Plaza UPM Instruction Manual Notice For your safety, please read this manual carefully and make sure you understand the provided instructions. Warnings, Cautions and Notes Throughout the whole manual, pay special attention to the following marks that indicate hazardous situations. Caution Indicates a condition, if not avoided, could damage the equipment or apparatus. Warning Indicates a hazardous situation, if not avoided, could result in serious injury.
User’s Manual Safety Instructions and Precautions The socket-outlet shall be installed near the equipment and shall be easily accessible. Avoid placing any items and blocking ventilations on the top. Ventilations blocking can cause fire Avoid cleaning the surface with Detergents, Benzene or Volatile gasoline. Color can be damaged. Disconnect the power and the antenna if not used for long period or during thunderstorm. If there is smoke or burning smell, turn off & un-plug the set immediately.
1 Before You Begin 1.1 Features MPEG-2 & Fully DVB Compliant MPEG-2 Video (MP@ML), MPEG-1 Audio Layer1, Layer 2 PLL RF-Modulator UHF 21~69 with PAL I / G / B / D / K LNB Controlling Logic SCPC/MCPC Receivable from C / Ku-Band Satellites Digital Tuner with Loop-through Wide Symbol Rate 1~45Mbps & Frequency Input 950 ~ 2150MHz USALS & DiSEqC 1.
2 Controls and Functions 2.1 Front Panel Item Description 1. STANDBY Button Turns the receiver On/Off. 2. CH Up/Down Buttons Changes channels in viewing mode and moves the cursor (▲ /▼ ) up/down in menu mode. 3. Volume Up/Down Buttons (◀/▶) 4. Display Increases/ decreases the volume levels in viewing mode and changes settings in menu mode. The 4-digit displays channel information. In STAND BY mode, (4-digit 7-segment) it displays the local time. The red LED is STAND BY indicator. 2.
. RS-232C To connect a Set-top box or a Serial Port of PC 6. TV OUT UHF RF Out to connect to a conventional TV 7. AERIAL IN Connect the TV antenna to the Aerial In. 8. AUDIO, VIDEO CVBS VIDEO and Audio L / R Out to connect to TV. Connect Red and White connector to Audio L/R, and Yellow to Video respectively 9. AC 100-240V ~ 100~240V AC, 50/60Hz Mains Power Inlet. Connect Power 50/60Hz Max 20W Lead to this connector. 10. POWER (Switch) To switch the power to Set-top On or Off.
2.3 Remote Control Unit All receiver features can be controlled with the remote controller. Button 1. POWER Description Turns the receiver On/Off. MUTE Turns the sound on/off. Freeze Changes Live Screen to Pause or Resume. FUNC Zoom, Multi Picture. TV/STB To switch between TV and STB mode. TV/Rad Switches between TV and Radio. A/V+ Select video mode (4:3, 4:3 Letter Box, 16:9) and audio mode (Left, Right, Stereo, Joint) Option To select Audio, Teletext and Subtitle language.
Button Description To move left/right or change settings in menu mode. To ◀/▶ ( / ) adjust audio volume level in viewing mode. ▲/▼ ( / ) To move up/down in menu mode. To change channel in viewing mode MENU To enter the Main menu for installation and other settings. A to Z To sort the channels automatically in alphabetical order. EXIT Exit from the present menu and moves to the previous menu. EPG To display channel program guide. 4 .VOL+/- Changes the volume level in viewing mode.
JUMP▶ Forward Jump, Playback and Timeshift JPEG Display the JPEG list. A-B Set the block to repeat, copy and cut. MARK Set the bookmark. JUMP Jump to book marked point. 3 Connections 3.1 Connecting to TV & VCR Receiver to TV with RF, CVBS and SCART connections. 1. Connect the TV antenna to AERIAL IN of receiver. 2. Connect the RF-IN of TV/VCR to RF-OUT of receiver. 3. 8 Connect the Video and Audio of TV/VCR to the Video and Audio RCA connectors.
3.2 Connecting to Dish Single fixed Dish Connect the satellite antenna cable to DISH IN. 4 Fixed Dishes Using a DiSEqC switch Connect the output of DiSEqC 1.0 switch to DISH IN of the receiver. Motorized Dish Using DiSEqC 1.2/USALS Connect the input of DiSEqC 1.2 motor to DISH IN of the receiver and output of motor to LNB.
