adjust the tonal quality of the sound. Setting items Set MultEQ®, Dynamic EQ® and Dynamic Volume®.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Audio Adjust Setting items Dynamic EQ® Solve the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Works with MultEQ. Setting details ON : Use Dynamic EQ. OFF : Do not use Dynamic EQ. • is displayed when set to “ON”. • This can also be set by pressing DYN EQ on the remote control unit. Each time DYN EQ is pressed, the setting is changed as shown below.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Audio Adjust Default settings are underlined. Use the graphic equalizer to adjust the tone of each speaker. “Manual EQ” can be set when “MultEQ®” setting (vpage 53) is “Manual”. Setting items Setting details Adjust CH Correct the tone of each speaker. Default settings are underlined.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Speaker Setup Manual Setup Set when changing Audyssey® Auto Setup settings, or when changing the audio, video, display or other settings. • If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to set MultEQ®, Dynamic EQ® and Dynamic Volume® (vpage 53, 54). • Can be used without changing the settings. Please set if necessary.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Manual Setup Speaker Config. (Continued) Setting details Surround : Set the presence and size of the surround speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround speakers are not connected. Setting items Bass Setting Set subwoofer and LFE signal range playback.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Manual Setup Setting items Setting details Channel Level Test Tone Start : Output test tone. Set the volume of the test • FL / C / FR / SR / SBRz / SBLz / SL / FHL / FHR / SW : Select the tone to be the same when it speaker. is output from each speaker. zz When the “Speaker Config.” – “S.Back” setting (vpage 57) is set to “1sp”, “S.Back” is displayed.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Manual Setup Setting details Standby Source Sets the HDMI input source to put into standby when the power is on. Last : This item is set at the last-used input source. HDMI1 / HDMI2 / HDMI3 / HDMI4 : Put the respective input source into standby. “Standby Source” can be set when “HDMI Control” is set to “ON”.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Manual Setup Setting items Power On Level Define the volume setting that is active when the power is turned on. Mute Level Set the amount of attenuation when muting is on. Setting details Last : Use the memorized setting from the last session. – – – (0) : Always mute when power is turned on. –80dB – 18dB (1 – 99) : The volume is adjusted to the set level. • This can be set when the ZONE2 “Volume Level” setting (vpage 59) is “Variable”.
SVENSKA NEDERLANDS Manual Setup Setting details Information Items Status Show information about current settings. NOTE The information displayed differs according to the input source. Setting details nn MAIN ZONE This item shows information about settings for MAIN ZONE. Select Source / Name / Surround Mode / Input Mode / Decode Mode / Video Select / Video Mode / Content Type / i/p Scaler / Resolution / Progressive Mode / Aspect etc. nn ZONE2 This item shows information about settings for ZONE2.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Other settings Remote control settings • When you connect a remote control receiver unit (purchased separately) to the REMOTE CONTROL IN terminal of this unit, use the following procedure to disable the remote sensor function of this unit. • The remote sensor function of remote control signals is enabled by default.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Registering the supplied preset codes in the remote control unit enables you to operate devices made by other manufacturers. Operating AV equipment the input source select 1 Press button (vpage 22). NOTE Press the input source select buttons once to switch the operation mode of the remote control unit supplied with this unit.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Registering preset codes nnProgramming with the 4-digit code nnChecking the code 1 1 Press and hold down the input source select buttons for the appliance to control, and press SET until the SEND indicator blinks twice. The back light flashes. 2 Press the 4-digit code for the appliance using the numeric buttons (code table at the end of this book). When the procedure is successful, the SEND indicator blinks twice.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH 1 2 Operate the component. Switch the input source (vpage 22). nnCD player / CD recorder operation Operation buttons SOURCE ON/OFF Function Power on/off 6 7 Manual search (fast-reverse/fast-forward) • For details, refer to the component’s operating instructions.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Operating learn mode This remote control unit is capable of learning and storing codes used by other remote controls that you already own. For codes which are not learned, the remote control unit will transmit either the Marantz preset codes from the initial settings, or remote codes from another manufacturer’s AV equipment which is set by the customer.
