User's Manual

SETSET
C/FC/F
--
AA 1.5VAA 1.5V
++
--
AA 1.5VAA 1.5V
++
SETSET
C/FC/F
--
AA 1.5VAA 1.5V
++
--
AA 1.5VAA 1.5V
++
OUTOUT
11
Date Setting:
Scroll to date mode using MODE
Press HOUR/+/MAX to set month
Press MINUTE/-/MIN to set date
Weekday is automatically determined
from the year/month/day setting
DATE, YEAR & ALARM SETTING
a
b
c
d
February will have either 28 or 29 days
depending on the year setting
Year Setting
Scroll to YEAR mode using MODE
Press + or - key to adjust year
e
f
P.6
c
a
e
d
f
battery installation
GETTING STARTED
remove battery cover
2 AA size batteries (WS295)
2 AA size batteries (WT460H)
(included)
Insert between terminals observing
proper polarity then replace cover
1
2
3
4
WS295+WT460H
Wireless Weather Station
with weather forecast
OWNERS MANUAL
Congratulations on your purchase of this weather
station, WS295. Please take the time to read and
understand this manual so you can begin to enjoy
the convenience and features this product has to
offer.
The WS295 is a weather station device that has
several weather related functions. The main
features are:
Main Display Unit:
*
*
*
*
*
*
*
*
*
*
*
Remote Sensor WT460H:
* drip-proof design with LCD
* temperature display in user-selectable C or F
* humidity display
* transmission range: up to 40 meters in open area
* battery type: 2 x AA size
Perpetual Calendar
Local temperature and humidity display
Pressure reading display
Receives and monitors temperature and humidity
from up to 3 remote sensors via RF technology of
433MHz
Maximum/minimum temperature records
Temperature and humidity trend indicator
Pressure historical bar graph
Temperature alarm (local and remote)
Animated weather forecast symbols
Moon phase symbols
User-selectable C or F
Battery: 2 x AA size
GETTING STARTED
button placement
1
6
2
3
4
5
MINUTE/-/MIN: shows minimum temperature; adjusts
clock, alarm, date & year and temperature alarm values
SNOOZE/MODE: scrolls through Clock 1 & 2, Alarm 1 & 2,
Date & Year, and Temperature Alarm(high & low) mode;
snooze for alarm
Table Stand
ALARM/(C/F): toggles between C and F, 12 and 24 hour
format, Alarm 1 & 2 on and off; disables (resets) high &
low temperature alarms
CHN: scrolls through remote channels (1 to 3); scrolls
through local and remote channels (1 to 3) in (high &
low) temperature alarm mode; activate learn process
HOUR/+/MAX: shows maximum temperature; adjusts
clock, alarm, date & year and temperature alarm values
Synchronization
1
1
2
2
3
4
SETUP
Automatic Learn Function:
Manual-Learn (Searching for Remote Signals):
Learn function executes automatically and runs for approximately
3 minutes when batteries are first installed in the receiver.
Press and hold CHN for 3 seconds to start
If a new remote sensor is added or if signal is lost (outdoor display
blinking), learn function must be executed again.
Within these 3 minutes, receiver picks up the temperature &
humidity signals from remote sensor and displays the readings.
Beep sound indicates that
learn function has started
'Outside' symbol will flash and
unit will beep as each remote
sensor is detected
Temperature & humidity readings of
remote sensor displays on the receiver.
Clock 1 Setting:
Press and hold MODE for 3 seconds to enter the clock setting mode
(the CLOCK 1 symbol appears and the time will flash)
Press HOUR to set the hour and MINUTE to set the minute;
Press ALARM/(C/F) during clock setting, to change between
12 and 24 hour display. This also will end clock setting
(to clear the second record by pressing CHN key)
Press MODE or do not press any key for 1 minute to finish
clock setting.
Clock 2 Setting:
Scroll to Clock 2 mode using MODE
Press + or - key to change the hour
(in one hour increments/decrements relative to Clock 1)
CLOCK SETTING
Manual clock setting
i
ii
iii
iv
vi
v
P.1
P.5 P.7
P.4
P.8
WS295
receiver
2
2
1
LOW BATTERY INDICATION:
Receiver: Low battery indicator will display continuously when batteries
need replacing.
On transmitter, will be displayed
P.2
Alarm 1and Alarm 2 Setting
Scroll to Alarm1 mode (Alarm2 mode)
using MODE
Press HOUR to set hour
Press MINUTE to set minute
Press ALARM to toggle alarm on and off
When the alarm is set ON, the bell symbol will appear
When Alarm Sounds
or will flash
Press SNOOZE to snooze the alarm for
5 minutes.
After that the alarm will sound again.
Press ANY other key will shut off the alarm.
Without interruption, alarm will shut off
automatically after one minute.
DATE, YEAR & ALARM SETTING
1
1
2
2
3
3
4
5
1
2
2
1
4
5
P.3
i
iii
iv
v
vi
ii
Moon Phase Display
MOON PHASE
The moon phase is automatically updated
according to the year/month/day.
New Moon
Young Crescent
First Quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Last Quarter
Old Crescent
1
2
8
7
6
5
4
3
2
WT460H transmitter
7
10
11
8
9
SET: enter to House code and Channel
setting mode
C/F: change between C or F, change
channel and house code
Battery compartment
LCD display
Wall Mount Holder &
Table Stand
7
8
99
setting remote transmitters
* Use a different house code if your weather station detecTs other
signals from neighboring sources
* Factory default: house code = 01 and channel = 01
2
4
6
33 55 77
11
1
1
1
%
1
1
OUT
1
1
4
3
OUT
1
OUT
1
1
4
3
1
2
3
5
4
6
9
10
b
f
3
11
OUT
1
OUT
1
4
3
1
4
5
Insert batteries to start setup
HOUSE CODE will flash for 8 seconds
Select HOUSE CODE (1-15) by pressing C/F
CHANNEL will flash for 8 seconds
Select CHANNEL(1-3) by pressing C/F and
pressing SET
2
Transmitters for each receiver must be set to
the same HOUSE CODE and pressing SET
6
7
Humidity & Temperature will display
Select C or F of Temperature by pressing C/F
and pressing SET