MANLEY LABORATORIES, INC. OWNER'SMANUAL MANLEY LAB SERIES DELTA SIGMA DIGITAL TO ANALOGUE CONVERTER MANLEY LABORATORIES, INC. 13880 MAGNOLIA AVE. CHINO, CA.
CONTENTS SECTION PAGE INTRODUCTION 3 MAINS CONNECTIONS 4 CONNECTING YOUR CONVERTER 5 OPERATIONAL NOTES 6 SPECIFICATIONS 7 WARRANTY 8 WARRANTY REGISTRATION 9
INTRODUCTION THANK YOU!... for choosing the Manley LAB SERIES DELTA SIGMA DIGITAL TO ANALOGUE CONVERTER. Designed by David Manley, the CONVERTERS use only the best available components, with the shortest and cleanest signal path possible. The circuit and the components used have been chosen carefully after years of development and refinement for reliability, constancy and most importanly, musical, accurate, and emotional delivery of the sound.
MAINS CONNECTIONS Export units for certain markets have a moulded mains plug fitted to comply with local requirements. If your unit does not have a plug fitted the coloured wires should be connected to the appropriate plug terminals in accordance with the following code.
CONNECTING YOUR CONVERTER Setting up your converter is rather easy. 1. Connect all source components (turntable, CD, Tuner, Tape DAT, etc.) to your preamplifier as normal, reserving one pair of inputs for the converter. The usual choice is the CD inputs and not using the CDs internal (infernal) converters and audio outputs. 2. Connect the RCA SPDIF interconnects from the output of the CD or DAT to the RCA SPDIF input on the back of theconverter. Use digital interconnects for best performance.
OPERATIONAL NOTES TUBE LIFE You should expect extended life from the tubes in your MANLEY CONVERTER and we expect the tubes to not need replacement for many many years. We stock the tubes in these converters should you ever need replacements (and at very reasonable prices too!). Replace only with good quality 12AU7WA or ECC82 types. FUSES The fuses used in your amplifier are standard 1 amp SLO-BLO types. The correctly rated fuse has been installed at the factory for your country's voltage.
SPECIFICATIONS This page is unintentionally blank.
WARRANTY All Manley Laboratories equipment is covered by a limited warranty against defects in materials and workmanship for a period of 90 days from date of purchase to the original purchaser only. A further optional limited 5 year warranty is available to the original purchaser upon proper registration of ownership within 30 days of date of first purchase.
WARRANTY REGISTRATION We ask that you please fill out this registration form and send the bottom half to: MANLEY LABORATORIES REGISTRATION DEPARTMENT 13880 MAGNOLIA AVE. CHINO CA, 91710 Registration entitles you to product support, full warranty benefits, and notice of product enhancements and upgrades. You MUST complete and return the following to validate your warranty and registration. Thank you again for choosing to use Manley Laboratories. MODEL ____________________ SERIAL No.