SVENSKA Operating learn mode and hold down SET and 1 Press SOURCE SEL until the LEARN indicator blinks. 2 Press and hold down D.MODE and press ON and STANDBY . 3 Press ENTER to continue erasing. • The SEND indicator blinks twice and the mode returns to LEARN mode. • To cancel the erasing operation, do not press ENTER and simply press any other button.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Information Information Here, we list various information related to this unit. Please refer to this information as needed.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Front panel Display For buttons not explained here, see the page indicated in parentheses ( ). Q5 Q4 Q3 Q2 Q1 Q3 Q2 w q Decoder indicators These light when the respective decoders are operating. Q7 Q8 Q9 W0 W1 W2 W3 W4 W5 W6 w Input signal indicators e Information display The input source name, surround mode, setting values and other information are displayed here.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Rear panel See the page indicated in parentheses ( ). Q6 Q5 Q4 q Q3 Q2 Q1 Q0 w q FM/AM antenna terminals······················································ (20) w Analog audio connectors············································(16 – 18, 21) e PRE OUT connector·················································(5, 21, 34 – 36) r 7.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH q w e r t y Q9 W0 W1 W2 W3 W4 (SOURCE SEL)············································· (22) o INPUT buttons······································· (22, 42) Q0 DISPLAY/Tuner mode (T.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Remote control unit Inserting the batteries q Remove the rear lid in the direction of the arrow and remove it. Operating range of the remote control unit w Load the two batteries properly as indicated by the marks in the battery compartment. Point the remote control unit at the remote sensor when operating it. R03/AAA 30° 30° Approx. 23 ft/7 m e Put the rear cover back on.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH nn Trademark information (vpage 73) nn Surround (vpage 74) nn Explanation of terms (vpage 78) Simple version Other information Trademark information This product uses the following technologies: 73 Information SIRIUS, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All rights reserved. Service not available in Alaska and Hawaii. Advanced version Manufactured under license under U.S.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Surround modes and surround parameters This table shows the speakers that can be used in each surround mode and the surround parameters adjustable in each surround mode.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Surround Simple version Surround Parameter (vpage 52) PRO LOGIC g/gx Music mode only Surround mode (vpage 29) Height Gain (vpage 53) Panorama (vpage 52) Dimension (vpage 52) Center Width (vpage 52) NEO:6 Music mode only Center Image (vpage 52) Audyssey Settingsz11(vpage 53) Tonez7 (vpage 53) MultEQ® (vpage 53) Dynamic EQ®z8 (vpage 54) Dynamic Volume® z9 (vpage 54) M-DAX z10 (vpage 55) PURE DIRECT (2 channel) PURE DIRECT (Multi-ch
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Surround nnTypes of input signals, and corresponding surround modes This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode. Symbols in the table S This indicates the selectable surround mode. Input signal types and formats PCM NOTE Surround mode (vpage 29) DTS SURROUND DTS-HD MSTR DTS-HD HI RES DTS ES DSCRT6.1 DTS ES MTRX6.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Surround Simple version Input signal types and formats PCM NOTE Surround mode (vpage 29) z2z4 z1z4 z3 z1z4 z1z4 S PURE DIRECT MULTI CH STEREO STEREO NEURAL AUTO S S S S S z1 z2 z3 z4 DTS-HD High Resolution Audio S S S S S S S S LINEAR PCM LINEAR PCM (multi ch) (2ch) S S S S S S S S S S S DTS DTS-HD Master Audio DOLBY DOLBY DIGITAL DOLBY DOLBY DOLBY DIGITAL EX DIGITAL EX DIGITAL Plus (With no (With Flag) Flag) DTS EXPRESS D
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Explanation of terms A A2DP A2DP is one profile of Bluetooth definded for in-car devices or AV devices that use wireless communication instead of a cable. Adobe RGB color / Adobe YCC601 color Like x.v.Color, each of these color spaces defines a palette of available colors that is larger than the traditional RGB color model.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Explanation of terms S Sampling frequency Sampling involves taking a reading of a sound wave (analog signal) at regular intervals and expressing the height of the wave at each reading in digitized format (producing a digital signal). The number of readings taken in one second is called the “sampling frequency”. The larger the value, the closer the reproduced sound is to the original.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the user guide? 3. Are the other components operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
SVENSKA NEDERLANDS FRANÇAIS DEUTSCH Page 15 58 • Check the connection of the HDMI connectors. • Set the input source to match the connected HDMI connector. • Check whether the TV is compatible with copyright protection (HDCP). If connected to a device not compatible with HDCP, video will not be output correctly. 15 15, 22, 48 14 58 39, 58 Symptom Symptom Cause/Solution When a USB • The set cannot recognize a USB memory device. Check the memory device is connection.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL GiPodH Symptom Cause/Solution Page iPod cannot be played. • Check the iPod connections. • Switch the input source to “USB”. • Incompatible iPod types cannot be played back. 19 22 19 “Connection Error” is displayed. • Unable to communicate properly. Turn off the power to this unit, disconnect the iPod and then reconnect it. – “Not Support” is displayed. • The iPod connected to the unit is not compatible.
