User's Manual

Instruction manual
( Mouse )
System requirements
IBM compatible system
Win98/Me/2000/XP
No need for driver
USB port
Mac OS 8.6 or above
Install the battery (fig. 1)
You need two batteries AAA
Press and release the battery door
Put the batteries into the mouse
Close the battery cover
Install the receiver
You can connect the receiver directly on the USB port of your notebook
If you connect on the PS2 port, you have to use a PS2 to USB adapter ( Not provided )
You can use an USB cable in order to have the receiver on your desk
ID Setup (fig. 2)
Put the receiver into the USB port of your computer
Push the ID button of the receiver, the light will blink. Push the ID button underneath the mouse
(within 10 seconds), the light of the receiver will blink quickly, and the connection between mouse
and receiver is established. The light of the receiver will blink each time you move the mouse ( ID
set up distance : 0.60 m to 1.00 m ).
After having changed the batteries, you have to reconnect the mouse with the receiver
In case of interference between equipment, change the signal codes. The interference between
equipment only happens when several mice are used at the same time.
Working distance : 0.60 m to 1.00 m
Attention
Reduce the distance between the mouse and the receiver if the mouse does not work
If the mouse will not be used for a long time, please remove the batteries
The mouse has a “sleep” function. Push any button to wake him up.
If you want to activate the “power cut”, push 3 seconds on the ID button of the mouse. This will save
the batteries. In order to activate the mouse, push again 3 seconds on the ID button.
The mouse does not function on metallic or glass surface, nor on 3D mouse pad
Open the slide cover, the mouse’s optical sensor will be automatically turned off, and can be used as a
normal calculator (fig. 3); re-cap the slide cover, the mouse will be back to normal operation.
If Mouse signal is not good enough, try either one of two antenna position (fig. 5)
Trouble Shooting
If your wireless Mouse receipt is not satisfactory, it may be due to interference from your computer
depending on environment or various computer devices.