4. Menu Overview 4.1 Menu Instruction Press the MENU button to display the main menu. Select the sub menu using the ▲/▼/◀/▶ button. The selected sub menu is highlighted. When you have selected the sub menu you want, press the (OK) button. When you want to return to the previous menu, press the (EXIT) button. When you want to return to viewing mode, press the Menu button. 4.2 Menu Help In the menu, short information is displayed at the bottom of the screen. : Using ▲/▼ button. : Using P+/P- button.
Time Setting: Setting current time. Parental Control: Change the password and select the censorship classification OSD Display: Setting OSD display time and transparency. Channel Reservation: Reserving channels you want to record at your desired time. Sorting: Choose the channel sort type, such as by Transponder, Network, CAS. Delete: To delete Satellite or channels such as TV/Radio, CAS related, etc. Advanced Reset Factory Default: Restore the receiver to the default values.
1.Select the desired satellite using the ▲/▼ button. 2. Press the button to confirm and go to the next step. 1. Select LNB Type using the ▲/▼ button. 2. Press the button to confirm and go to the next step. 1. If you use a DiSEqC 1.0 switch, select DiSEqC option using the ▲/▼ button. 2. Press the button to confirm and go to the next step. 1. After all settings are done press the button to start scanning.
5.2 Installation 5.2.1 Dish 1. Press the Menu button to display the main menu. 2. Press the button on the sub menu. The password pop-up window appears. All sub menus such as Dish, Auto Scan, Manual Scan, and SAT/TP Edit on the Installation are locked by password. The default password is "0000". Use the ▲/▼ buttons to move up or down in this menu. In any item, such as Dish, Satellite, Transponder etc use the ◀/▶ buttons, to enter or to change the settings. Dish 1.
LNB Type 1. Select the LNB Type. If you select User Single or User Dual, enter LNB Local Oscillator (LO) frequency using 0 ~ 9 buttons, and press the button. If you select LNB Type as 9750/10600, 9750/10750 or User Dual, 22KHz value is fixed to auto mode. In other cases you can select On or Off. Switch Type (select Switch Type if used) 1. If you use a DiSEqC 1.0 switch, select DiSEqC. Then select one of the DiSEqC inputs on the Option. 2. If you use a DiSEqC 1.1 switch, select SMATV.
USALS Option Go to Position: Press the button to move the motor to the satellite position calculated by the Longitude and Latitude. Go to 1. Select Auto Scan, Manual Scan or Blind Scan and press the Button. 5.2.2 Auto Scan You can search the channels offered by the satellite that has been configured to your antenna. 1. Select the satellite for scanning using ▲/▼button and press the button. The check mark indicates which satellite has been selected.
1. If you press the EXIT button whilst it is scanning for channels, pop-up window appears for the options of saving the changes. When you complete scanning for channels, a similar pop-up window appears. 2. If you want to save the updated channels, select 'Yes' and press button. 5.2.3 Manual Scan 1. Change to the specific Transponders you want to scan. 2. Press the button to start the manual scan. Dish: Select satellite for the manual scan.
press the button to close the pop-up menu. 5.2.4 SAT/TP Edit 1. Press the red button and select the satellite using ▲/▼buttons on the left. Press ◀/▶ button to move to the transponder on the right. Press red button to eidt. 2. Select Delete, Edit or Add from the popup window. (The satellite and transponder cannot be deleted if the channels of the selected satellite have already been Downloaded) 3. If you select Edit or Add a popup window appears. Edit the parameters as desired using 0 ~ 9 buttons.
Subtitle 1-2: Change the subtitle language that you watch. 5.3.3 Time Setting 1. Select the Time Setting option using the ▲/▼ ◀/▶ buttons. 2. After setting press the button, to save the changes and exit. Time Mode: Select TDT (receives the time from broadcaster) or User Mode (set time manually) Offset: Set the time difference between GMT and the local time. Day light saving: Enable will advance time by one hour. Start day: Daylight saving start day. End day: Daylight saving end day. 5.3.
mode. In viewing mode press the button and adjust the levels accordingly. 5.4 Channel 5.4.1 Reservation You can reserve up to 8 channels. The channel will come on at your desired time. 1. Press the red button to add a channel or green buton to edit the reserved channel. And then use the ▲/▼ ◀/▶ button to set the detailed settings for your reservation. 2. To delete the reservation press yellow button. 3. After all settings are done, press OK button to save.
