Model PMD351 User Guide Combination Stereo Cassette Deck/CD Player ® CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT
ENGLISH WARNINGS CAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3.
ENGLISH GROUND CLAMP ELECTRIC SERVICE EQUIPMENT GROUND CLAMPS WARNINGS ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) Do not expose the equipment to rain or moisture. Do not remove the cover from the equipment. Do not insert anything into the equipment through the ventilation holes. GROUNDING CONDUCTORS (NEC SECTION 810-21) Do not cover the ventilation with any items such as tablecloths, newspapers, curtains, etc.
1 2 3 4 5 6 7 8 9 10 11 ENGLISH CONTROL AND CONNECTION DIAGRAMS 12 PROFESSIONAL STEREO CASSETTE DECK / COMPACT DISC PLAYER PMD351 EJECT PLAY PLAY PAUSE STOP PLAY DOLBY B-C NR NX PRO IR TAPE PLAY /PAUSE TAPE PITCH CONT. POWER MEMO RESET CASCADE DUBB B OFF C STOP/EJECT REC/PAUSE ON OFF CD TAPE + CD TAPE CD REV MODE QUICK REVERSE ALC DOLBY NR AUTOMATIC TAPE SELECT SYSTEM CD-RW PLAYBACK HP SELECT CD PITCH CONT.
TABLE OF CONTENTS ENGLISH PRECAUTIONS WARNINGS CAUTIONS ..................................................................................................................... IMPORTANT SAFETY INSTRUCTIONS ............................................................................................ CONTROL AND CONNECTION DIAGRAMS .............................................................................................. TABLE OF CONTENTS .....................................................................
RC-5 REMOTE CONTROL COMPATIBILITY Thank you for selecting the Marantz Professional PMD351 combination Stereo Cassette Deck/CD Player. Please read these operating instructions carefully. We recommend that you read the entire user guide prior to connecting and operating the unit. It is also recommended that all connections be made prior to operating the unit. Please refer to this manual to identify controls and connections for operation of the unit.
DOLBY HX PRO HEADROOM EXTENSION ENGLISH The Dolby HX PRO system monitors the total amount of effective bias during recording and instantaneously compensates for any excess bias by reducing the deck’s bias signal level accordingly. The system operates independently on each channel. HX PRO is unlike a noise reduction system because it functions only during recording and no decoding is required.
mode, this function is used along with the NEXT/ to select SEARCH FAST FORWARD button the desired tracks to be played. PLAY Note: Automatic search operations cannot operate on the Tape and CD at the same time. TAPE b b c d e g PLAY/PAUSE button Press the PLAY/PAUSE button to change the CD player mode from CD play to CD pause or from CD pause to CD play.
16 ENGLISH CD PITCH CONTROL buttons By pressing the CD player PITCH CONTROL buttons, you can adjust the CD player playback pitch from -12% to +12% in 0.1% increments. You can return the CD player to the normal speed position by pressing the center “0” control. Pressing the center “0” control again returns it to the previous settings. CAUTION - When the CD pitch control is used, digital lock may not occur with some D/A converters connected via the CD DIGITAL OUT jack E .
23 24 25 ALC switch (AUTOMATIC LEVEL CONTROL) The ALC switch allows for automatic control of the source level during recording. When this switch is set to the OFF position, the level of recording is controlled by the manual record level adjustment. When this control is set to the ON position, the record level is set automatically. In this position, the manual record level adjustment has no effect on the recording. f g REPEAT indicator is displayed when the CD player is in the repeat mode.
REAR PANEL CONNECTIONS ENGLISH A B MIC (MICROPHONE) INPUT jack For use with microphones as the input source into the tape deck. When microphones are installed into these jacks, the line inputs are automatically switched off and only the microphone signal is input into the unit. For mono recording, insert the microphone into the L (Left) jack. TAPE IN jacks These RCA jacks should be connected to the LINE OUTPUT of your source.
Regardless of the direction that the tape transport is currently in, pressing the (Fast Forward) control button will place the tape transport in the high speed fast forward mode and the tape will advance quickly (Rewind) control from left to right. Pressing the button will place the tape transport in the high speed rewind mode and the tape will retract quickly from right to left.
CD-R/CD-RW disc play SELECTING THE TRACK ENGLISH 1. By pressing the CD-NEXT or the CDPREVIOUS buttons, you can select the track to be played. Each press of the CD button will advance the CD player to the beginning of the next track and enter into the play/pause mode. Each press of the CD button will cause the CD player to skip to the beginning of the previous track and enter into the play/pause mode. Pressing the CD PLAY/PAUSE button will resume playback at the beginning of the selected track.
The album number appears on the display. (AL xxx is displayed at f and the track at e . The player can play only those discs recorded in the music format (CD-DA) or using MP3 files. *Those items among the display information which were not recorded are skipped. Only the recorded items are displayed. If there is not much recording time, it may be difficult for the data to be read, and it may cause an error.
