User's Manual

ManualsBrandsMarantec America ManualsElectronicsReceiver for Garage Door Control

M5-831 Telegram Converter Radio Control

Model

M5-831 315 MHz

Data

GND

Antenna (Aerial)

Intended use

The unit may only be used as a telegram converter

for low-voltage applications.

The receiver basically comprises the HF receiver

module and the telegram converter and serves the

purpose of converting a 24-bit telegram to a stan-

dard 48-bit telegram.

The manufacturer does not assume any liability for

damage caused as a result of improper or non-

intended use!

Safety advice

Before connecting the radio control,

carefully read through the operating

instructions!

Do not make any unauthorized alterations or modi-

fications to the radio control!

Have faulty radio controls checked by the manu-

facturer!

Any changes or modifications not expressly ap-

proved by the party responsible for compliance

could void the user's authority to operate the

equipment.

Connecting

• Power supply: +V, GND

• Telegram output: Data

Note: NC = not connected

Technical data

Frequency: 315 MHz

Modulation: ASK

Power supply: 12-24 V DC

Currewnt consumption: approx. 12 mA (at 24V)

Output: Radio telegram

Label USA

Operating temperature: -20°C to +60°C

Dimensions: 52 x 37 x 14 mm

(without antenna)

Conformity

This product complies with:

FCC Code of Federal Regulations, CFR47, Part 15,

sections 15.107 and 15.109 (Class B).

Industry Canada Radio Standards, Specification

RSS-Gen Issue 1, sections 7.2.2 and 7.2.3 (cate-

gory 1, receiver)

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

M5-831 1106 GB