CAS: Channels are sorted into Scrambled and Free channels order. 5.4.3 Delete To delete you can select Mode such as Channel, Satellite and CAS. Then in Option you can select the detailed items to delete. 1. Select the Mode and Option you want to delete channels using the ▲/▼/◀/▶ button. 2. Press the button to delete and exit. 5.5 Advanced 5.5.1 Reset Factory Default 1. If you want to reset the set to the default values, select yes and press the button. 5.5.2 Software and Channel Upload 1.
3. Select the data type you want to transfer to USB device. 5.6 Status 5.6.1 Information 1. To display the system information such as Model ID, Hardware version and Software version. 5.7 PVR 1. PVR Setting In this menu, you can set Record, Time shift size (Auto or Manual) and default Record Time. If Time Shift is Auto, whenever user changes the channel, time shift is activated automatically. If Manual, time shift function doesn’t work. To force Time Shift in PVR, press T.Shift button. 2.
6. Viewing General Information 6.1 Banner Information 1. When you press the INFO button, the banner information appears for a few seconds. 2. If you press the INFO button again, the detail EPG window appears on top of banner and you can use ch +/- buttons to change channels and display its EPG. 3. If '▶' exists on the Banner, press the ◀/▶button to display the next EPG. 6.2 Changing to TV or Radio Mode Press TV/Rad button to select Radio mode. Press again to re select TV mode. 6.
6.3.1 Watching Mode Press the button to display the channel list. Several icons are displayed at the bottom of the list each has a special and convenient function for use. If you want to change the mode, press the green button to select a desired function. 1. Press the ▲/▼ button to move the cursor. 2. Press the P+- button when to go to the next or previous channel page. 3. Press A-Z button if you want to sort the channel list alphabetically.
3. Using the ▲/▼/◀/▶ button and the button rename the channel. 4. After renaming, select Done tab and then press the button. Finally press the EXIT button. You can rename the Favorite group. 1. Select the desired group. 2. Change the name of group as per above procedure. Space: Space between two characters. Back: Delete characters. Caps: Change between caps and lower case letter. Done: To save the changes. Cancel: Exit rename mode. 6.3.5 Lock Mode 1. Select Lock Icon using the green button. 2.
6.4.1 Audio Language 1. Select the 'Audio' using the ◀/▶ button. 2. Press the ▲/▼ button to select a desired audio language then press the button. 6.4.2 Teletext Language 1. Select the 'Teletext' using the ◀/▶ button. 2. Press the ▲/▼ button to select a language. 3. Press the butto. Teletext in the selected language is displayed if available. 6.4.3 Subtitle Language 1. Select the 'Subtitle' using the ◀/▶ button. 2. Press the ▲/▼ button to select a language. 3. Press the button. 4.
6.6 FAV/SAT While watching TV or listening to Radio, press the FAV/SAT button. You can select a Favorite group. 6.6.1 Satellite 1. Select the 'Satellite' using the ◀/▶ button. 2. Press the ▲/▼ button to select a Satellite. 3. Press the button, to display the channel list for the selected Satellite. 6.6.2 Favorite 1. Select the 'Favorite' using the ◀/▶ button. 2. Press the ▲/▼ button to select a group. 3. Press the button, to display the channel list for the selected group. 6.
2. You can move the focus using the ▲/▼ ◀/▶ Up/Down/Left/Right buttons. 3. Press the EXIT button to exit this mode. Zoom mode supports the function of enlarging Screen by X2, x3, x4, x5 and x6. 6.9.2 Multi Picture 1. Select the Multi Picture mode on the function bar. 2. Select the desired channel using the ▲/▼/◀/▶ Up/Down/Left/Right buttons. Press OK button. 3. Press the EXIT button to watch the channel in full size. Multi Picture supports 4, 9, 10, 13 and 16 partition. 6.9.3 Live Screen Pause/Resume 1.
7. 1.1 Playback mode 1. Select the recorded file using the ▲/▼buttons. 2. Press the OK button to play the file. 3. Press the STOP button to stop playback. 7.1.2 Delete mode 1. Select File and press OK popup window will appear. 2. Select Delete and press OK confirmation popup window will appear. 3. Select yes and press OK. 4. Press the EXIT button to exit. 7.1.3 Rename mode 1. Select the file to rename and select Rename an editing keypad will be displayed. 2. Rename the file using ▲/▼/◀/▶ and Ok buttons.
