For Best Results Bo nok throw away packaging materials until assembly Is complete, Assemble item on a soft surface, such as cardboard or carpet, to protect finish. Proper assembly requires two people.
Included in this Package — 01 LOWER TOP x1 -— Maximum 02 RIGHT/LEFT SIDE x2 [IY de elt ed.
Step 3 Insert ten screw B into part 05 and 07. Tighten to the limit. B MINI FIX SCREW x10 Prepare the pieces Step 1 Insert the wooden dowels {G) into It’s Important to glue parts 02, 03 and 04. Remember to use the wooden dowel. the glue (M). It's Important to glue the wooden dowel. G 6X30MM WOODEN ™M WHITE GLUE: ry Step 2 Insert the wooden dowels {G) into parts 07 and 08. Remember to use the glue (M).
Prepare the pieces Step 4 Put the parts 01 and 02 together and use two screws (E) and the Allen wrench {F}. FALLEN WRENCH x1 E7X50 SCREW +) Step 5 Put the parts 01 and 03 together and use two screws (E) and the Allen wrench {F). — FALLEN WRENCH p [vei E 7X50 SCREW x2 Step 6 Put the parts 01 and 02 together and use two screws (E) and the Allen wrench (F).
Assembly Step 7 Put feet on part 01 as the drawing. On each foot (L), use two screws {I} with the Allen wrench (F}. Hr FLATFEET ALLEN WRENCH x1 nnn 11/4X38MM SCREW x8 Step 8 Insert the screw (H) through parts 02 according to the drawing using the Allen wrench (F). The screw (H) must fix parts 02 on the feet (L).
Assembly Step 9 Put the glue (M) in the wooden dowel (G) already fixed into parts 04. Then put parts 04 together with part 01. It’s important to glue the wooden dowel. WHITE GLUE: x1 Step 10 Put the glue (M) in the wooden dowel (G) already fixed into parts 02 and 03, then fit part 05 on the parts 02 and 03. Insert six mini fix connectors {C) on parts 02 and 03 as shown and rotate clockwise. It’s Important to glue the wooden dowel.
Drawers Step 11 Fix parts 07 and 08 on part 10 using four screws (K). K3,5X40MM SCREW x8 — It's important to glue WHITE GLUE the wooden dowel. Step 12 Insert the drawer bottom 09 into their drawer. Step 13 Insert two mini fix connectors {C) on parts 07 and 08 as shown and rotate clockwise. Tighten to the limit.
Drawers Step 14 Put the cover (D} to the mini fix connectors (C) in all drawers. 0 D 21MM SCREW COVER MINX) Step 15 Insert the screw (J) from inside the drawer, tighten into the handle (A) on the outside.
TAKING GOOD CARE OF YOUR FURNITURE Cleaning and caring instructions: Wipe the wood furniture down with a moist cloth to properly clean the furniture. Do not forget to dry your furniture out. Humidity can damage the finish or create mold. Chemical products are not recommended; Never clean the furniture with scouring powders, steel scrubber pads or any other product which can scratch its Furniture surfaces should not be covered with colored plastic or paper sheets.