SVENSKA NEDERLANDS nn Tuner section Receiving Range: Usable Sensitivity: 50 dB Quieting Sensitivity: S/N (IHF-A): Total harmonic Distortion (at 1 kHz): nn General Power supply: Power consumption: [FM] (Note: μV at 75 Ω, 0 dBf = 1 x 10–15 W) 87.5 MHz – 107.9 MHz 1.2 μV (12.8 dBf) MONO 2.8 μV (20.2 dBf) MONO 70 dB STEREO 67 dB MONO 0.7 % STEREO 1.0 % [AM] 520 kHz – 1710 kHz 18 μV AC 120 V, 60 Hz 650 W 0.2 W (Standby) 3 W (CEC standby) 440 (W) x 161 (H) x 389 (D) mm 11.
ENGLISH DEUTSCH FRANÇAIS DTS······························································· 30, 78 DTS 96/24··················································· 30, 79 DTS-ES Discrete 6.1··································· 30, 79 DTS-ES Matrix 6.
List of preset codes / Liste de codes préréglés / Lista de códigos pre-ajustados Device select : BD Samsung Blu-ray Disc Player D H I J L M O P R S T Y Denon Hitachi Integra JWC LG Marantz Mitsubishi Onkyo Panasonic Philips Pioneer RCA Samsung Sharp Sony Toshiba Yamaha 5034, 5035, 5036 5031, 5032, 5033 5013 5014, 5015, 5017, 5018, 5019, 5020 5010, 5011 5000, 5026, 5027 5024, 5025 5013 5001, 5002, 5003 5004 5005 5012 5005 5028, 5029, 5030 5007, 5008, 5009, 5016 5012 5021, 5022, 5023 Device select : DVD
SAMSUNG SANSUI Device select : CD SANYO CD Player A C D E F G H I J K L M N O AIWA AKAI AUDIO AUDIO LABS CALIFORNIA CARVER CASIO CURTIS DENON EMERSON FISHER GE GENEXXA HARMON HITACHI INKEL JC PENNEY JVC KARDON KRELL LUXMAN LX I MAGNAVOX MARANTZ MATHES MCS MGA MISSION MITSUBISHI NAD NAKAMICHI NEC MCS NIKKO ONKYO OPTIMUS P PANASONIC PHILIPS PIONEER Q R QUASAR RCA REALISTIC S 2 ROTEL RS ORIGINAL SAE SCOTT 3001, 3002, 3003 3004, 3005, 3006 3007 3008 3008 3010, 3011, 3009 3012, 3020 3020, 3012 30
161.0 (6 3/8) 146.5 (5 3/4) 17.5 (11/16) 389.0 (15 3/8) 348.5 (13 11/16) 22.5 (15/16) Unit : mm (in) 14.5 (5/8) Dimensions / Dimensions / Dimensions 440.
D&M Holdings Inc.