7.2 PVR Banner To access the PVR Banner, press PVR Info button. Current channel name Current position Record time Time gap PVR Control position Progress Bar The description of icons : Time Shift status : Recording status : Time Shift and record status : Playback, Rewind and Forward statuses. : Time Shift Playback, Rewind and Forward statuses. : Recording playback, Rewind and Forward statuses. 7.2.
as changing channel, etc. Press STOP (■) button to stop recording. Max duration time for recording is set to the default record time and is set in PVR Setting. If you want to change the duration, press the ◀/▶ button (Minimum: 5 minutes, Maximum: 10 Hours) 7.2.2.1 Recording and playback of the same channel simultaneously 1. Press the Record (●) button on the desired channel 2. Press the REW (◀◀) button and use the ▶▶/ ◀◀/◀/▶ button to go back to the position you want to watch. 1.
2. Press the OK button to view the channel list 3. Select the channel you want to watch using the ▲/▼ button 7.2.3 Playback 1. Press the PVR List button to open the file list. 2. Select the file you want to watch using the ▲/▼ button. 3. Press the OK or PLAY/Pause (▶II) button 1. Press the Exit or PVR List button to exit from the file list 2. Press the ◀/▶ or REW, FF, etc., if you want to check status of playback. 1. Press a numeric button (0-9) in Playback mode 2. Each number represents the value of 10.
small bar will be placed at that position. 3. To delete a Bookmark, move the control using the ◀/▶ button to the desired Bookmark and press the MARK button. 4. Press the JUMP button and the control will move to the next Bookmark position and playback starts from this point. The maximum number of the Bookmarks is twenty in a file. 7.2.4 FF/REW/SLOW mode These functions are available in Playback and Time Shift mode. Fast Forward Speed: x 2, x 3, x 4 1. Press the FF (▶▶) button x 2 speed will turn on. 2.
3. Press the A-B button to set the starting point and then move the control to ending point using the ◀/▶ button. 4. Press the A-B button again on the ending point. 5. Press the A-B button to cancel setting block. 8. Other Functions 8.1 Image Viewer Connect the USB device to the receiver then after it has initialized, press the JPEG button on the remote control. 1. Select JPEG file by using the ▲/▼ buttons and press the OK button. 2. Press the ◀/▶ button to select next JPEG images in current folder. 8.
8.2 Picture In Picture (PIP) 1. Press the PIP button to display PIP. Press the PIP button repeatedly to change the size of sub-picture or to close the sub-picture. PIP function will only show another channel from the same TP. 2. When in PIP mode, press the Yellow (F3) button to swap main-picture with subpicture. 3. Press the Red button to move the position of sub-picture. 4. To display the service list of main-picture, press the OK button. To display the service list of sub-picture, press the Green button.
No front panel display The power cord is not plugged in. Check power switch on back panel is turned on. No picture or sound Wrong connection of the Audio/Video outputs of the receiver to TV. Ensure TV is tuned or switched to correct input. Wrong connection of the antenna. Check LNB connections are not shorting. No or Bad signal message appears. Check other device connected between Antenna and the receiver, or adjust the antenna position. Audio muting Press the MUTE button No or poor signal.
LNB Tone Switch 22 KHz +/- 2 KHz, 0.6 Vpp +/- 0.2V DiSEqC Control Version 1.2, Tone burst A/B Demodulation QPSK Symbol Rate 1~ 45Msps/SCPC, MCPC 2. MPEG Parameter Specifications Transport Stream MPEG-2 ISO/IEC 13818 Transport Stream Specification Input Rate Max.15Mbit/s Video MPEG-2 MP@ML Audio MPEG-1/2 Audio Layer 1,2 Aspect Ratio 4:3, 16:9 Video Resolution 720x576 (PAL), 720x480 (NTSC) Audio Mode Stereo, Dual channel, Joint stereo, Mono Audio Sampling Frequency 32 / 44.1 / 48KHz 3.
Input Voltage 90 ~ 260 VAC (SMPS) Power Consumption Maximum 23W Weight 1.5 Kg approx. Operating Temperature 0'C ~ 40'C Storage Temperature -40'C ~ 65'C 6. Card Slot Parameter Embedded Specifications 1 Slot Smart card Factory or default Password: 0000 --------------------------------------------------------------------------------------------------------Master Password: Press MENU and go to Information. Enter 6699, it will reset password to 0000.