Model # MB 00417WH # MB 00417WH-DISP USE AND CARE GUIDE MARIANA 6 LIGHT PENDANT Questions, problems, missing parts? Before returning to the store, call Manor Brook Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 904-642-4340 THANK YOU We appreciate the trust and confidence you have placed in Manor Brook through the purchase of this light fixture. We strive to continually create quality products designed to enhance your home.
Table of Contents Safety Information .................................................... 2 Assembly ..................................................................... 5 Warranty ................................................................... 2 Installation ............................................................5, 6, 7 Pre-Installation .......................................................... 3 Care and Cleaning ........................................................
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. Inspect each part for defects that may have occurred during shipping. Keep your receipt and these instructions for proof of purchase. NOTE: This light fixture requires the use of six 120V, 60Hz, 60-Watt max, medium-base type A bulbs (not included). Do not exceed the recommended wattage.
Pre-Installation (continued) PACKAGE CONTENTS A B C D Part Description Quantity A Canopy assembly 1 B 6 inches extension tube 1 C 12 inches extension tube 3 D Fixture body 1 4
Assembly Installation 1 1 Assembling the light fixture Carefully unpack the fixture, lay out all parts on clean surface. Feed the fixture body (D) wires up through the 12 inches tubes (C) and then the 6 inches tube (B). The number of tubes you use depends on the length you desire for the installed light fixture, remove the nipple from tube if needed. Attach the desired number of tubes (B and C) to the socket assembly by twisting the tubes in a clockwise direction.
Installation (continued) 2 Connecting the wires Install the fixture bare ground wire (1) under the ground screw (EE) on the mounting plate (BB). Connect the fixture bare ground wire (1) to the green (or bare, or green & yellow )supply ground wire (2) in the outlet box using a wire nut (AA). Connect the white fixture wire (3) to the white (or ribbed) supply wire (4) in the outlet box using a wire nut (AA).
Care and Cleaning Clean the light fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives. Troubleshooting Problem Possible Cause Solution The bulb will not light. □ The bulb is burned out. □ Replace the light bulb. □ The power is off. □ Ensure that the power supply is turned on. □ There is a faulty wire connection. □ Check the wiring. □ The circuit breaker is off. □ Ensure that the circuit breaker is set in the on position.
Questions, problems, missing parts? Before returning to the store, call Manor Brook Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 904-642-4340 Retain this manual for future use.