ENGLISH Precautions for discs recorded using MP3 files Concerning random play Random play proceeds on an album by album (folder by folder) basis. When all the tracks of the album currently playing have been played, play moves on to the next album in the sequence. During random play, the 1-track repeat and A-B repeat functions cannot be used. • The format of the files played have the “.mp3” or “.MP3” extension. Files with any other extension cannot be played.
1. By pressing the CD STOP/EJECT button and the tape eject button, you can load the CD to be dubbed onto the CD tray and a recordable tape into the tape transport. Gently press the front of each mechanism to close them. The CD display will register the general CD data and the tape play indicator located inside of the Tape PLAY button will begin to flash. 2. Prepare the tape for dubbing by rewinding it to the beginning of the first side onto which the tape is to be recorded. 3.
ENGLISH 5. Begin the recording of the first source by pressing the play control button. The unit will enter record mode. After the first source has completed recording, the next component in the cascade will begin recording. This will continue until the last unit linked in the cascade chain has completed recording and entered the Stop mode. middle of an operation, the cassette tape remains loaded and it may be impossible to eject.
Hand shake flow charts for control commands: PMD351 Typical Host Received Command Status Command • The RS-232C host can control functions of the PMD351 externally • The PMD351 automatically transmits status data when status is changed. • The PMD351 will respond to status requests by transmitting the associated status data. Host sends a command that causes a change in PMD351 status.
Response from TAPE Request Command for TAPE Status from TAPE Category ENGLISH Power "@1?18POWE"+CR Standby Power On Cassette "@1?18CASS"+CR IN Eject "@118CAIN"+CR "@118CAEJ"+CR Play Mode "@1?18PLAY"+CR Stop Play FW Play REV Pause FF REW Cue Review REC REC Pause "@118STOP"+CR "@118PLFW"+CR "@118PLRV"+CR "@118PASE"+CR "@118FASF"+CR "@118FASR"+CR "@118CUE_"+CR "@118REVI"+CR "@118RECO"+CR "@118RECP"+CR Current Time Display "@1?18TIME"+CR Memo "@1?18MEMO"+CR "@118POFF"+CR "@118PRON"+CR Power
RC-5 CODES If you have a remote control Model RC330, (not supplied – available from Marantz Professional) this unit receives the codes listed in the table below from the infrared remote control sensor 11 on the front of the unit and also RC-5 remote input jack F on the back. PMD351 CTS out Typical Host RTS send H Not Busy (Normal) L H Remote control codes (RC-5) Busy L Command Timing chart RTS CTS RxD TxD Control commands: The control command packets have a data length of 7~10 bytes.
ENGLISH CARE AND MAINTENANCE Head Cleaning If the heads are not cleaned for a long period, dirt or dust may be deposited on the heads and capstans, causing degraded high-frequency characteristics, volume drop, or degraded recording and erasure performances. To prevent this, clean the heads, capstans, etc., periodically as follows. 1. Turn the power off. 2. Open the cassette holder by pressing the EJECT button. 3.
TAPE DECK The tape does not travel. Check that: 1. the power cord is plugged in properly. 2. the POWER switch is set to ON. 3. the tape is rewound. CD PLAYER The disc falls to rotate. Check that: 1. the power cord is plugged in properly. 2. the POWER switch is set to ON. 3. the disc is placed in the correct position on disc tray. 4. the disc is placed properly with the label side facing up. 5. the disc is not dirty. 6. the disc is not scratched. 7. the disc is not warped. 8.
SPECIFICATIONS* ENGLISH TAPE DECK CD PLAYER Track system .................................. 4 Track, 2 Channel Record/Erasure system ..................... AC 105 kHz Bias Head System (Rotary type combination) Rec/Play ...................................... Hard metal alloy Erase .............................................Dual gap ferrite Channels ..................................................... 2 channels Sampling frequency ......................................... 44.1kHz Quantization ..........
PMD351 MIC IN TAPE L CD OUT IN R OUT CD TAPE+CD OUT L L R R DIGITAL OUT REMOTE RC-5 IN RS232C EXT IN MPX FILTER ON OFF FADER START CD TAPE CAUTION OUT OUT RISK OF ELECTRIC SHOCK DO NOT OPEN DANGER INVISIBLE LASER RADIATION WHEN OPEN AVOID DIRECT EXPOSURE TO BEAM or RC-5 AMPLIFIER TAPE DCC IN AUX OUT IN TUNER OUT CD PHONO L GND R CD-R (DCC/DAT) DIGITAL COAXIAL OPTICAL IN OUT IN OUT The RC-5 connections shown enable Marantz Professional cascade operation.
LIMITED WARRANTY ENGLISH How You Can Get Service Your Marantz Professional product is warranted against manufacturer defects in material and workmanship for a period of one year parts and labor. 1. Except as specified below, this warranty covers defects in material and workmanship. The following are not covered under warranty: 1. 2. 2.
R Marantz is a registered trademark.